I have just successfully completed the installation of a drive/worm gear kit. The info in your forum helped with some minor problems,thanks. On retesting the safety items and adjusting the up and down force the manual suggested that I run the door through 3 or 4 cycles. I did this and the door stopped operating in mid cycle on the 4th run through. A green led on the back panel of the unit flashes 5 times with a 3 second pause. After about 30 minutes the unit recommenced working but the 5 flash signal continues. I have not run the door except to open and close once since then. What does the 5 flash signal mean and do I have a serious problem? Any help will be appreciated.
bill_kapaun
johncan30Original Author
Related Professionals
Gaithersburg Landscape Architects & Landscape Designers · Vicksburg Landscape Architects & Landscape Designers · Beaumont Landscape Architects & Landscape Designers · Sugar Land Landscape Architects & Landscape Designers · Lebanon Landscape Architects & Landscape Designers · Albuquerque Landscape Architects & Landscape Designers · Richmond Landscape Contractors · Burlington Landscape Contractors · Riverside Landscape Contractors · Fayetteville Tile and Stone Contractors · Gainesville Tile and Stone Contractors · Tupelo Tile and Stone Contractors · Chambersburg Tile and Stone Contractors · Grand Island Tile and Stone Contractors · Vancouver Tile and Stone Contractorsflatfoot129