skip to main content

blade oreintation

16 years ago

I have a 2006 cub cadet lt 1045 with a 46" deck w/ 3 blades. blades were taken off to sharpen. now I cant remember how they go back on!! how does the belt spin??

Sort by:Oldest

Comments (3)

rcbe
16 years ago
from the LT1046 manual:

"IMPORTANT: When replacing the blade, be sure to
install the blade with the side of the blade marked
ÂÂBottomÂÂ (or with a part number stamped in it) facing
the ground when the mower is in the operating position."

see Pp 26 of manual, Fig 21 .....

Here is a link that might be useful: LT 1046 manual
tomplum
16 years ago
The blades spin CCW when viewed from the bottom of the deck. Short blade in the center!
Related Professionals
Mobile Landscape Architects & Landscape Designers · Bartlesville Landscape Architects & Landscape Designers · Gary Landscape Architects & Landscape Designers · Eugene Landscape Architects & Landscape Designers · Ottawa Landscape Architects & Landscape Designers · South Bend Landscape Contractors · Escanaba Landscape Contractors · Marquette Landscape Contractors · Saginaw Landscape Contractors · Morgantown Architects & Building Designers · Burlington Architects & Building Designers · Brooklyn Architects & Building Designers · Stockton Architects & Building Designers · Temecula Architects & Building Designers · Eureka Architects & Building Designers
bushleague
16 years ago
The 'ground' or bevel always faces up, if no markings.

0

Sponsored