Someone with some experience can cut a sink cutout in the tile with a multi tool (Fein or clone). Someone without experience using the tool may crack the tile (a couple of times) so a LOT more waste and cutting waste needs to be factored into this than you may be planning. (Large tiles always have more % of cutting waste than smaller ones do, and yours is large enough to need a doozy of a waste number. I'd say closer to the 25% than the standard 10% overage will be needed. And you will need a hellaciously good quality tile saw to do any cuts on that at all.)

This post was edited by hollysprings on Thu, May 23, 13 at 22:49