Software
Houzz Logo Print
mondragon_gw

Most practical for shower floor

16 years ago

The plan currently is to have 1" glass tiles halfway up the wall in the room; the shower walls to be a simple white subway (with accents of some kind); a niche with the same glass tiles in the back, and ????? for the shower floor.

I've read through all the threads that I could find searching and believe that the glass tiles would not be good (too slippery.)

In people's experience, what is the most practical tile to use for a shower floor, in terms of slip resistance and (most of all) straight-forward cleaning? I've got textured ceramic in my other shower and the soap scum grabs hold and requires strong chemicals and lots of scrubbing to get clean. I don't want to repeat that mistake.....

Comments (4)

  • 16 years ago

    It's a double edged-sword. Greater traction will mean more difficulty cleaning since the same crevices that give your feet traction give that funk a place to grab on. We used matte finish 1" hex in our main walk-in shower and have had no issues whatsoever. I wouldn't think the 1" glass would be a big issue because you will have lots of grout joints. A larger slick tile would be slippery, but I would imagine you will be fine with the glass. Then again, I'm not an expert and have not used glass tile before.

  • 16 years ago

    single digit hit it, it's a balance. The more slippery the tile, the smaller you want it to be. Smaller tiles means more grout lines, more grout lines means added traction.

    I'd say the "most practical" would be 3" to 4" ceramic. It's a decent size, large enough but not too large, and gives a good balance of tile size versus grout lines.

    Going with slick tile on the floor? While not the safest choice, I'd say a max tile size of 2", but smaller would be safer. That still gives about 4 grout lines under foot.

  • 16 years ago

    It's a double edged-sword. Greater traction will mean more difficulty cleaning since the same crevices that give your feet traction give that funk a place to grab on.

    I'm going to be the stick in the mud here-- on both counts-- texture AND size. As far as the italicized statement, unglazed ceramic mosaics give you the best of both worlds-- The fact that they're porcelain and non-absorbtive, as well as the fact that they've got some pretty good "grab" to them make them an excellent choice for a shower floor, which is probably why 99% of all commercial or institutional tile shower floors you see are unglazed ceramic mosaics.

    Secondly, with reference to size, The request is usually to keep the tile size to under 6", and the smaller, the better, so as to better conform to the pitch of the shower floor. Again, as I explained above, something that small would be great, except for the part about trying to hold pieces while you cut em!! (leaving them on the sheet usually isn't an option, because as soon as the water from a wet saw hits the sheets, it's a race to get them back to the shower after cutting, and get them in place before the sheet of tile starts falling apart)

    Best all around size, as far as I'm concerned, and this is strictly from a safety and technical point of view, would be 2x2's. They provide for an increased number of grout joints to add to the traction provided, they conform well to the cone shaped slope of the shower, they won't absorb any moisture whatsoever, and they're easy to keep clean.

    Again, this has nothing to do with aesthetics, although I don't see 2x2's as a BAD looking floor. :-)

  • 16 years ago

    I do recall on a blog I visit that someone installed glass tiles in the shower floor and several had sharp edges. Installer error? I don't know because I've installed two glass tile mosaics and never had sharp edges.

    I'm looking to do a small, blue glass oval in my master bathroom floor (as a bit of a secret surprise since the planned field tiles are just white 6x6).