Software
Houzz Logo Print
hzdeleted_19753986

Ventrac - opinions...

19 years ago

Just wondering, since Ventrac lawn equipment is manufactured in nearby Orrville, Ohio, how are they regarded in the world of lawn equipment?

Comments (12)

  • 19 years ago

    They are "different" looking.

    I tried a Simplicity once, with rear wheel steering. The first thing I did, was put the back end over the wall. Rear wheel steering takes some getting used to and may not be practical in all situations.

  • 19 years ago

    My 3000 was a great choice. It climbs our hills with no complaints. No grass damage from wheel scuff, regardless of how tight a turn I take. All wheel drive means I'll skip the tire chains during the winter. It swaps implements in a minute or so. This is important to me, since I use the scoop at least once a week. It has moved close to 8 yards of dirt & gravel for me, in only a few months time this year.

    John

  • 19 years ago

    The steering took only a minute or so to get used to. Its not rear wheel steering on the Ventrac, but articulated. A nice thing is the rear wheels follow almost exactly in the path of the front ones. You turn the steering wheel in the same way as any tractor or your car. The only difference is turning the steeing wheel causes a hydraulic cylinder to extend/contract to angle the front versus rear ends.

    Yes, the tractor does look strange. But it affords a great view of what you are doing at the time. And its great to be able to back up while mowing. Its also nice to be able to walk along side of the tractor while I move it around my garage, controlling it all by hand.

    John

  • 19 years ago

    Just in case someone gets the idea that "articulated vehicles" are a new concept. They are not. Articulation has been around for a long time in the construction equipment industry and there are even a few offerings of articulated agriculture tractors. There are urban transit busses that articulate. You could even call an old Gravely 2 wheel tractor pulling a "sulkey" an articulated vehicle. Time will tell if Ventrac can find a niche and a following.

  • 19 years ago

    No, articulation is not new at all. It is useful in a tractor however. It can also be found on several other tractors, most notably Steiner and Power-Trac. We almost went for a Power-Trac instead.

    John

    Here is a link that might be useful: Powertrac

  • 19 years ago

    Ventrac was started by the Steiner family. Story goes that after not liking how Jacobsen was running the show after they sold Steiner Turf to them, they created Ventrac. Hence the similarities and implement interchangeability.

    I demoed a Steiner about 10 years ago and it I could have made a better argument for its purchase to the CFO, I would never have let it leave the yard. The Ventrac should be at least everything the Steiner was.

    May only complaint/criticism for both machines: Could use a little more ground clearance.

  • 19 years ago

    My other post might have seemed that I was dismissing the "articulated concept" as being an old idea that did not work out. Actually I was trying to say that articulation has been proven many times over to be a viable configuration. It will depend on the "fickle factor" of consumers whether it will sell or not.

  • 19 years ago

    I didn't know about them uintil I went to a dealer to look at his Simpliciy machines and he was more interested in selling me a Ventrac. My two big issues with them are...
    1. cost-- the GT3000 model (smallest one) was $8800 without a mower ($1800 more) nor a plow ($905). The small one has a rather low profile tire that the dealer himself said was a bit too harsh a ride on "rough" surfaces. It also is much more limitted to the range of attachments. (available for the larger Ventrac machines)
    2. The mower is front mounted, like a ZTR. Not necassarily bad, but even with articulation, how maneuverable would it be on a hillside around schrubery, weaving in and out of my rhodedendrons, ornamentals etc.

    Just my thoughts for my conditions/usage.

  • 19 years ago

    I run a 4200 series for a major university in VA. Ventracs really are commercially oriented, but do have a lot to offer for a variety of applications. Our campus is comprised mostly of moderate to steep banks, and for a machine in this price range, the Ventrac meets our needs superbly. When equiped with the optional dual wheels, I can put beautiful stripes, in any direction I want, on banks up to around 35 - 40 degrees. Above that, and it's adviseable to either stick to a vertical approach, or avoid it altogether and use weedeaters. To be honest, a 60" zero-turn or walk-behind will get your flat mowing jobs done more quickly, due to their faster turn-arounds and tighter maneuverability, but a Ventrac can safely go places you would never even consider with the others. We would have a hard time keeping up with the campus without it.

  • 19 years ago

    I was just looking at the video of the Steiner ... they are pretty impressive!

    It seems like, through the whole video, all of the operators keep their hand on the hydro control ... it that required?

    I think, the local CC dealer may have an older one with a FEL. I'm going to check it out, just for the devilment of it.

    Here is a link that might be useful: Steiner vid.

  • 19 years ago

    1*I tried a Simplicity once, with rear wheel steering.
    tmajor
    2*And its great to be able to back up while mowing
    sawdust_maker
    3*
    *********************************
    1*Ventracs don't have rear wheel steer.
    2*What's so great about that? You can do the same with most or many tractors.

  • 19 years ago

    My OLD Bolens Lawn Keeper is articulated also.Has a rotory mower mounted on the front,but with only 5 HP,it is more of a toy,but does a great job.I suppose when it was first put on the market,it was better than pushing a mower.I haven't used it for several years.Bought it cause,it was unusual,and also a cheap Winter project.tbk

0
Sponsored