Software
Houzz Logo Print
tumblenes

Weekend with tumbler

19 years ago

A small journal of the most extraordinary of a week end in a Boston suburb.

Who would have thought that we would have 70F temps! Let me first introduce my tumbler:

{{gwi:261671}}

I have reached a small turning point. After unloading my latest compost Saturday I discovered that I had a wheel barrow left over! ThatÂs not quite true, but I have managed to produce compost for the past 3 months (on a 2 week schedule) and managed to spread it 3" to 6" deep on all my garden beds. I found this spot in the yard:

{{gwi:261672}}

MoreÂ

Comments (23)

  • 19 years ago

    My task this weekend was to move the bags of leaves that I had pile up against the back of the garage. Mostly cause I was a bit paranoid that these bags were holding water too close to the wood. I had 2 of those plastic 4Â diameter "bins"; tied them together and dumped the leaves. Also I figured that if I waited too much longer those bags would be difficult to handle (like the bottoms falling out):

    {{gwi:261673}}

    I estimated I had collected 200 bags this fall. That piece of plywood on the ground is my mower cutting station. Anyway, I will be composting differently from now on. The changes I will make are no more chopping and 1 month (or more) compost cycles.
    Attempting to be a little less manic about all this. And one of those plastic bins held a cold pile of leaves & coffee:

    {{gwi:261674}}

  • 19 years ago

    More about the tumbler. Only a couple of alterations were made. Added 2 ½ rods (suggested by others on this forum) and drilled holes of the thermometer:

    {{gwi:261675}}

    Compost was the usual, leaves and coffee. Nothing scientific here, just pile in the leaves and all the coffee I collect since starting the last batch, plus kitchen scrapes. Added 6 gals water.

    {{gwi:261676}}

    {{gwi:261677}}

  • 19 years ago

    Owning this tumbler certainly helped me to produce compost, much more than from the passive piles I produced before. Feeding the tumbler requires a bit of workÂ
    There are a few minor design issues with the ComposTumbler: Turning without the door in place seems to risk catching the hinges on the cross bar (which should have been 1" lower). There is no handle lock (I use rope) to prevent the drum for turning, this is needed when loading heavy barrels into the drum.

    These guys watch:

    {{gwi:261678}}

    There is an optional screen, but I have yet to put it to practical use, probably due to my impatience in "rushing" the loads and not shredding the leaves fine enough, but I can manage to get about 1 gallon before giving up. Set this aside for house plants.

    My next project, finish the beds around the new deck:

    {{gwi:261679}}

    {{gwi:261680}}

    It was good to do a little work outside...

  • 19 years ago

    "Only a couple of alterations were made. Added 2 ½ rods (suggested by others on this forum) and drilled holes of the thermometer"
    Tumblenes, would you explain about the 2 1/2 rods suggested? I'm thinking of buying a tumbler like that and would appreciate ideas for improvement.

  • 19 years ago

    brdldystlu posted pictures in the link below:

    the picture is a "twin", I have a single.

    I located mine just above the top of the door, dividing the drum in 3rds. I though this location would interfere less with pitch forking. Anyway it is said that these rods will help break up/mix material. What I think helps is turning as you add small loads as, opposed to waiting until it is full. I installed these with the hopes of turning less.

    Two things help me decide turning. The last batch, did it have "pockets of undecomposed material? Then turn more often this time. Secondly I use temperature when to turn. Turn during the first week when over 155F and when under 120F.
    If you are into producing/promoting fungi for your perennials then turn much less.

    Here is a link that might be useful: link below

  • 19 years ago

    there are 2 rods, 1/2" all-thread.

  • 19 years ago

    Great job there. But if you have read the thread about the mystery compost thermometer you will find that I do nothing but turn garbage into my gardens. So if that is the case I guess we all do.
    I did just that yesterday, one side of my tumbler was black fine crumble, no longer would heat, didn't have anything in it that you could say oh that was a leaf. But it is garbage by one member on here.
    Sandy

  • 19 years ago

    Sandy, of course I read that thread and most threads that you post to...I guess "garbage" is open to all sorts of interpretations; I take it that you employ both the "lasagna" & aged tumbler compost methods. A balanced approachÂ

  • 19 years ago

    LOL I employ adding anything I can get my hands on to my soil. The main reason for me to use the tumbler is we have lots of wildlife here. I don't want to encourage them anymore than they already are. So using the tumbler to make compost with keeps the critters out of it. Oh and my dogs, Got to love those little girls but they would eat anything I throw out that is food waste.
    I love doing the lasagna on the beds because for the most part I can do up a whole bed in the fall in a day or two, if I have the materials ready. Then by spring it is pretty much on its way to being compost.
    I can see how putting the materials out for lasagna could be read as garbage but that doesn't ever mean it doesn't do the soil good. Worms stampeed to the spot, eat, poop, airate the soil and leave behind a very rich soil.
    But what is coming out of a tumbler, pile that has been mixed, gone through a heat cycle or two, is nothing but compost great for the soil.
    I am having issues with my tumbler's right side staying to wet. I dumped the left side a couple days ago, spread it out on a flower bed over some leaves. I hope the weather is ok enough for me to get out there today and dump the right side a bit, will put part of that in the left side with new leaves and add more leaves-oh wait forgot about the trash cans full of paper that went through the cross cut shredder. Hum maybe that will go out.
    Mix it all and sit back and watch the steam.

  • 19 years ago

    Sandy,
    If the right side of the tumbler is too wet, then I would check the vent screens, clean them if necessary, may be drill some more small drainage holes. I assume that the tumbler divider is not water proof at the seam, could be out of level. Over watering is something I try to avoid, so I make a mental note how much I added for the previous load.

    Anyway your methods seem sensible to me. The wife has banned me from the paper shedder, seems that I made it sound funny after I attacked a 6' pile of news papers in one sitting. I was looking for one of those "micro" shedders to go on sale!

    Looks like your weather might be freezing rain, still going to work outside? I am hoping for 50F! Weird weather here.

  • 19 years ago

    Sigh by the time I got off work it was raining lightly. I bought some bags of top soil for weight in the back of sons little ford ranger. Went to the craft store for more yarn to start another afghan after I finish the one I am working on. When I came out of there it was raining a bit harder. I stopped at the Starbucks near craft store and picked up a bag of grounds. Came out and still raining a nice rain. Stopped at a second starbucks and it was still raining nice. Came home and other than taking out the things from the craft store and the grounds I left the top soil for son to deal with. Was raining harder than I liked being out in, and the temps were dropping. It was warmer when I went into work at 4 this morning than it is now. Now the rain is starting to pick up more. Did I go out to the tumbler, no way. Trying to get a dog to understand that she really needed to go out and go potty, LOL pampered pooch. Looks like another night of me holding the umbrella out front so the dogs can go potty.
    Oh the freezing part has not happened yet, but the temp is down to 33, was in the 50's when I left for work. LOL
    Sandy-who wants summer not winter

  • 19 years ago

    may your compost be slow & easy as well as your driving (in light of MO's pending storm)

  • 19 years ago

    Thanks tumblenes, I don't plan on going anywhere till Monday when I have to go back to work. Both my kids have weekend jobs, I am stressed for them. Oh I am such a mom. LOL
    I am sure this will put an end to the tumbler being turned for a bit, till we get another warming trend. But that is ok will work on planting seeds, playing in the greenhouse.
    Sandy

  • 19 years ago

    Sigh, we lost power over night between Friday night/Saturday morning. I woke up to the emergancy flash light flashing, first thought was oh no my greenhouse. Jumped out of bed, dressed warm, coat, boots and ran out to bring in the plants. The only thing I left out there was two pans that lettuce/raddish/beats and spinach are growing in. The only bad thing is I have some tomato plants in one of those plants that just got their first leaves. Those pans are to big to bring in. They are on the floor and I threw a nice layer of leaves over the one with the tomato plants. Not sure if they will be ok or not but going to try to get out there today and check on them.
    We got our power back around 11pm Saturday. But I had already unplugged the heater in the greenhouse because of the leaves, sure didn't want them to catch fire.
    Just looked up the street, a neighbor lost a bradford pear, it is gone. I hope it didn't hurt her house. Single mom. Guess some chainsaws will be buzzing today.
    The plus has been at this point with two storms the roads are still ok. I am sure over pass's are a mess. My deck is an ice rink, no way am I going to try and walk down the steps. Dogs will go out front for potty breaks. The trees are very pretty, I love the plants with ice, however don't like ice skating.
    I did walk out to the garden/tumbler yesterday. It has a nice thick layer of ice on it, I can imagin how thick today as we got another round last night. One more round comes through tonight.
    I have a rose of sharron that is trained into a tree, it was curled over yesterday to the ground. Sigh. I see tops of the treens in our wooded area that seem to be missing. I guess I will be making tons of mulch next spring/thaw. Ugg.
    I hope everyone that is effected by this storm are ok.
    Sandy

  • 19 years ago

    sandy,
    New England has requested that you send the freezing rain to us, we should get it soon, thanks.
    still nice mild temps this weekend, but too wet.
    Hope all is well...
    Glad you have a rose of sharron, one of my favorites, next to lilacs. what was the flower around the mail box? very nice!
    take care,
    nes

  • 19 years ago

    update,
    I had noticed one thing about my tumbler. The normal "resting" position is the access door faces downward, although the tumbler was turned often, water eventually settled to that low point & after about 1.5 weeks a layer of frozen material blocked access- the rest of the pile was unfrozen & tumbled easily. I am thinking now I should vary the resting positions. It wasnÂt difficult to start the compost, but the timing did vary from warm weather loads. It took 2 days to reach 140 °F and remained there for less than a week, then settled down to 80 °F for a week, the third week was about 50 °F. These were cooler temps and slower to heat and quicker to cool. A definite battle with winter. To be fair I should mention that I didnÂt chop the leaves with the mower (I couldnÂt get it started!), they went in whole. I did overfill the tumbler which I believe interferes with the tumbling action, and possibly more importantly, water distribution. And lastly, possibly 6 gallons water in the beginning was too much. I think I will start the next pile with one gallon water per day until it gets to temp.

  • 19 years ago

    tumblenes, I always leave my tumbler with the doors facing up. Today when I tried to get into it I had to beat it with my fist as the steam formed an ice seal and made it hard to open. Wonder what tomorrow will hold.
    Sandy

  • 19 years ago


    My compostumbler uses the door vents as drainage. I figured that it was best to drain the excess water. It didnÂt occur to me that upside down might work better.

  • 19 years ago

    I have the twin tumbler so it can drain inbetween the two sides as well it drains to the right side, not level. I don't know if having the door to the top it will work better, but it still works. My directions also gave the instructions of having the door on the bottom, but this time of the year it makes it hard to put stuff in the building side if stuff is frozen to the door. You might want to try to leave it with door up for a couple days and see if the stuff thaws so you can get inside it. If you are like me you like to check on it once in a while. And I am sure you have found out quickly that in the winter you really have to limit the amount of moisture, will freeze things up quickly.
    Sandy

  • 19 years ago

    I did bust through the frozen material at the door a week ago, just to see inside, but I'm not bothering anymore as the ground is a sheet of ice making it difficult managing a wheel barrow, so I wont empty the tumbler until the ice leaves.

  • 19 years ago

    Hey, maybe I should try reading instructions. I didn't see anything about having the doors at the bottom of my twin tumbler, but I can see where it might be a good idea. I tend to leave mine near the top, front and it does seem to get a bit more moist than I expected. A lot of rain this winter, in Georgia. Anywho, I think I'll try putting the doors down for a while to see if it does anything differently. Coolage!

  • 19 years ago

    I always leave mine dead top and this way it doesn't get as wet. If I leave it to the front then the rain gets in. NOt sure why but dead top or dead bottom the rain seems to run right off. This time of the year you really do not want all of that extra moisture.
    Sandy

  • 19 years ago

    rain could come in through the door seams, they arent weather tight. If you wanted more drainage then I dont see why not drill a few holes in the drum. Or you could order the door "aerater" parts, but that would be more of a pain to cut the correct sized hole(s), but might work better. I can see keeping the door accessable to add material, but I fill mine all at once.