Software
Houzz Logo Print
moeb100

pressure washers

21 years ago

I had a husky 1600 for about 4 mos , it started leaking real bad from unit and hose connection and wand , I took it back to Home Depot, they gave me a 1750 unit , a new replacement model , I have had nothing but problems the wand leaking I replaced the o ring worked fine for 2 hrs , called the 800 # they will send me wand ,called march 26 , still waiting(april 25) called april 22 , water leaking they will send me a manifold gasket , yea when , all i use my unit for is to pressure wash my pool screen enclosure twice a yr taking my time over 3 days ..UNIT THAT I HAVE IS PIECE OF JUNK AND THEY WILL NOT REPLACE , 1 YR WARR IS UP SOON AND I WILL BE UP THE CREAK ...WILL NOT BY ANOTHER UNIT BY HUSKY OR FROM HOME DEPOT

Comments (12)

  • 21 years ago

    I will not go to any of the Home Depots here for anything. About as useless as tits on a boar hog.

    Pressure washers. You get what you pay for. When looking at them. Look for a CAT pump and a good engine. In my book people are just wasting their time looking at anything below 2400 PSI and 3 GPM.

  • 21 years ago

    I picked up a Coleman electric pressure washer, out of the garbage. It works good, but the wand leaks a lot! I don't know where to find seals for it! Anybody that can help-please do!
    Thanks: Rustyj

  • 21 years ago

    I bought a gas powered pressure washer from Northern last year, following the advice from this board, I made sure the washer came with a CAT pump and a Honda engine. Out of the box, I had horrible problems with the wand leaking. I took the gun assembly apart, found where the wand screwed into a threaded fitting, unscrewed it, put on some teflon tape and screwed the wand back in (just a little tighter than before) and it works fine. Doesn't leak a drop. It does make you wonder why the assemblers tighten the wand properly--or use .10 worth of teflon tape.

  • 21 years ago

    I know you don't like Home Depot but in their ad in this morning's paper, they had a Ryobi pressure washer (don't remember the specs...it's not on the website) that had a three-year engine and pump warranty. There's most likely some fine print in the warranty but may be worth looking into.

    LL

  • 21 years ago

    That Ryobi PW has a Robin Subaru OHV 7hp engine. Should last a long time, they are ruggedly built.

  • 21 years ago

    I bought that Ryobi power washer (3000 psi/2.7GPM) from Home Depot 2 weeks ago for $400. It was an open box special and it works fantastic! I have stripped paint off of foundations and cleaned a wood deck in less time that I thought possible. The Robin/Subaru 7 hp engine is excellent and should last forever. The Ryobi unit is nice because you can put 2 gallon bottles of degreaser or deck cleaner in the bucket and transport it at the same time. The biger units with the Honda GX motors are twice the price. I am happy with this product and would recommend it to those looking for a medium duty power washer that is light and portable.

  • 21 years ago

    Rusty, you might try these folks.

    Here is a link that might be useful: pressure washer supply

  • 20 years ago

    Spacemule..........

    I want to thank you for posting the link to Pressure Washer Supply. I have a Craftsman washer which has done yeoman duty for me for years. The pump finally gave up the ghost from corrosion. It was my own fault for not thoroughly flushing soap out of the system.

    It was so corroded I couldn't disassemble it. Kind of like an old outboard motor that's been used in salt water and put away for the winter.

    Frank at PWS helped me out with suggestions on how to remove the old pump and then selected a new pump to fit. I'll end up spending under $150 instead of laying out $400 for a new unit. I owe you a cold one! :)

    Rich

  • 20 years ago

    Count me on the Ryobu bandwagon! I bought one this Summer and have been very pleased. As I've said before, the Robin/Subaru engine will be worthy enough to replace the pump, rather than the whoile unit, when the pump fails (and that's a given!!)

  • 19 years ago

    i went to home depot. they head one of those weekend sales i wasn't looking for anything but i spotted a pressure washer i knew i need one but it wasn't time yeah but when i ask the sales guy how much was it he said half price o lil be under half price (damage package box )
    $200 is was a RYOBI 3000 PSI 2.7 GPM with a SUBARU engine to make the story short i love it works fantastic. don't have to pay a fortune and i have a nice pressure washer.

  • 8 years ago

    Ed , Thought you were talking Karcher a few weeks back ?

  • 8 years ago

    What is the best pressure for under $200 was the title , See you have removed your post on that thread and started this version ?