Software
Houzz Logo Print
toys2win

Compare LT 166 and X304

19 years ago

JD LT166 vs X304. I'm getting ready to upgrade my mower. I currently have the LT166 which had been a fantastic mower. I've used it with the 42" Freedom deck for 7 years and also pushed snow every winter with the 42" blade.

I need a new toy with better back support and heavier frame.

Can someone tell me if the X304 is a much better tractor than my LT166? I know it is 4 wheel steer compared to my not, but is the tractor any heavier duty than my LT, or is is basically just a newer "residential" mower, with 4 wheel steer gimmick?

My yard is about 1 acre with a bit of everything including trees, hills, and a treeline ditch that always makes my LT166 groan and creak when I get it in a bind.

Thanks.

Comments (6)

  • 19 years ago

    Hope some of this helps. I am sure you know the x304 gives a slightly better tranny with a pre-charge than the x300. ONe post I read a guy had hilly terrain. The x300 would not quite work on his hill. The x304 with the pre-charge did the trick for him. OThers have the said the 4 wheel steer gives them better traction too. If you read the forums people really love that kawasaki motor.

    ***********************************************************
    JD X300 ($2899) vs. Sears GT6500 ($2,550)
    (although neither one of these is a box store offering)
    ***********************************************************
    Both:
    Foot pedal hydro
    Twin cyl. pressure lub. eng.
    Deck gauge wheels
    1-4" cutting height adjustment
    Electric PTO
    JD advantage:
    Fully assembled vs. partial assembly req.
    17 hp Kawasaki vs. 26 hp Kohler Pro
    Safety video and RIO vs. ?
    12 ga. vs. 10 ga. deck
    42" vs. 54" deck width
    13 height adjustments vs. 7
    K46 light duty LT hydro vs. ground engaging rated hydro
    3/4" axle/keyway wheel retention vs. GT std. 5-bolt hubs
    3.5 gal fuel tank vs. 4 gal fuel tank
    "welded heavy-duty" frame vs. 11 ga. "formed" frame
    15x6-6 front wheels vs. 16x6-6
    20x10-8 rear wheels vs. 23x10-6
    16" turning radius vs. 18"
    purdy green/yellow paint vs. black/gray
    Potential for "test drive" vs. no way
    Conclusion: at about the same price point JD gives you a smaller, weaker engine; smaller, weaker hydro; smaller wheels; smaller, thinner deck; less fuel capacity; and no ground engaging capability. You will get a tighter turning radius, a JD cap, a more prestigious marque, possibility of a test drive, better resale value

  • 19 years ago

    Why do you need a heavier frame? Have you bent or broken the one on the LT166?

    I'll bet you could buy a more comfortable seat for a whole lot less than you'll lose selling your LT166 and buying something new.

  • 19 years ago

    It's basically the same, but a heavier frame and 4WS. If you just want a new machine, then you're on the right path... If you want more capability, you're probably too close to call.

  • 19 years ago

    Interesting. I assumed that in the 7-8 years since my LT was born, there had been some improvements along the line.
    While mowing my ditch with my LT 166, sometimes my frame creaks severly and my mower deck has about ground two bolts on the bottom of the frame down to nubs. When my deck lifts up under the machine, my pulleys rub.
    I'm hopeing a slightly bigger machine (x304) will be a bit larger "tractor" to get around some.
    I'm assuming my LT166 was somewhat of an entry level garden mower, and I'm wanting to move up to lawn tractor. Am I wrong that the x304 is bigger and better?
    Thanks!

  • 19 years ago

    I've got LT155 and looked closely at the x3 series while waiting to pick up parts recently (ignition switch etc)- I really don't see any real upgrade in machine/frame going from the LT155/66 to the x3 series.

  • 19 years ago

    Good point. If you want a really sturdy tractor for $2500 the DGS6500 is tough to beat.
    The X304 is a "boutique" tractor, probably more maneuverable but at the end of the day not the brute the 6500 is. if you are looking for heft of deck and frame I would go 6500.

Sponsored