Software
Houzz Logo Print
ywsteven

Troy Bilt and Tecumseh's reliability

20 years ago

Hi all

I am plannig to buy either a Troy Bilt form Lowes or the Toro's from Home Depot. I need a self-propel model with front wheel drive.

I researched the Consumer Report and they dont have reliability report on the TroyBilt lawn mower. Does anyone have any opinion on this brand compare to Toro.

On the Toro model in HD, it uses the Tecumseh engine instead of the B&S engine. A friend told me the Tecsumseh is inferior to the B&S. What do you guys think

Thanks in advance.

Steve

Comments (11)

  • 20 years ago

    I like either one. Not all engines are created equal. Look at the code numbers on the engine and research if it is a sleeved cylinder and other quality parts.

  • 20 years ago

    Hi Baymee

    So what is a sleeved cylinder? Is that good or bad?
    What are the other "quality parts" I should look for?

    Thanks

  • 20 years ago

    In a sleeved engine, an iron liner is used in the aluminum cylinder. The Tecumseh LV195 engine used this year on many mowers is not sleeved, but neither are the B&S engines. Sleeved engines are most often found on the very top of the line commercial mowers. In fact, having a cylinder liner makes an engine 'commercial-rated'. An engine without cylinder liner can last many years with proper care and use.

  • 20 years ago

    The Tec engine is just as good as the B&S. I have owned a Craftsman and a Toro with Tec engines with no problems.

  • 20 years ago

    Tecumseh has ALWAYS BUILT a very good rotary mower
    engine. The LV195EA on the Toro...is no exception.
    With good maintenance and fresh fuel, it'll give
    you as good as you'll get just about ANYWHERE !!

    T-Man

  • 19 years ago

    I can't speak for Tec's reliability but I can on Troy-bilt.
    The self propel feature is very weak, I would not pull the mower by itself. Not to mention that in less than a dozen uses, my rear wheel will not stay at the preferred cutting height adjustment. I have to use a bungee cord to keep it locked in place. Their service is practically non-existant and all I get are "form" answers telling me to take it to a third party repair shop. Don't get the Troy-bilt if I could sway you. And if you go online, you will see others saying the same thing.

  • 19 years ago

    My only negative opinion on the Tecumsehs have been carb related. As tekumcman says, maintenance and fresh fuel- you should do fine with either. I certainly see more Tec carb issues than Briggs. And yes, it usually goes back to funky old fuel left in the tank. They are just more finicky in my opinion. I recommend a Briggs or Honda. The Toro Super Recyclers tend to use Briggs.

  • 19 years ago

    Save your money and buy a mower from a real dealer with real dealer support, you will be glad you did in the long run. IMHO the best mower engines are Honda's.

  • 19 years ago

    Why must you get a FWD one? I'd recommend a RWD for the traction with a full bag. Full back won't help traction on a FWD unit.

  • 19 years ago

    Yeah, why would you 'need' a FWD mower? That's like saying you need a three-legged mule. FWD on a mower is pretty near useless. Going uphill, accelerating or bagging, the weight goes to the rear wheels. The FWD slips so much that the tires go bald. Check out any RWD and you won't find that, because the wheels don't spin/slip excessively. Manufacturers put FWD on mowers because it's cheap and they can claim 'self-propelled'.

  • 19 years ago

    FWD's also tend to be more prone to failure. It may be a chicken & egg thing. FWD's are found on the lower cost mowers, so are they built cheap because of that or are the mowers cheap because of FWD?

0