TECUMSEH CARB PART# 632213 is only $80 since I know ya priced... Google it. Try your local friendly Tecumseh dealer for a kit or a carb if you like. Just about any Jones on the street can get you one, shouldn't be to hard.

I too need a; new carb. The current one was broken during a recent move. I have found the carb on the net but would like to verify that the number in the previous post is correct before I make a purchase decision. Tiller SN 667802, engine tecumseh HH60 10511EH, SER 50550. I found the following number on the carb body, 8083420.

TIA

Larry

Unless the old carb is damaged by water-caused corrosion (or physically broken), I have NEVER had one that couldn't be rebuilt.

The rebuilding part is the problem. You'll need some tools and the proper cleaner and some experience.

Mine was physically broken and had water-caused corrosion. New ones are not to be found at online stores. I did find a used one at a shop. All ready to go as soon as I get any residual water out of the fuel tank and a new fuel hose.

i have an 8 hp model and the carburetor is leaking out gas period towards the back from right under the little lip at the top. What does this mean.

I'm guessing your float needle is leaking or something is wrong w/ the loat and causing the carb to overflow.
Mike

http://www.ioffer.com/i/tecumseh-carburetor-carb-632230-fits-h30-h50-hh60-208821330 This link to newer number for carb.

Here is a link that might be useful: carb. parts