Software
Houzz Logo Print
tcjohnsson

sloped ceiling or no slope?

17 years ago

I'm building a split level home with a rooftop deck. My contractor placed the joists at a slight angle - about 1/4" per foot - so that the rooftop can drain properly. My contractor gave me a choice on the interior space on the second floor. I could keep the ceiling at the same slight angle (slightly more than a 1/4" per foot) in the interior to gain extra height in the rooms and bathrooms OR he can drop the entire ceiling so it is entirely level at 8'. The joists are about 16' long so it starts off at exactly 8' on one side and by the time it gets to the other wall I have a ceiling roughly 4 1/2" taller. This sloped ceiling would affect my entire top floor consisting of two bedrooms, two bathrooms and a hallway area.

The extra height is nice (if you look at it from the middle of the room, I'll have about 2" more ceiling height for the entire room). But there are problems with this slope. For one, I think it looks somewhat goofy. Almost like the ceiling is "crooked", and someone messed up. The other issue is that I am installing lighting soffits on one wall in each bedroom. The soffit serves several purposes - 1) to light up the ceiling (using rope LED), 2) to light up the room below (using recessed 4" cans) and 3) to house the window treatment track/or roller.

The soffit was going to be about 4 1/2" thick and stick out 14" from the wall. There would be about 7" of space between the top of the soffit and the regular ceiling (area the LED rope light would illuminate). It would look something like this but instead of against a wall, there is a huge window -

http://img48.imageshack.us/img48/4011/imgp1257tt5.jpg

So as you could probably imagine, running this lighting soffit would be difficult if the ceiling was slightly sloped. One "solution" would be to keep the bottom of the soffit parallel to the floor and the top of the soffit parllel to the ceiling. This way the soffit itself takes on very subtle triangle like shape. Kind of like a really low incline skateboard ramp. It would start off about 4 1/2" thick on one end and then end up about 9" thick on the other.

The other option is to keep the soffit "square" so the bottom AND top of the soffit is parallel to the ground. Problem with this setup is that the LED rope lighting would light the ceiling inconsistently. Where the LED is closer to the ceiling, it will be brighter. Where it's farther from the ceiling it will be less bright.

One thing to consider is that these units are very small... so any height (and architectural elements) I can gain in the rooms is beneficial, at least more than it would be in a typical home.

So my options would be make the entire ceiling flat at 8'. Or slope it so I gain 4 1/2" on one side and a gradual linear decrease to the other side at 8'. And if I should slope it go with the square soffit or triangle/parallelogram-ish shape?

Thanks in advance for any feedback!

Comments (4)