Software
Houzz Logo Print
flgator_gw

Mower for 1.25 acres

17 years ago

Just moved to a house with a much bigger lawn than I'm used to (1.25 acres). I'm wondering if the time I would save with a zero turn mower would make it worth the extra money. I live in Florida, so in the summer I will probably be mowing every weekend. I was thinking a Craftsman in the 3K range. Would that be overkill? If so, I looked at a 2 year old craftsman 42 with a 24 HP Briggs and Stratton that I could get for $1200 with a bagger. How does that sound.

Comments (11)

  • 17 years ago

    A little more info. The lot is flat except for a septic tank. Few obsticles. Why Craftsman? Consumer Reports ranks it well but I'm not married to it.

  • 17 years ago

    I'd go find your local Hustler dealer. Much tougher mowers. Also check out your Toro dealer. If your lawn is finely manicured, no roots or rough spots, you won't need a welded deck. A stamped deck won't take as much punishment as a welded deck though. It depends on how much your time is worth to you. Zero turns will speed up your mowing for sure, but are more expensive.

  • 17 years ago

    Some "old" advice, but still pertinent:

    Repost of Slammer's Rules...

    1. Carefully evaluate the size mower you need and buy at least one size larger.

    2. NEVER buy a mower from ANYPLACE that will not let you test drive it or at least a similar model. Ergonomics are just as important as performance and capability.
    (Vitally important!). Your back/butt will thank you.

    3. DO NOT base your purchase on price or brand name alone! Do proper research and find all of the available models that fit your criteria and haggle, save, or trade to get the right equipment for the job. Do not compromise!

    If you follow these three tips you will end up a happy camper with just the right unit for the job. If you disregard this advice your gonna end up with One or the other of the following problems:

    A. Buyers remorse. Stuck with a piece of junk or simply a unit inadequate for the task at hand.

    Or..

    B. A teed off spouse when you start shopping for another tractor just 3 - 6 months down the road because you didn't buy the right unit in the first place.

    Now go forth and shop and try and have fun!

  • 17 years ago

    a ZTR is a great for flat lots with lots of obstacles. but when you have few obstacles a regular rider can be just as fast. ZTRs save time in teh backing up/turning around obstacles, but not much in just straight cutting.

    even though CR rates craftsman well, keep in mind it is rated well in it's price range. if you are willing/able to spend 3k on a mower, i REALLY would recommend going to a dealer and getting a dealer line Deere/husq/simplicity/cub. if it is sold in a box store, look at a different model. you won't regret it 10 years from now.

  • 17 years ago

    "ZTRs save time in teh backing up/turning around obstacles, but not much in just straight cutting."

    Are you nuts? How many standard mowers cut at 8 to 10 MPH?

  • 17 years ago

    I'm now considering the JD z425. I just have to convince the wife that we need a mower that costs almost as much as I payed for her minivan.

  • 17 years ago

    The ZTR mowers in this price range don't travel (and definitely don't mow) at speeds of 8-10mph (The JDZ425 has a top "traveling" speed of 7mph).

    Are you planning on pulling any attachments with your new mower? If so you might want to make sure a ZTR is capable before going that way.

  • 17 years ago

    My old Ariens 16hp ZTR would always outrun my mothers 20hp Craftsman in straight line mowing. Its top speed was listed at only 6 mph. The OP said that they knew a ZT was more expensive. It depends on what your time is worth but it's not just time saved in turning around.

  • 17 years ago

    I've been told by commercial guys that even high end mowers don't mow well over 6 mph or so. Right now I'm considering the Z425 Deere and the Toro z4200. I'm keeping an eye on Craigslist for a higher end used mower in the meantime.

  • 17 years ago

    my X500 cuts at 7mph(out of his price range given). the new Craftsman Pro GT is capable of the same speed, and fits the price range. if you ever need to do more than just cut, you will want soemthign other than a ZTR. at least with a good tractor you can haul stuff, and with a GT you can do dirt work with the right attachments. the OP may never need that, most folsk don't. but it is better to buy when fully informed than to purchase a machine because tha tis what everyone else gets and then regret it later.

  • 17 years ago

    Your mowing speed will be determined by how rough your lawn is. I can mow at my Country Clipper's full 8mph on some parts of my lawn but it will beat me to death on other parts. It's all up to what you have.

Sponsored
Landscape Management Group
Average rating: 4.9 out of 5 stars33 Reviews
High Quality Landscaping Services in Columbus