Software
Houzz Logo Print
daycare203

Hood size vs stove

15 years ago

I need professional advice on a range hood decision. I am absolutely in lust with this Italian range hood and my contractor told me that I shouldn't get it because it wont perform well with my stove. My stove is 30" (4 burners) and this hood is 26". I have read several threads here on GardenWeb that it is mandatory to go with an exact size hood or larger for best performance. However, I want this specific design, it's gorgeous and there's absolutely nothing even close to it that I was able to find. I don't cook a lot and I don't fry or steam. Can someone please reassure me that going with a 26" in hood will be okay for my 30" stove, considering my "non-pro" cooking habits.

Heres the hood:

Comments (8)

  • 15 years ago

    I'm going to guess that this is not a standard hood, and that the slats on the sides allow effluent to be extracted. If so, the 'standard' rules do not apply.

  • 15 years ago

    What is the make and model of that hood?

    Looks like it is over a 30" cooktop.

    Maybe our resident ventilation expert will chime in?

  • 15 years ago

    Futuro Furtor Pearl
    25.75" wide and 16.14" deep
    940 cfm at 3.2 sones through 6" duct
    4x LED lights
    MSRP $4,900
    "Sale Price" $3,295

    I think the slats on the side are not to extract effluent but for a light show.

    Looks like Manolo Blahnik marathon shoes.

  • 15 years ago

    I think its beautiful; I'm not sure how well this hood will work, in practice...

    From the Futuro Futuro website (link below; see photo #3), this wall hood is (almost) 26" X ~16", and its up against the rear wall. This suggests it may be most effective for a burner located at your cooktop's center rear position (note photo #1), and least effective for burners at the front, especially left or right. You might consider your cooktop's layout, where its largest burners are, and which ones are likely to produce the most smoke (etc.).

    Here is a link that might be useful: Pearl Black Futuro Futuro wall hood

  • 15 years ago

    I'm sorry, it's too Darth Vader for me. What is the style of your kitchen cabinets and counters?

    Here is a link that might be useful: Darth Stewie

  • 15 years ago

    The reason why I like this piece is because it sort of looks like a rare flower and in my kitchen I'll have black glass rounded cabinet doors - so I'm sure it will match well and become the focal point of the kitchen.
    I'm going for the black-and-white futuristic look and when I found this hood I just fell in love. So, it really looks like Ill be going with this one. The manufacturer advised that I install it a few inches closer to the stove, I might just do that.

  • 15 years ago

    Good for you! Seriously, life is too short to not get what you want in a remodel/build. So you have a bit of compromise in the hood? So it isn't perfect? Who cares. The main thing is that YOU are the one who has to look at and listen to the hood every day. I don't care how well some big clunky Ronald McRangehood performs over your cooktop, if it is ugly you will be kicking yourself for not getting the thing you wanted when you had the chance. I do not care what any blower expert says, you do not have to have perfect range hood performance in order to have a marvelous kitchen and a perfectly functional cooking space. So by all means, get this beautiful range hood if that is what you want.

  • 15 years ago

    If you are not going to cook anything greasy, steamy, or smelly, then the only requirement is to remove the combustion products that result from burning gas (if the cooktop uses gas). Otherwise, you don't need ventilation at all. (If ventilation is not the goal, then just do whatever looks good; there are endless pictures of poser kitchens published without any visible evidence that ventilation was even thought about.)

    For actual cooking, the ventilation goal is that the hood capture and contain the effluent. The effluent rises from the cooking surfaces and expands as it rises. The requires a hood that overlaps the cooking surfaces (pan bottoms) by an amount that increases with height.

    I would wonder about the noise level from pushing 960 cfm through a 6-inch duct. But this can be solved by not turning on the unit.

    kas