Hi mola,

Pictures really help. Here is what I would try. I would take a Reciprocating saw or hacksaw and cut through the valve. Next to the solenoid(after I removed it) and then through the body horizontally. High enough to miss the copper threads. Then I would remove the remainder with a wrench. Then I would install an adapter threaded/slip pvc fitting to go on the copper thread(teflon tape threads). Then prime and glue on a 90 degree elbow pvc fitting Slip/Slip. Do what ever you want with pvc to get away from the house. JMHO Aloha

Thanks! I will give it a go.

Hey Mola,

First take out the screws and guts of the valve before sawing. If you cut the horizontal pipe close enough maybe you don't have to saw horizontally. maybe. JMHO aloha