Software
Houzz Logo Print
mtheaded_gw

Snowblower Throttle Sticks Open

15 years ago

I recently acquired a used MTD snow blower that wouldn't start and I had to rebuild the carburetor (which went very well thanks to some step by step online videos on youtube!). Got it put back together yesterday and it fired right up and runs smooth, but I have an issue with the throttle. While I can push the throttle forward to increase the rpms when I back the throttle down the rpms do not decrease. I have to grab the linkage and move it backwards to decrease the throttle (it stays 'stuck' in the open position). There are no obstructions in the way, the linkage is clean and lubed and I put the linkage back exactly as it was before I started (I took lots of pics before beginning the process)I don't know if this was an issue before I rebuilt the carb or not since it didn't run but I doubt it.

Any ideas on why this is happening or how to resolve it? If I can get past this I think I have a very nice snowblower. I can run it now, but once I put the carb cover back on, backing off the throttle by hand will be difficult at the least. I'm happy to post pics if it would help.

Thanks!

Comments (5)

Sponsored