Software
Houzz Logo Print
jstall_gw

No mold, finally!

16 years ago

Thanks to Dan, I have roots on cuttings without growing mold. I washed the cuttings with Dan's method but I had them in sphagnum moss. You can notice the fine hairs from the moss. They cost me a root on one cutting. I was not careful when I took it out of the moss; it pulled the root off the cutting. I have my other cuttings in paper towels. Thanks Dan for sharing.



Comments (15)

  • 16 years ago

    Looking good J.A.

    The cutting on the top looks like a one node wonder as someone else calls it!

    Condgrads.

    Cecil

  • 16 years ago

    I have been using Spagnum moss(not Spag. peat)and using
    Dans cleaning instructions,no bottom heat,70-75 degrees
    and have had no mold problems.I get moss at LOWES,but
    Im sure other garden centers carry it.
    Good luck with your rooting!
    Tom

  • 16 years ago

    Did you used the Improved Baggie Method? You have a link to that one?

    I just cleaned up some cuttings last night, and put into baggies. scrubbed them really good with antibacterial soap. Ran out of bleach, so I need to go to the store to get some if I want to do a 10% solution.

    How badly with the bleach solution affect newly forming rootlets? Will it kill them?

  • 16 years ago

    I did use the baggie method but I just put the moss in loss on the bottom of the bag, laid the cuttings on the moss and covered them with more moss. I do not know if this is a good way to do it.
    J.A.

  • 16 years ago

    Jstal
    What was the ambient temperature and how long did it take to get those roots?

  • 16 years ago

    Ottawan, I put the cuttings in the bag with Spagnum moss on Nov. 19. I guess I was spelling Spagnum wrong.
    I placed them in the laundry room where the temperature was around 65 degrees. I searched for a warmer place in the house and found that above my computer it was staying a constant 70 degrees. I move the bag there on Dec 4.
    When I moved them to the computer room, they had white dots on them.
    J.A.

  • 16 years ago

    Jstall,

    I did get your email and will reply here for the benefit of others too......

    In the first picture you will see that the tip of the bud that sprouted on your cutting is dying. That's because water condensed on that growing tip while it was in your rooting baggie. When using just plain ole paper towels you can open them up and actually see when those water drops form on the buds. Removing this condensed water on those bud tips will keep this from happening. Unless you have another viable bud somewhere on that sprout or cutting.....it cannot survive.

    The purpose of a baggie in the baggie method is for the CONTROLLED re-hydration of a cutting in a minimal moisture and high oxygen content environment. One of its big advantages is the ability to actually see what is taking place on the cuttings and being able to take corrective action should a problem arise. Wrapping your cutting in moss makes it very difficult to see exactly what is happening. Personally, I see absolutely no advantage to using sphagnum moss in a baggie. Using it in a rooting cup is an entirely different matter.

    Dan
    From the swamps of South Louisiana.......

  • 16 years ago

    Speaking of mold,

    I am having some mold on some cuttings that I'm storing in the fridge crisper, I cleaned them as per Dan's instructions with the antibacterial dish soap and the with 10% Clorox solution.

    I hope someone can tell me what to do to stop this problem.
    Input welcome

    Thanks, Cecil

  • 16 years ago

    Thanks Dan, You are right, the sprout did die. Is that cutting dead now? The bag did condensate heavy but the moss seem not to be very wet. I went to paper towel now.

  • 16 years ago

    Yep, mold can occur even at refrigerator temperatures (34 to 38 deg F). Too much moisture condensed in your storage bags..... trying wrapping cuttings in a dry paper towel and they should be OK until your're ready to root them. Be sure to clean again before you do.

    Dan
    Roll Alabama Crimson Tide........

  • 16 years ago

    Thanks Dan,

    I will do what you recommend!

    one more question, do I clean and do the 10% clorox both again?

    Cecil

  • 16 years ago

    After reading Dan's post I checked the oldest cuttings. They are about four weeks old. They have sprouts and had mositure on them. I air dryed them and put them back in the paper towels.

  • 16 years ago

    Cecil, yes clean them again using Dawn AB first then follow that cleaning with dilute Clorox.

    Jstall, that coloring on your paper towel is staining and NOT a mold that will affect the hydration of your cuttings. To conserve cutting energy, I suggest breaking off any bud that will be below the soil line in your rooting cup. You want to have at least one or two viable buds on your cuttings that will ideally be above the soil line of your rooting cups......an excess of sprouting buds on your cutting will waste precious stored energy that could be going towards better root formation.

    Dan
    I love Celeste figs.........

  • 16 years ago

    OK, Many thanks Dan,

    I cleaned them with the Dawn AB only just yesterday!

    I will check them in about a week, and do what you recommend at that time.

    Merry Christmas

    Cecil

  • 16 years ago

    I will take them off, thank you.

Sponsored