Software
Houzz Logo Print
hansenlarry

Everyone says using stone is a no-no for steam showers - am I wrong?

14 years ago
Presidio Heights Pueblo Revival - Steam Shower · More Info

Comments (11)

  • 14 years ago
    As long as you accout for the heat loss for the type of stone with a bigger steam generator, you will be fine. You should be able to go on websites like MrSteam, Steammist or Amerec and see the calculations needed when accounting for heat loss. Or talk to a showroom constulant at a plumbing supply company (like Ferguson Enterprises), they can help you with what size generator you wll need.
  • PRO
    14 years ago
    Consider Thermasol the leader in steam technology. Their steamers do not require any tricky math, just cubic feet. http://www.poshhaus.com/store/m/28-Thermasol.html
  • PRO
    14 years ago
    I am also available to size and discuss steam with anyone, nearly anytime either on this forum, or email me @ rob@poshhaus.com
  • 14 years ago
    Thank you - I appreciate your comments :-)
  • 13 years ago
    Just a note about the Vapor 238 on the bathroom wall - it is made by the company "C2", not Benjamin Moore
  • PRO
    13 years ago
    What is your exact concern? If you correctly water/vapor proofed the shower walls, ceiling and the floor before you installed the stone you will be fine.
  • PRO
    13 years ago
    I also see you have Mr. Steam unit, so make sure it sized properly.
  • 11 years ago

    I am redoing my steam shower and was wondering if I need to replace the vent/light fixture with the same? I have never used the ventilator, didn't make sense to pull out the steam, and it eventually quit working. My tile contractor thinks they are required and I don't agree.

  • PRO
    11 years ago

    Hi Jeff,

    The fan inside your steam shower is NOT recommended. It may create the "chimney" effect and your steam will not stay in the steam shower but instead it will escape through it. I would recommend a ceiling fan right outside the steam shower above your door/transom. You do want air flow to dry out your shower after you're done showering/steaming. Check out this link, click on "I'm the installer" and see what are the recommended steps to build steam shower correctly. www.thermasol.com/solutions

  • 11 years ago

    Thanks Martin. I have a fan outside the steam shower now and rarely need that. Most times a take a cold shower after the sauna and that condenses the steam down. And I always keep the shower door propped open to allow the shower to dry out after each use.