Hi All,My trusted snowblower will not move in any grear forward or reverse. I have looked at the belts and they anr not slipping. I adjusted the pull cable all the way to the bottome the bottom (tight) with no luck. I have moved the snowblower into the service position and removed the skid plate and the friction wheel and plate look good. The Wheels will move by hand smooth and easy. I assume the friction plate is supposed to move upwards when I pull the wheel clutch but it only squeezes the spring on the shaft that is connected to the clutch. Is the plate supposed to lift? I also looked at the shaft in the rear that looks to pivot and that is loose and will turn freely. Is there anything im missing. I have been working on this on and off for the last few weekends��and im conceared that mother nature will catch up before I can fix it. Any suggestions or advise would be greatly appriciated..The model number is 932104...Sean