Software
Houzz Logo Print
constant_gardner

Replacing subfloor that extends beyond a partition wall

17 years ago

I'm remodelling an upstairs bathroom, and I've ripped out the bath, the toilet, and the vanity, and pulled up the tile floor. But I've found that both the toilet and the bath have 'leaked' and that most of the subfloor is rotten and urgently needs replacing.

However the rot in the bath alcove extends beyond the alcove, under the partition/stud wall into the next room (another bathroom). In addition the sole plate (the bit of wood that is the base of the stud wall - I'm a Brit so my terminology is not always correct) has some rot, although most of it is fine. Finally the wall runs midway between two joists.

What is the best way to replace the subfloor? I'm planning on redoing the other bathroom next (should I ever finish this one), so ripping up the other floor in the other bathroom is fine.

My plan right now is to first support the stud wall, then dissect out the rotten part of the sole plate, then cut out the rotten section of subfloor in the bathroom extending into the next bathroom as far as the next joist.

Then re-lay marine grade ply as the new subfloor, insert a new section of sole plate, and sister it to the adjoining sections.

Anyone got any better suggestions?

thanks

Comments (4)