Software
Houzz Logo Print
susancol_gw

A different Tomato trellis question

16 years ago

So, I have a 4x8 raised bed in which I put 8 indeterminate tomatoes each year. Last year I staked but was not satisfied with the outcome. This year I have decided to trellis. No, not cage, trellis. For various reasons. Moving on. I've seen several examples of folks who have a similar setup who run the trellis down the middle and grow the tomatoes on either side. My concern is this. If I'm lashing the tomatoes to the same trellis from either side, won't that cause them to have little to no air circulation in the middle? Won't that be a disease haven?

Prune? you say? I don't want to prune. At least not much. So I was thinking of running twin trellis down the center with a gap of about 8-12 inches. Am I crazy? Is this overkill and unnecessary? Any suggestions or reassurance would be appreciated.

Susan

Comments (7)

  • 16 years ago

    I think either would work Susan based on my experience. The single cattle panel would be cheaper of course and it you stagger plant on either side of it

    X - X - X - X
    ================
    - X - X - X - X

    the air circulation should be adequate. Is your predominant wind down the length of the row or across the row?

    Dave

  • 16 years ago

    Wind flow is down the length which is why I was picturing the space between the two trellis as a way to create airflow to all the plants. With last year's staking, the stakes all leaned into one another and with the wet weather we had, that lead to foliar disease issues. But if others have done the single trellis successfully, maybe I'm over thinking.

    When you run the trellis down the middle, does one plant the tomatoes in the center of the two foot space (i.e. 1 foot away from the trellis on either side) or should you plant close to the trellis, with all of the extra space left on the outside of the box?

    Susan

  • 16 years ago

    Susan, this is what I did...I made a Tomato Pergola...

    It had 4 posts (sitting in concrete blocks so could be moved to another bed) and 2x4 runners across the top (complete with the angled cut on the end that pergolas have). the "roof" of the pergola was made with purchased deck balusters, also have 45 degree miter cuts on them like pergola roof pieces (less than $.50 each, too).

    I tied a clothesline to the pergola where I wanted the tomato, which had several knots in it with a strip of t-shirt for securing (i.e. staking) the plant as it grew. I also came along now and then and "tamed" the plants with gardening twine.

    I did not spray and had no notable disease problems or plant failure.

    This worked very well for me as it was aesthetically pleasing (my tomatoes are right by my back door) and neat, and it's impossible for the plants to fall down. Also, since the plants are tightly planted, this is the only way I can grow indeterminates in such a way (and the pergola is 8' tall! the plants just go to the top and then they are on their own).

    I hope this makes sense...I try to explain and people say..."what?"

  • 16 years ago

    kterlep,

    Thank you for your response, and what a neat idea. I'm not sure it would be a good solution for me though, as I'm concerned about too much shade as in my location as it is, and the 'roof' of the pergola may add to the existing issue. I can see where in a really sunny location, the amount of shade it provides would probably be good for tomatoes, giving them some relief from the hot summer afternoon sun, but in my dappled shade, I fear it would be detrimental to production.

    Susan

  • 16 years ago

    susan - I'm going to try a variation on dcarch's method. It sort of resembles a florida weave, but it's really not the same thing. It looks very efficient. Only 2 posts required per row. I'll post a link to a discussion about it.

    Here is a link that might be useful: link to discussion about dcarch's tomato supports

  • 16 years ago

    Susan

    Here is my use of cattle panels as a support for tomatoes:

    As digdirt mentions, if you stagger-plant them, you should have no problems with air circulation. But to be honest, that isn't something I paid attention to when I planted on both sides. I was more concerned about root space and that was why I stagger-planted them, accomplishing the same thing, I suppose. In the midst of summer, with eight plants in your bed, it's going to be a jungle anyway.

    My only complaint about supporting tomato plants in this way is that some of the wayward branches are hard to keep pulled in toward the trellis. The plants do want to grow in all directions, including perpendicularly to the trellis. That's okay in most cases, but the occasional rebel will stick way out beyond the borders of the bed. I've been trying to figure a way to keep the plants a little tidier, expecially the large and wild-growing heirlooms. I use strips of plastic grocery bags for tying the tomatoes to the cattle panel --they're free and soft, don't cut into the vines. Even better would be something to wind in a spiral around the plant and fasten to the cattle panel at various spots. But I suppose the same thing happens when tomato plants are in cages.

  • 16 years ago

    Thanks for your response, Gardningscomplicated and Anney. That's 3 votes for stagger planting. So it seems like that might be the solution. Now I just have to resolve the water issue I have. The soaker hoses don't hit the edges of the bed with water very well, so any plants too close to the edge don't get enough...

    Thanks again for the responses, ideas, and reassurance!
    Susan