Software
Houzz Logo Print
rick2752

Ultimate Tomato Cage system

19 years ago

Here is my tomato cage system. Works great, I have a soaker hose under the fabric and the fabric keeps any tomatoes that drop from rotting. As the plant get bigger I just pull the branches out different holes in the panels. 4 panels about 15 dollars a piece, 3 posts around 3 bucks each, and landscape fabric.

Here is a link that might be useful: tomatoes

Comments (13)

  • 19 years ago

    Looks too short to me unless the vines are just going to fall over on top of the cage. Also, doesnt the black tarp get too hot and start to burn the roots?

  • 19 years ago

    Actually it is betweeen 4 and 5ft tall, I have had them poke out the top but I try to keep my plants under 6ft. lol...The black stuff isnt tarp but landscape fabric, it breathes and lets water through but stops weeds. I have been using this system for about 4yrs now and never had any problems.

  • 19 years ago

    Wont the tomato plants smash into the wire fence as they grow

  • 19 years ago

    No if they grow taller than the fence they just grow out the hole in the top on one side or another. When the branches get long enough they hang out the holes in the panel just like a cage.

  • 19 years ago

    What panels are you using?

  • 19 years ago

    Are those cattle panels bent in half?

  • 19 years ago

    Yes they are cattle panels from tractor supply, but no they arent bent in half. They are full panels leaned up against one another. An upside down v, make sure to wire or tie them to each other or the posts. Last year I figured they would stay and forgot to tie them up. A big storm came and blew them over breaking alot of my plants.

  • 19 years ago

    Looks like a nice setup but i think i still like my tomato cages made out of CRM. I am just one of those people who once they find something they like they have a hard time changing.

  • 19 years ago

    i like it. i do prefer to use grass clippings to keep the weeds out and build the soil over the landscaping tarp. but the system looks good. good job !

  • 19 years ago

    The only negative with cattle panels are their height and size... I think they are maybe 15-16ft long but only somewhere around 48-52" tall? You can always use longer posts and raise the bottoms of the panels up higher.

    If you only use that setup for 1 row, you can also run them parallel to each other like I do with CRW sheets, but you'd need more posts. Or you can bend the last 2-3ft of a panel to make an "L" and put 2 together to make a freestanding rectangle 12-13ft long x 2-3ft wide. (CRW sheets I make a 7ft long x 3ft wide cage out of 2 10ft sheets.) But I still like your idea for determinates and plants up to 4-5ft tall. What do you do for 7-8ft tall plants?

    How do you get them home?

  • 19 years ago

    Rick,
    Welp, I've never been accused of being the sharpest tool in the shed... but for the life of me I don't understand this setup!

    Do you tie the plants to the inside of the fence as they grow? Or do you train them to grow through the squares down low and then up the sides?

    Don't get me wrong -- it really looks good but I just don't see the functionality of this rig!
    Thanks,
    Terry Light
    Oak Hill, Virginia

  • 19 years ago

    What is the CRM? Always looking to improve my setup. As for the plants I usually just let them grow until they are able to reach one of the holes in the panel. I can pull the limbs out through the panel holes and then tuck them back inside the panels to support the plant. I'll try and take a pic when they get bigger so you understand. Sometimes if I get a plant that really wants to lay down I will tie it to a panel until it gains enough height to branch out and hold its own. I really dont have alot of problems with the plants getting to big, if they do I just pull through the top and let them grow back down on the outside. You can wrap limbs around the panel itself and the tomato holds itself up or use string. Im so jealous of they people down south showing tomatoes ready to eat!!!

  • 19 years ago

    CRM is concrete reinforcing mesh. I am in the precast concrete business so it is easy for me to get. For 20+ years I have used a 6-6 6-6 mesh.This means there is a 6 gauge wire each direction at 6 inch centers. Mine are 20feet long both 6 and 8 feet tall I use a 8 foot pieces of 3/4 inch rebar for stakes,at 10 feet canters.these hold up tomatoes ,woven in and out verticaly. I also do cantelope,watermelon[up to 10 to 12 inches]beans and anything that climbs. I have never had to replace any mash.The good thinh about this system is that the rows can be your normal spacing as the tomatoes only take up 8 to 10 inches in width.[thet was shown in the above pictures]

Sponsored
Haus Studio
Average rating: 4.8 out of 5 stars28 Reviews
Franklin County's Preferred Custom Cabinetry & Design Studio