Software
Houzz Logo Print
newgene_gw

New Owner Having Drive Problems w/Craftsman

19 years ago

I just bought my first lawn tractor, a 2000 Craftsman, from Craigslist last night. It seems to be in great shape; 42" deck , 19.5 HP B&S. I don't know hardly anything about these things so I could use some advice.

I drove it around for a while, gave the kids a ride in the cul-de-sac, etc, and all seemed fine. Then I parked it on a hill to get off and open the backyard gate. When I got back on I tried to back it up the hill a little, but it wouldn't go. It kind of jumped a little a few times like it was trying to go, but never would gain ground up the hill. The engine continued to run normally (didn't bog down or die). I didn't want to burn something up, so I just continued down the hill and parked it for the night.

I think this may be the drive belt slipping from being stretched over the years, but I have no clue on these things and and don't want to take the deck off and replace it if that's not the likely candidate. Is there an easy way to confirm this?

Any advice for a newbie? Thank you!

Comments (13)

  • 19 years ago

    Is it possible that the tire was spinning, but you didn't notice?

  • 19 years ago

    Good question... I'm sure the tires were not spinning, I checked that first.

  • 19 years ago

    I have a Craftsman as well and it is prone to tire slippage on the hills. I will just shift ny weight to the side that is slipping. Being a 230 pounder does have it's advantages sometimes.

  • 19 years ago

    You may have discovered the reason for the sale...

  • 19 years ago

    is it a hydro or manual tranny? On my manual craftsman the tires break loose and spin (with turf tires) I cant get the drive belt so slip so far.

  • 19 years ago

    you have not provided enough information. here is one possibility:

    Someone may have removed one of the rear wheels. There is a square key that locks the axle to the wheel. If the wheel was reinstalled without the key, the axle may be spinning inside the wheel hub.

  • 19 years ago

    Could the brake have been stuck?

  • 19 years ago

    Try pulling the clutch pedal up with your foot. My dad has one and it sticks sometimes and won't go. It is not really noticable by looking, but if you pull back on the pedal, it will come unstick and go just fine. Also, watch out. That craftsman, if like my dads, has a most unusual "feature". The clutch/brake pedal doesn't return the hydro to neutral like all the other hydro mowers I had seen. If you let off the brake without returning to neutral by hand it could give you whiplash or worse.

  • 19 years ago

    "I don't know hardly anything about these things so I could use some advice"???.

    Do you have owners manual?
    Do you know if it's manual or Hydraulic?
    Do you have any mechanic skills?
    Can you find the data plate and list the information off it? (usually under the seat, a big long number usually beganing with 917XXXXXXXXXXXX)

    Advice?? start reading up on the type and function of your LT. To have any chance of making repairs you will have to have a working knowledge and a IPB of parts. also a general knowledge of pre-ventive maintenance to keep the LT in running condition.

    If you lucky and got the manual dirve tranny it could be the drive belt which is up under the deck. the deck will have to be removed and routing of the belt observed before taking it off. usually there is routing instructions under the foot rests depending on the model. this is why we have to have basic information of the type of LT beings sears makes several models of the LT2000

  • 19 years ago

    Hey, thanks for the comments so far. I monkeyed with the brake/clutch several times to no avail.

    It's a manual Tranny, 6 speed.

    Model number is 917.270911

    I don't consider myself a complete maroon when it comes to mechanical challenges and general engineering type questions, I am pretty handy. I've just never had to work on a tractor before. Looking forward to learning a lot more about all of this as I go though. I really do think I have a solid LT to work with, just need to get it all gussied up for my first season.

  • 19 years ago

    did you check to see if somebody getting on or off the tractor accidently hit the high/low selector lever and isn't properly engaged? if it isn't engaged properly it will act like its in neutral.

  • 19 years ago

    if it were me I would have to check this off my list for sure.

    "There is a square key that locks the axle to the wheel. If the wheel was reinstalled without the key, the axle may be spinning inside the wheel hub."

  • 19 years ago

    My tractor was used too and I have reffered to the sears site many times. It is http://www3.sears.com/ I put in your 917. no and they have a diagram and list of parts. Very helpfull. You can order online, but you may be able to find the part locally. Like belts, bulbs and hardware.
    I posted the link below too but you may have to copy and paste it.
    Good luck

    Here is a link that might be useful: sears parts

Sponsored