Software
Houzz Logo Print
bigvinnie

gopher proofing...???

17 years ago

I'm looking for opinions on methods to have a gopher-free lawn... I plan to install a lawn that is aproximately 70X30 feet...gophers are a constant problem in my area and I'm willing to go the extra mile to design a system that prevents intrusion as much as possible, if not totally...haha...

I have 2 ideas so far, feel free to shoot them down and offer something better....

1. Excavate the lawn area to a depth of approx. 2 feet and fill with aggregate, the lowest layer being larger rock, then increasing layers of smaller rock... final layer would be 1 inch gravel and maybe some sand... then a layer of topsoil, and finally seed or sod. So we go from coarse to fine rock, and then some dirt and grass.

2. Build an underground wall around the proposed lawn area... problem is knowing how deep it would need to be.

I guess option 3 would be to do both, which would prevent intrusion from underneath and laterally... like I said, I'm willing to do it right the first time, if that's even possible.

Hopefully, someone will educate me as to why this would be wasted effort, because you can't stop gophers no matter what you do.

Thanks for any help.

Comments (3)

  • PRO
    17 years ago

    Never had experience doing this, but I have read about a technique where 3/4" stainless (or galvanized) wire mesh is first unrolled over prepared soil, 2" of loam compacted over that, then the sod is unrolled in areas designated.

    Before shrubs, flower/vegetable beds, and trees are planted, as a protection barrier - wire curtains and/or baskets are installed around the perimeter of each at a predetermined depth.

    This process, although expensive, would appear to cost less than your 3 options.

  • 17 years ago

    thanks for the reply... I have a friend who used regular chicken wire before laying sod, and it worked well for about a year... then the chicken wire disintegrated and the gophers came right back.

    Hadn't considered stainless, I wonder how long it would last in this type of environment, where it's always moist..?? Did a google search and found stainless chicken wire, looks like it would cost about $3000 to cover a 70X30 space. I think I'd have to be sure that it would last at least 6-8 years before I'd go that route.

    thanks for the suggestion.

  • 17 years ago

    You could always try this method....I had a few moles until I unleashed this on 'em.

    It won't cost you nearly as much either.

    "CAR EXHAUST PIPE ADAPTORS
    You take your garden hose and stick it into the gopher or mole's entrance, then you attach the other end of the hose to a small adapter which then is attached to the exhaust pipe of your car. You let your car idle for 20-30 minutes and your pests slowly fall into a deep sleep from which they will never wake up.

    It sounds practical, but does this theory work? Well, it can work, but the fumes actually have to make it to where the varmint is. It's very possible that parts of the tunnel are closed off to where the gopher is and the fumes won't make it there. Plus, the further you push the hose into the hole, the more dirt starts to plug up the hose itself.

    Since the adapter is inexpensive, I would only recommend that you try it for critters that are living close to your driveway but not for the ones deep in your backyard. If you're gonna try this on the backyard gophers, you will certainly provide the neighbors with a Bill Murray CaddyShack moment as you have to drive your car onto your back lawn and leave it idling there for half an hour for each mound.

    If your garden hose gets plugged up with dirt, will it be hard on your engine? I don't know the answer to that, but I would worry about it."

    Here is a link that might be useful: Molecide