Software
Houzz Logo Print
doopstr

Function of foam precleaner, optional to install?

17 years ago

I changed the air filter on my Kohler Courage (Simplicity Regent) today for the first time. The package came with a paper filter and a foam precleaner. The dealer did not install a precleaner when they sold me the tractor, only the paper filter. The manual states it is an "optional precleaner". The manual states the precleaner should be lightly oiled before being installed.

So my questions are, why is it listed as optional? Since it's optional, under what conditions would I want or not want it installed? When the manual refers to oil, is this regular motor oil?

Comments (16)

  • 17 years ago

    The pre-cleaner is there to catch the larger stuff that gets sucked into the air box. If you use a pre-cleaner properly, it can save you having to buy new air filters more often.

    Yes, you can use motor oil. Soak the foam pre-cleaner thoroughly with some oil so that it is thoroughly saturated. Then squeeze out all the excess oil using just the force generated in your hand. Do not use a "wringing" action or you will wreck the pre-cleaner. The foam should be just slightly damp with oil. If you don't squeeze out all the excess oil, then the engine will pull that oil out of the foam and suck it into the paper filter. If that happens, then the paper filter will not pass air.

    Every 25 hours after, check the condition of the pre-cleaner. If it looks real dirty, then wash it carefully in a solvent such as Varsol. Then let it dry out. Re-oil it, squeeze out the excess and install it. As long as you keep cleaning the pre-filter on a regular basis, the paper filter probably won't need to be touched.

  • 17 years ago

    Water and dish detergent works very well for cleaning the pre filter, I prefer it over varsol. Oil it as kompressor suggests.

  • 17 years ago

    If it's dusty where you live and when you mow the pre-filter is a must.

    Interestingly, the Kohler manuals all show the pre-filter. It's only when you look in the tractor manual that it may be optional or more honestly, a cost consideration.

    Sears LTs and GTs have not come with pre-filters for years but they are obvious in pictures in the the Sears tractor manual.

    The Kohler pre-filters are reminiscent of the Filtron air filters (socks) used on dirt bikes of yore only much coarser. Properly oiled they catch coarser dirt and dust that would clog and dramatically shorten the service life of the pleated air filter.

    Years and years of filter cleaning have taught me to prefer water and dish soap for cleaning any foam filter element rather than any chemical including any patent "air filter cleaner". Make sure you let the pre-filter air dry thoroughly.

    One caveat is that with the EPA spec carbs we all enjoy(?) you may run rich at high altitude with the pre-filter installed. There are ways to correct that but it is worth a mention.

  • 17 years ago

    If you have any 2 stroke gas and oil mix ,you can use that to clean your pre filter.
    The gas will wash any dirt out and then after it evaporates it leaves a fine film of 2 stroke oil.
    If you over oil the pre filter you take the chance of oil migrating to the paper filter and any dust will stick.

  • 17 years ago

    Please accept a hard-learned observation (purely in the interest of marital harmony): If you use dishwashing detergent and water to clean the foam pre-filter DON'T DO IT IN THE KITCHEN SINK.

  • 17 years ago

    LOL You are definitely married. Clean it in a pail in the garage.

  • 17 years ago

    What's wrong with using the kitchen sink? That's where the soap is.

  • 17 years ago

    Because the pre filter is somewhat delicate - It generally goes in washer with my wife's dedicates.

    I suppose she will be furious when she actually finds out what that thing is...

  • 17 years ago

    "DON'T DO IT IN THE KITCHEN SINK." "What's wrong with using the kitchen sink? That's where the soap is." "It generally goes in washer with my wife's delicates."*******
    A warning to the unwise....after your with gets through swinging that cast iron skillet...your head is gonna look like a "tote sack" full of green walnuts.

  • 17 years ago

    Corrected post to replace the above post. (sometimes when I have to get up in the middle of a thought, I lose words or even paragraphs)
    **"DON'T DO IT IN THE KITCHEN SINK." "What's wrong with using the kitchen sink? That's where the soap is." "It generally goes in washer with my wife's delicates."*******
    A warning to the unwise....after your WIFE with gets through swinging that cast iron skillet...your head is gonna look like a "tote sack" full of green walnuts.**

  • 16 years ago

    Just today I saw a package with the Kohler 20-083-02 S air filter that had the prefilter. No where in my Craftsman Operator's Manual for the 917.28736 Lawn Tractor does it show the use of the prefilter for the Kohler SV610 type 0021 engine nor is it shown in the separate Repair Parts Manual. Sometimes it would be valuable to tell the customer when it should be used and what are Kohler's formal recommendations.

  • 16 years ago

    Can't really imagine anyone not using a prefilter all the time. They are cheap and very affective.

    Walt Conner

  • 16 years ago

    mownie, better check your correction.

  • 16 years ago

    Although the Sears manuals do not show the prefilter, the Kohler Courage SV470-620 Owner's Manual does show it. The repair manual, which repeats some information in the Owner's Manual, also shows the prefilter. The Sears stores I have visited have the filter without the prefilter, but Walmart has both in the same package at about one dollar more than the Sears price for the filter alone.

  • 16 years ago

    They do help in really dusty conditions. The best way to oil them is to put a few drops of oil in a ziplock back and squish the filter around in there. All you are going for is a very light coating on the filter. "Soaking" it and then wringing it out will likely result in a filter that has too much oil in it, causing the engine to run rich or oil to bleed into the paper filter and ruin it.

    The best oil for this is actually chainsaw bar oil as it is very tacky.

  • 16 years ago

    I agree 100% with Engine Tech , I utilized Winter Grade Bar Oil on numerous Dirt Bike Pre Filters with great results. The tacky is RIGHT lol ! Went through numerous sections of cat tail areas in my day and the fuzz did a job on coating the pre filter but saved the accordian style paper main filter . Now there are numerous Foam Filter Oil Treatments available , I think on another thread DW-40 has even been recommended to increase the dirt entrapment . Which will suffice .

Sponsored
Hope Restoration & General Contracting
Average rating: 4.7 out of 5 stars35 Reviews
Columbus Design-Build, Kitchen & Bath Remodeling, Historic Renovations