Software
Houzz Logo Print
gardenboo

Some questions from a newbie

21 years ago

Okay, I'm finally close to finishing my raised beds, 3 at 10'x4'x12". I just have a few miscellaneous questions about SFG:

1) For vertical supports I'm thinking of 1/2" pipe or electrical conduit. The conduit's 1/2 the price of pipe. If I used the conduit, how do you construct cross pieces. Are there elbow joints as with pipes? Can the conduit be threaded? Also I saw a picture posted by Down-and-Dirty showing netting or wire (hard to tell) strung between the supports. Any idea what this is and where to get it?

2) The author of SFG recommends making little 12 inch wire cages for various types of protection, but I can't see having a bunch of these things laying around in the garage when not in use. And I don't think they would stack very well either. What are other people using?

3)Anyone see that a new edition of SFG is coming out in May of 2005? I was thinking of getting a copy. Up till now I've been using a library copy from 1981.

Comments (8)

  • 21 years ago

    I used 1/2" thin-wall (E.M.T.) conduit for my trellises last year. It can not be threaded. If you look in Lowe's or Home Depot, in their electrical dept., they will have set-screw type fittings to join the corners. These fittings look like a 90 degree elbow with a removable cover on the back of it. If you want to be a little more fancy, you can get a bender to bend the conduit then just use regular straight couplings. My trellis was 8' long. The conduit bowed slightly at this distance, but it held 6 tomato plants just fine. If your trellis is 10' long, you might want a support in the middle, unless you went to 3/4" or 1" conduit. There are electrical fittings to join a tee, but it may not look too good in the middle of a garden trellis. You could also use 1/2" rigid (heavy wall) conduit. This is much more expensive, but it can be threaded and you could use threaded water pipe fittings for the corners.

    About the cages, I made some a couple of years ago, and they were more of a hassle than anything. Planning on fencing off the entire garden this year.

    TheBug

  • 21 years ago

    I used electrical conduit for my trellises. For the crossbar on top I used a piece of wood. Drilled a hole in the conduit and the wood and attached the wood using a 3 inch bolt and wing nut. I also drilled holes every 6 inches in the conduit for stringing Twine across to create a net type support structure.

  • 21 years ago

    Okay, went to Lowes today and I think I have this figured out. A 10ft piece of 1/2 conduit is only about 2.69. Wow! That's encouraging, I thought. Then I found the little set-screw 90 degree elbows you were talking about, Bug. Then I thought what could I use to support the middle of a long 8ft horizontal piece, for example? They didn't have anything like a "T". So I went over to the PVC pipe section and found a slip T-joint for 1/2 inch PVC, took it over to the 1/2 inch conduit and the conduit slides right through the top. The bottom of the "T" would fit loosely over the end of a vertical piece of conduit used for support. I figure it doesn't have to fit tight, the weight of the whole thing plus the plants will keep it down, and we don't have strong winds around here. I think I'm in business. Now I just have to find some sort of netting material that I can "weave" conduit through. And maybe I can use those little "U"-shaped metal brackets from the conduit section to hold the conduit to the 12" side of the raised beds. If it fits loose enough, I can move the trellis around to wherever I have brackets already mounted. Whew! Progress!

  • 21 years ago

    I just had an interesting thought about the wire cages ... you can get "storage units" which are made with wire panels snapped together to form boxes in any layouts you want - the panels are about 12" across and usually coated with plastic (I've seen white, black, and multi-colored). You could put those together to make whatever cages you want, then take them apart again at the end of the season to stash flat. The plastic coating would keep the metal from rusting, and they should last for a number of seasons. The black ones would visually "disappear" among the plants, I think, while the white or colored ones would be more obvious and you'd have to work them into a color scheme for the garden. Check at discount places like Costco's or BJ's or Sam's Club - I got mine at BJ's, I think. (Now I'm going to have to go get some more to try them out.)

  • 21 years ago

    Wow, what a great idea for using the cubes. I have extra from when I constructed my rabbit cage, now I know what to do with them! Hopefully they will keep the raccoons out of my garden!

    They also sell them at Target, I think I bought 2 boxes for 22.00 on sale before.

  • 21 years ago

    You know, I hadn't thought of that - using those storage unit squares as cages for the garden. I have about 40 - 50 of those left over from a big guinea pig cage that we're no longer using. I'll try some. Thanks Demeter!

  • 21 years ago

    What are these squares, can someone post a pic?

  • 21 years ago

    Sorry, no digital camera to post a pic. But what they are are these approximately 12 inch x 12 inch grids made of plastic-coated wire. They come in different colors and are packaged twenty something to a box. They come with these little plastic connectors used to fasten the corners together (or you can use plastic cable ties.) You find these grids in stores like Costco, Target, etc. on the west coast. They are typically used to assemble a storage unit for the house or garage. You can store papers, magazines, etc. in them or just use them as shelves for displaying whatever. Check the discount stores that carry all sorts of things for the home.

    Okay, after all that I just found a picture online. Check below. Oh, and it looks like they are 14 inches square, not 12.

    Here is a link that might be useful: shoplet.com

Sponsored
Industry Leading Landscape Contractors in Franklin County, Ohio