Software
Houzz Logo Print
vamptoo

HFGH #2 on order!!!!

21 years ago

I am so excited. My second HFGH is on order. Should have it in a couple of weeks which is fine because I have lots of prep work to do. I'm a small woman so it will take me a while. DH has agreed to put this one together, he did the first one, if I do the prep. Considering the nightmare it is of putting these together I'm getting the best part of the deal. LOL

We are going to put it back to back with the first one, taking out what would then be the middle. I want doors on both ends to help with creating a breeze to keep it cooler. I already have a solar pool cover (thanks to Cactusfreaks suggestion) and I bought it big enough for two in anticipation.

This one won't need shelves because it's purpose is for the big pots that need to be wintered over.

Ok, I'm rambling but I'm excited and had to share with folks who would understand!!!

Cindy

Comments (12)

  • 21 years ago

    WOW! I was thinking of doing the same thing but not sure how to go about it. I have really enjoyed the HFGH we have but it fills up so fast. I hope you will post pics when your addition is complete.

    *;*

  • 21 years ago

    Snow,

    This spring was crazy in my greenhouse. You couldn't get a 1 inch plant in it by the time planting time got here. I had a flowering maple that lived under a tall bench all winter. Bless it's heart, it even bloomed under there.

    I will definitely be posting pics of the whole operation. I'm really looking forward to it actually.

    Maybe we need to start a HFGH club. There are clubs for everything else these days. LOL

    Cindy

  • 21 years ago

    Hello all;

    That's an awesome idea Vamptoo. Wish I'd thought of it. I also bolted two together but I'm saving the extra door as a screen door to use during the summer.

    hello snow;

    There's two ways to add on. You could just build two frames and bolt them together. I built the first frame and then built the second frame directly on the first one leaving off the end on the second one. The 2 gutter pieces have to be trimmed slightly butt up against one another. And the end pieces of the first one have to be drilled to bolt the new frame to the old....GEEZ this sounds complicated, but it's really not.

    Hope this helps
    Dave

  • 21 years ago

    Dave,

    That's why I jumped when the DH offered to put it together if I did the prep. He's an Engineer and can figure these kinds of things out whereas I wouldn't really have a clue. Putting together the first one was really a scream. At one point we were both sitting on the flooring laughing like maniacs at the directions for the door. Or should I say the lack of directions for the door.

    I'm wondering how I could have a bar on one side, the length of one of the GH's that would bear the weight of about 8 hanging pots. Any suggestion??

    Cindy

  • 21 years ago

    Sure...There's no reason to hang the bar....try building 2x4 extensions from your benches in the appropriate location and run the bar....electrical conduit comes to mind...over the ends or through a hole drilled through the 2x4's

    You're right... building it was a real @#$%^!...LOL
    but I did it myself...WOOHOO...guess we can do anything if we try...:)

    Dave

  • 21 years ago

    Dave,

    My DH asked if you have pics of how you put yours together. I thought you had done some but I can't find them on here. It seems a lot of archive stuff has disappeared from the Garden Web.

    If you have any pics would you share them.

    That's a good idea about posts for the bar. Thanks

    Cindy

  • 21 years ago

    Hi Vamptoo;

    Sorry but no pics. But not to worry, it sounds more difficult than it is. Basically you're just leaving off one wall (in your case the back wall) of one of the houses.

    The only trimming involved should be the gutter pieces (#39 I think) as there's too much of an overhang and the two halves won't fit together right. Also remove some supports from the center section of the back wall for access so you can walk through. I wuld leave the side sections of the back wall for extra support. Otherwise the rest is just cut and fit as he see's necessary.

    Really you're just building a second one on the first. As I said it sounds MUCH more complicated than it is...the first one was the hardest to put up.but the add-on was MUCH easier.

    Best of luck,
    Dave

  • 21 years ago

    I had saved this picture of Rob's of NJ.
    Hope he doesn't mind me posting it.
    Maybe you could do a search and find his email and ask him some questions.

    Double Harbor Freight
    {{gwi:296577}}

  • 21 years ago

    Thanks for the pic. Now that you mention it, he sent me some stuff on this before. I wonder if it was before my laptop crashed. I think I will email him again and beg for forgiveness and see if he will send it again.

    I just found out that it has been back ordered to Aug 16th. I'm rather disappointed but I guess it gives me more time for some prep work. DH is working up his 'bribe' list for assistance. Hee hee

    Cindy

  • 21 years ago

    Ask (for pictures) and ye shall receive.

    I put together a website for my HFGH, including assembly pics and 'extras'. Go to the link below to check it out

    Here is a link that might be useful: HFGH assembly website & extras too

  • 21 years ago

    Thanks for the link Marbs. It will help the DH a lot.

    BTW, your web site is great.

    Cindy

  • 21 years ago

    Bumping to top.

    Great info. Anyone else have new photos or tips on joining two back to back with doors on each end?

    Marbs, your construction photos are very helpful.