Sorry to be a smart a$$ but I can't resis - ... a New saw?

That saw has an ignition module. The module and coil are one piece. It's kinda like a CDI. There are no points or condenser. You should be able to find a new or used module on the web.

Thanks dewaynep. I kind of thought everything was in that one piece, but didn't know what it is called. I already found some on the web. Thanks again.

My neighbor recently gave me a red Home Super XL 12. Its a super XL 12 Auto. The UT number is 10045A SN is 503530013. Homelite Textron.
It appears the saw hasn't been used a lot. Great compression. The gas line definitely needs to be replaced. One side of the clutch is broken and sticking out when i took off the sprocket cover. I'm betting someone broke it when they were trying to pop off the clutch. I can put the cover back on. Not sure if this will work when I do get the saw running. Comments needed on this problem.
My priority question is I can't get any spark on the saw. HOw can i check to see if the coil is any good?? I'm assuming this saw has no points.
Would appreciate any help or advice.
Glen

I have a Homelite XL12 Lot#D5064 Serial #44535178. Saw runs but loads up with gas. Changed carbureauter and rebuilt but still having same problem. Could problem be reed valve Spark seems good and new plug.

Inlet needle valve is most common cause . Call Bill at previous thread note for further info , he is the forum expert on Homelites of all Vintage .