Software
Houzz Logo Print
fleur_gw

What hosta is LARGE, cupped and puckered?

19 years ago

I like to cast cement leaves. Hostas are wonderful for this hobby. I'm looking for a hosta that is really large, has a somewhat cupped shape and is puckered, crinkled or whatever you hosta experts call that characteristic. Does anyone have any suggestions as to which hostas would fill the bill? Thanks

Comments (18)

  • 19 years ago

    How about H.Abiqua Drinking Gourd, that should fit the bill.

    Bob

  • 19 years ago

    Funny you should ask!!!

    I just took a class last weekend and learned how to make one. I used the biggest Elegans leaf I had. The leaf was around a foot long. Some others were using Elephant Ears and they were awesome!

    I also was just down in my basement 30 minutes ago casting more leaves. I used Montana Aureomarginata, Guacamole, and Paul's Glory.

    I wanted to make a ground level bird bath so it has a lip. The color is a little darker than true life but I like it. It's not quite dry yet (the paint) so it may lighten up a bit.

    Char

    Elegans leaf

    {{gwi:1088969}}

    By the way, the box lid I have it sitting on is a paper box lid so you can see how huge this thing is!

  • 19 years ago

    A mature Big Daddy should also do nicely.

  • 19 years ago

    Char, that is so awesome!
    Wish I could do that.
    Send more pics of your work.

    Fleur, The two that were already mentioned would
    be my choice too.
    Send pics when you're done, ok?
    What a wonderful hobby.

  • 19 years ago

    I've done a couple of these this summer as well, inspired by a friend who has gone crazy doing everything from bird bath size to stepping stones to palm size. The largest cupped and puckered leaf in my hosta garden is Sea Lotus Leaf. I have supplied my friend with Blue Mammoth, Big Daddy, Blue Angel, Frosted Jade, Green Velveteen, Green Sheen, Jade Cascade, Elatior, Montana Macrophylla, Great Expectations, Guardian Angel, Rosedale Tractor Seat, Love Pat, and Sum & Substance.

    I have also cut a number of leaves from my own hybrids, including a two year old seedling with a leaf size of 16x21. In addition to being great fun to make, I am finding that these make a rather nice record of some of my seedlings, showing leaf size, shape, veining, etc.

    If you want the largest possible hosta leaves for casting, plant a couple of giant varieties in nearly full shade and keep them well watered. They will produce fewer leaves, but the size will exceed those from plants receiving more sun.

    When you run out of hostas to cast, canna leaves are absolutely spectacular, especially if you can find some really large ones.

  • 19 years ago

    Thanks everyone. I'm having a ball looking up info on all your suggestions at the hosta website below. They show pictures of hundreds of individual leaves and give the mature SIZES of most of them. Keep the suggestions coming, please.

    Here is a link that might be useful: Mickfield Hostas

  • 19 years ago

    Working with concrete casts is great fun as you are learning...rhubarb leaves are huge and good to use too. I did one last year that measured 37" across. The first one broke on me when I went to "clean" it because I had not put enough concrete on the main vein down the middle. I have made a fountain out of a couple different types of hosta leaves too. Good winter projects,
    Vicki

  • 19 years ago

    Vicki,

    It would be a great winter project, but where do you find fresh leaves in the winter? Beg them off a greenhouse, I suppose. I was thinking the same thing.

    You could use several smaller leaves together on the same project and use houseplants, I think.

    I bought a birdbath bowl this summer where they did that and had pea gravel in between the leaves. Not sure how they did that unless they pushed the pea gravel into the sand a bit before applying the concrete. Then they painted the leaves different colors.
    They used maple leaves and it was awesome.

    I took the Montana Aureomarginata, Guacamole, and Paul's Glory leaves out of the casts last night. Guacamole, and Paul's Glory came out in almost one piece. Montana Aureomarginata, however, took about 45 minutes! The leaf had started to degrade, very thin, and came out in the teeny-tiniest size pieces you can imagine! I think heavier substance is better.

    Char

  • 19 years ago

    Hosta leaves will keep for quite a while if put in a plastic grocery bag, misted lightly and closed tightly and put in the crisper of the fridge. Last year I froze a couple of ornamental rhubarb leaves in the deep freeze on cookie sheets and cast them indoors when the weather got too cold to work outside. They were pretty limp when thawed but, amazingly, it worked. I love experimenting.

  • 19 years ago

    my 'Mississippi Delta' might work well - i love it, even though it's not the largest leaf, it seems sturdy or substantial. thanks for the inspiration Char... can anyone share their recipes for the concrete, or direct me to a website? thanks, ebb tide

  • 19 years ago

    Ebb Tide,

    The class I took actually used Quikrete vinyl concrete patch. It mixes smooth (no stones) with water.
    You add just enough water to make it look like cottage cheese. Make a ball about the size of your fist. Toss it up in the air a few times (just a couple of inches-don't get crazy!)

    If it crumbles apart, it is too dry...don't add much water; it doesn't take much!

    If it hangs down between your fingers, it is too wet...add more Quikrete. (no more than a cup at a time)

    You only have about 30 minutes to work with it so don't make too big a batch.

    If anyone wants a copy of complete instructions, pm me and I'll email you a scanned copy that I put into MS Word.

    Char

  • 19 years ago

    Wow Char! Maybe you could get the "how to info" posted in the FAQ section. Caliloo (Alexa) used to handle that - not sure if she still does. I think the info would be a great addition.

    Teresa

  • 19 years ago

    To get the nice big bird bath size, after I find the perfect leaf, I mound sand up in a nice pile and shape it the depth I want the bird bath to be in. Then put the leaf face down on top of the pile, cover and shape the cement. This has worked really well for me. I make mine large so they can sit in a garden on the ground.

  • 19 years ago

    Sandy--you must have some pics. of your birdbaths--don't you? Please show us your handiwork!!!!

    Char--love your leaf--I'll definitely want a copy of those directions!

    Good to see you posting, dhaven!!! :o) Do you have any pics.of your pieces, too?

  • 19 years ago

    My directions for making leaves came from the May 2004 Better Homes and Gardens magazine and a class that I took. It is 1 part PORTLAND cement to 2 1/2 parts of sand and I do "dump" in about 1 cup of cement harding agent. (A mason that I know says you can go lite on the sand to about 2 parts) To this mixture you add water until you have the consistency of cookie dough or very thick icing. At this point you can also add a coloring agent. I mix mine in my wheelbarrow or a very large plastic container...then you make a mound of moist sand on a sheet of plywood or some other large surface that can be left undisturbed for several days. Cover the mound of sand with plastic wrap or garbage bag. Lay your leaf top side down on top of the plastic. Spread the cement over the leaf (pat it like you would pat a "babys bottom", I was told!!)working top to edge of leaf. Make sure that you do not loose site of your leafs edge because this will asure you have a sharp and clear edge...no cement running over or under the edge of the leaf. I learned the hard way to make sure you have enough thickness if the veins of your leaf is thick and if the leaf is large. Cover all of this with more plastic and allow to cure for 48 hours. You then put the whole leaf in a tub of water for up to 3-4 days to continue the curing process and make leaf and leaf vein removal easier. As I said before I made a very large one and it cracked right down the center...however, I did keep it and simply put a polyurethene on it and it "peeks" our from under a couple of my hostas. My husband helps me dry brush paint mine because he has an arts background and is more imaginative then I am when it comes to blending colors. Oh by the way, I do know from a local artist that you can buy molds in different leaves to make items. Hope this is helpful...
    I like your leaf Char and have one just the same colors sitting on a lamp table in my LR. Oh, my friends cubscouts did this for gifts...soap dishes etc.
    Good luck, Vicki

  • 19 years ago

    thank you everyone for the recipes and helpful instructions! guess i'll be making a birdbath for dh this winter - something to look forward to, other than doing needlepoint and knitting gloves in front of the gas fire!

  • 19 years ago

    Just a thought.....

    I recently found these little bird baths/feeders at a dollar store for $2.50 each (50% off)

    Although I've never made leaf casts, I saw these wrought iron frames and thought maybe these would work for those of you that do make them.

    Just a thought.....

    {{gwi:1088970}}
    {{gwi:1088972}}

  • 19 years ago

    I saw an article for a project similar to this in an issue of Canadian Gardening. Looks interesting. I'll have to try it next year or maybe this year since my rhubarb plant is still alive. Here's a link to the online article http://articles.canadiangardening.com/Mochasofa/client/en/homepage/DetailNews.asp?idNews=235482