Software
Houzz Logo Print
cursivesailor

Do I have to have a Backsplash?

17 years ago

Do I have to have a backsplash on my vanities? I really dont like the look of the countertop material being added to wall for 4 or so inches? What options do I have? Do I have to have a backsplash?

Comments (20)

  • 17 years ago

    I just dont like the look of the counter material as a backsplash.

    See how this vanity has that strip of white countertop material attatched to the wall. I don't like that look. So I am trying to figure out what I could do there instead.
    {{gwi:1392926}}

  • 17 years ago

    Are you going to tile the wall behind the vanity? If yes, then you don't need a BS. My bathrooms have tile on all walls so I don't have BS on the vanities.

    You can also install washable wallpaper designed for bathrooms. If it'll be just paint, you need something to protect the wall from splashing.

  • 17 years ago

    1/8" glass with frosting behind it. As big as you like.

    Plastic like the kind they use to protect kitchen cabinet shelving. Any shape on the wall.

    Really expensive paint.

    Sheet material of any kind 1/16th" thick. Any shape on the wall. Metal, Neoprene, Polyester, whatever.

    Anything to prevent H2O sprinkles and splashing droplets from ruining the average wall.

    HTH
    -david

  • 17 years ago

    You can also curve that backsplash to get a better looking line...ie:
    {{gwi:1388179}}

    You can see how the sides curve at the end here:
    {{gwi:1388178}}

  • 17 years ago

    I didn't use a backsplash but I did do the lower walls (it went up several inches behind the countertop) with PVC beadboard. It protects the painted walls, does not react to water and looks great (IMO). I'll paste the link below

    Here is a link that might be useful: my bathroom

  • 17 years ago

    Or pick something totally different from your countertop for the backsplash--like those pretty glass tiles or something like that.

  • 17 years ago

    you are only limited by your imagenation

  • 17 years ago

    We will be using the same mosaic boder strip that will be in the shower as a "backsplash" strip of sorts. If/when this bathroom is ever completed, I'd be happy to post pics. *sigh*

  • 17 years ago

    I'm really liking the way that beadboard/wainscottsing/whatever is looking. But I am on a really tight budget. I wonder what that would cost.

  • 17 years ago

    I just got a 4' x 8' panel of it at Home Depot for $17. This one is the pre-primed white one, the price goes up from there (to $38) for wood. I actually prefer the grooves on the white one, which are deeper, than the wood ones. We are using this as the back of a glass fronted cabinet and as a backsplash in our kitchen and they will be painted. For our use, using the sheet as opposed to the tongue in groove made the most sense. However, if the beadboard is in a more visual space, or you are doing a wainscoting for the whole bathroom, you might want to price out the tongue in groove as well. My father-in-law, who did his whole laundry room/ half bath in the beadboard sheets said in a large space the tongue in groove would be much easier to work with and seamless.

    Actually, if you did sections with flat pieces of wood to frame them (sorry if I am making no sense, my husband is the person who translates and deals with really building the projects) you wouldn't have to worry about the seam. When I searched wainscoting, I got the bottom link that has a nice photo of what I am talking about.

    Good Luck!

    Here is a link that might be useful: Wainscoting Long Island

  • 17 years ago

    Igloochic I LOVE your bathroom! Don't know how I missed it before- but great job. Have you thought about dressing up your switchplate cover on the light switch? Everything looks SO rich and unique- except that one element. Thanks for sharing (and sorry to hijack the thread!)

  • 17 years ago

    Lady you have a good eye for detail :) Actually the bathroom isn't finished yet so I haven't posted it all (more pics are in the espresso cabinet thread). On top of all of the other little things that need to be done (that cabinet is missing it's corbels and trim) I'm also having switch plates made from the travertine we used for the floor and walls of the tub. The switch plate on my side (that is DH's side) is causing some problems, but I finally found a company who will make it custom for me, so I just need to send off the tile next week and in a couple months we'll have switch plates that match the room better (I hate plastic plates...they're up there for inspection purposes only).

    {{gwi:1388177}}

    I wish I could take better pictures of my glass. It and the croc tile are two of the best features. I had the glass actually made for us, so it's unique to us alone. I keep leaving tongue prints on my cabinet doors from licking it.... :oP

    I was trying to find a pic of the ugly switch plate...that above one isn't it...here it is:
    {{gwi:1392927}}

    The artist who did the walls will do the plastic portions of the switches and the fan controls in the same finish as the walls. His touch up is the very last thing that will be done so it's a ways off. In my other rooms he's finished all of the switch plates...this is the one in my son's safari tent:
    {{gwi:1392928}}

    My son's room is a 1930's safari tent. Where the tent fabric pulls back you see all kinds of animals and plants peeking in. On all of the plates, they have just covered up the plate with their finish. He did the same in the entry hall and kitchen (which have plaster finishes).

  • 17 years ago

    The more I see the more I love it. I am a big fan of the dark wood. And I can see your glass kind of, which is another unique touch.

    Those switch plate covers are a pet peeve of mine. I am amazed at seeing so many beautifully decorated rooms with those dang 20 cent plastic plates! Thanks for sharing- you must love being in there.

  • 17 years ago

    Actually, I dont think any of our walls in the bathroom are longer than 8 feet before they bend so we might be able to get away with the sheets.

    I just dont know how much it would cost to install it and do the molding. I am completely dumb when it comes to building anything. And so is my fiance.... he's the artsy music guy. Not the kinda guy who even owns tools!

  • 17 years ago

    I didnt see the PVC sheets of beadboard that Brutus was talking about. I saw some for 21 dollars at Home Depot and some for about the same at Lowes. Printed a pic of Brutus and Folkman's bathrooms and dropped it off at the contractors. Waiting to hear what he has to say.

    -Fingers crossed-

  • 17 years ago

    I did not use a back splash. I painted the walls and added a long mirror as a back splash.
    How do I insert a photo? I only know how to add a link to the URL section?)

  • 17 years ago

    cursivesailor,
    Folkman here. Mine came from a lumber store. I never saw them at Home depot. Mine are about 8 inches wide and slip together. PVC WILL be more expansive. You can use the wood ones you see at the big box stores. They are cheaper but, in my opinion, don't look as nice since their grooves are just shallow, only 1/16 or so in the wood. My planks are 1/2 thick so you can get a deeper groove in them. You can get away with real wood but I would just paint it with oil based paint, not latex. This would help make them water resistant like the PVC stuff does naturally.

    Many suppliers make the PVC stuff in their own brands. There is Azek.com which is one brand that a lot of contractors can order from their wood dealers. But many places have their own version of it. I used liquid nails to adhere the boards to the wall along with a few nails to keep it in place as the glue dried.

  • 17 years ago

    Thanks so much, Folky! I will do some more research. The stuff I saw at HDepot didnt look too great. But I'll look around a lil bit. Hopefully the contractor can figure it out for cheap!

  • 17 years ago

    Here's another option.