Software
Houzz Logo Print
kateskouros

Q about purchasing tile from different sources

18 years ago

hi all. i decided on tile for our MB the other day. i'm going with a very beautiful (ie: very expensive) oceanside glass tile at (deep breath) $56 sq ft. from artistic tile. it's a pave custom facets glass in creme brulee. though we're using it "sparingly" it still comes out to about $2500. the bulk of the tile cost is in the marble, which is botticino tumbled. i need 12x12s, 3cm mosaics, 4x4s and bull nose and pencil trim. the 12x12s are pricing out at $18 per sq which is insane since i can get it through my marble/granite fabricator for MUCH less. the marble priced through artistic is priced out at over 12K. NOT going to happen. so on to my Q: if i just buy the oceanside glass tile through artistic and purchase the marble (at a much more reasonable rate) from another vendor, how exactly does the tile guy know how to lay all this tile? will the guy at artistic do a drawing, even though i'm only buying a fraction of the order through them? -probably not. so how does this work? how do i get a drawing, or some sort of guideline on how to lay the tile?

TIA, i'm losing my mind.

Comments (2)

  • 18 years ago

    Why not do your own drawing? Get some graph paper and colored pencils, it isn't hard. No one knows more about what you want than you do...

    I think it's fine do use different suppliers, but you should probably keep all the tile of a given size and type from the same supplier. That way, the marble should be coming from the same part of the same quarry, and the actual sizes [as opposed to nominal, ie: labled size] will be similar.

    The more sizes and types involved, the more important it is to have a craftsman doing the install. Even then, don't expect perfectly regular grout lines. They should still be straight, but they won't be identical.

  • 18 years ago

    Work with your tiler. And here is a good place to remind you to look at several of his/her previous jobs! Allowing for the fact that the more sizes and thicknesses of tiles are used, the more difficult it is to lay well, but you should be able to get a feel for the quality of work done. If you aren't comfortable, don't hire -- your subconscious may be noting crooked tiles or sloppy grouting where your conscious eye didn't pay attention.

    I assume you have samples of each tile, if not, do get. Work up a sketch of what you want, it doesn't have to be to scale, but does need to show patterns and which tile is to go where. Label carefully. The tiler will also be able to estimate the amount needed of each size; and don't forget that the more complicated your pattern and/or the more cuts needed (for curves, corners, odd sizes) the more tiles will be used -- which can drastically up the overall cost.

    Don't forget that a few exquisite tiles can be showcased at eye-level to draw attention to the individual tiles, while being surrounded by much less expensive ones. Let's face it: once the tile is laid, the ones in the corner, on the floor, and behind the toilet, just aren't noticed much.