Software
Houzz Logo Print
yarrowme

copper sinks

18 years ago

Does anyone have any advice on hammered copper sink basins? I am particularly interested in hearing from anyone who has one and how they like it. Are they easy to care for? Any advice on how to know what dertimines a quality one? I thought it had something to do with the gauge of copper but in all the discriptions of the bowls I've seen there is no mention of the gauge or thickness of the copper. Any recommendations on where to buy one?

Hopefully someone can help me out here. Thanks.

Comments (21)

  • 18 years ago

    Thanks for the link. It looks pretty informative and speaks to the properties and gauge of the copper. I'll see what I can learn from it. I am still hoping someone who has a copper sink can share their opinion. Anyone???

  • 18 years ago

    Search the kitchens forum. There were a couple of threads not too long ago, one of which had bathroom sink pix. The sinks are beautiful. There's an ebay site with good information referenced in one of the threads.

  • 18 years ago

    I have two hand hammered copper sinks from mexicopper on ebay (I highly recommend them). They're easy to clean (quick wipe with soap and water). You want a minimum of 16 gauge and you want to make sure they're welds are done with copper instead of whatever else is used to weld :) Other metals wont patina the same as the copper and you'll see a big line on them. (Mexicopper uses copper welds).

  • 18 years ago

    Thanks igloochic, that's just the kind of feedback I was looking for. I'll check out Mexicopper and head over to the kitchen forum. Thanks.

  • 18 years ago

    I heard from a woman with them that she coats them with baby oil, as toothpaste not cleaned thoroughly from them, removes the patina and causes the copper to shine. Other than that she really loves them. Of course they do look beautiful!

  • 18 years ago

    I have a beautiful copper sink in a bar area in my kitchen with a rohl bronze faucet. It's just beautiful. It's round, was not cheap and I just love it. I really don't clean it much. It does change color with time--it ages--but you can sort of refurbish it with a soft scrub or another cleaner and it looks newer for a while. I love the aged look though.

    You're right, copper sinks are not all equal. I bought mine from a nice faucet store and it is a heavy hammered copper.

  • 18 years ago

    I may be one of the people that posted on the kitchen forums, but we have lived with a few different copper sinks for some time.

    I have put a link to probably the best article I have seen that should give you more info on copper sinks than you may want. Very informative and right on.

    I considered Mexecopper, but in the end, I did not want to buy from an International company and although there seems to be a fan here, I had heard of several negative stories about them on another forum, so went with CopperSinksOnline.com. Copper sinks online was one of the best companies I have dealt with and there are many people on this forum who steered me in their direction. They are a US company that has been dealing in hand hammered copper sinks from Mexico for some time. I believe they are one of the biggest. They also have the thickest gauge copper we could find, and as it turns out that is really important. One of the other important things I found out when I was first shopping was that these sinks are all different since they are hand crafted. It's critical to go with a reputable company.

    As for cleaning, we simply use soap and water and about once a month or so we use the wax we got with the sink. If you don't wax your sink, dried toothpaste can stick to the copper, so if you do the wax, it will be no problem cleaning. We love our copper sinks!

    Good luck!

    Here is a link that might be useful: Copper Sinks 101

  • 18 years ago

    Thanks again for all the advice. I just (today) ordered my copper sink from coppersinksoneline.com. The sales rep said all their bathroom sinks are 16 gauge copper. I hope that is okay. Igloochic said that is the minimum. I hate to get the minimum but the company comes recommended from you folks and those on the kitchen forum too. The price was good too. I didn't get the faucet there....those were hugely expensive. I am going to wait to get the bowl and then shop for a faucet in person vs. online so I can be sure the color/finish matches. We are going with an ORB but they vary by manufacturer so I want to compare in person. We've been dealing with a somewhat local plumbing outfitter and so far bought all hansgrohe and Moen fixtures. We should find something to match.

    Thanks again.

  • 18 years ago

    I may be one of the people that posted on the kitchen forums, but we have lived with a few different copper sinks for some time.

    I have put a link to probably the best article I have seen that should give you more info on copper sinks than you may want. Very informative and right on.

    I considered Mexecopper, but in the end, I did not want to buy from an International company and although there seems to be a fan here, I had heard of several negative stories about them on another forum, so went with CopperSinksOnline.com. Copper sinks online was one of the best companies I have dealt with and there are many people on this forum who steered me in their direction. They are a US company that has been dealing in hand hammered copper sinks from Mexico for some time. I believe they are one of the biggest. They also have the thickest gauge copper we could find, and as it turns out that is really important. One of the other important things I found out when I was first shopping was that these sinks are all different since they are hand crafted. It's critical to go with a reputable company.

    As for cleaning, we simply use soap and water and about once a month or so we use the wax we got with the sink. If you don't wax your sink, dried toothpaste can stick to the copper, so if you do the wax, it will be no problem cleaning. We love our copper sinks!

    Good luck!

    Here is a link that might be useful: Copper Sinks 101

  • 18 years ago

    yarrow...when I said "minimum" I just meant...don't go with any higher gauge. 16 is the standard with reputable craftsmen :) You likely couldn't have found anything with a lower number (the lower the better for metal) but don't think you settled for it :) 16 is great quality.

    I personally didn't find coppersinksonline to be up to my personal standards for customer service (the sales rep wasn't helpful when I wanted details on welds). But I know someone who got a lovely sink from them. I personally wouldn't shop with anyone but mexicopper....their service was that great :) I'm sorry to hear that someone else didn't care for them. The only compaint I ever saw for them was related to speed. They make the siks for you...and take time, but I'm ok with that since I like to support the artists without the out of country middle man :)

  • 18 years ago

    A quick note on copper-- you'll see several different ways of referring to copper thickness...

    Gauge: how many layers of material it takes to make an inch-- 16 gauge takes 16 layers. 1/16th of an inch each. Not that different than 18, but lower is better, all things being equal.

    Ounce: how many ounces a square foot weighs. 16 gauge copper is around 48 ounces. Higher is better.

    Mils: each mil is 1/1000th of an inch. 16 gauge is roughly 62 mils. Obviously, higher is better here, too.

    While sinks are usually sold by 'gauge', you will see the other measurements used for copper sheeting used in countertops, etc.

  • 18 years ago

    I found one copper sink with nickle finish.
    Is it still a copper sink?
    Does anyone have any advice on it? Is it easy to care for?
    Hopefully someone can help me out here. Thanks.

    Here is a link that might be useful: the nickle finish copper sink link:

  • 18 years ago

    Well...

    {{gwi:1457858}}

    It has a copper core, but part of the appeal for the copper sink fan is the way copper matures and changes over time. This is essentially a nickel sink that happens to be copper inside. If I were you, I'd start a new thread with 'Nickel Sink' in the subject, it's more likely to attract the attention of someone who can advise you.

    I know there's some household chemicals that react badly with nickle, and I'm sure they'd affect a sink the same way. While some nickle faucets have a durable coating that resists corosion and waterspotting, I don't see anything about that regarding the sink.

    It's a unique and beautiful look, though.

  • 18 years ago

    Thanks Oruboris.
    Yes, corrosion and waterspotting are my concern.
    I will start a new thread with "Nickle Sink".

  • PRO
    17 years ago

    There is an informational site about copper sinks. I have included a link. They do not sell anything, just give information. With regard to nickel plating, be aware that plating will eventually wear off with use.

    Here is a link that might be useful: About copper sinks

  • 17 years ago

    drachiele,

    ...it is quite clear that you are associated with Rachiele copper sinks - your name sort of gives that away along with the fact that the the "informational site" you are promoting is in fact associated with your website... Nice try. Please read the rules here on this forum pertaining to business use.

  • PRO
    17 years ago

    The informational site is just that! There are no links to any other site selling product and if a consumer asks for a reference, we do not give one. We are occasionally asked to refer a sink company and we refuse, only suggesting that the consumer read as much as they can prior to purchasing. I could have signed on using an alias, but have no concern about the fact that the informational site is purely informational and factual. We have done our research and I would challenge anyone to find any information that is not factual on that site. The aboutcoppersinks.org site is a collaboration with other companies, all interested in making sure that consumers do not end up with copper in their homes with lead or other poisonous substances in the product.

    You are quite off base with regard to the site being associated with my manufacturing site. There are no references nor any links. Our goal is purely to educate the consumer. That clearly is not against the rules of this forum. Had we had other motives, there would be a reference or a link on the page to move consumers to our site. Nice try!

  • 17 years ago

    LOL - your "informational site" is completely unbiased? hmmm...

    ...and yes, you do have a link to an email address that is to your company for those "seeking more information". Having corresponded with you in the past when I was looking for a sink, I can publicly say that yes, you do in fact point those email inquiries to your company's products... ...nice try... :-)

    You can justify your postings here however you like, but the rules are still very clear, and your site is very much oriented to promoting your company's products.

  • 17 years ago

    Does anyone know anything about this company, Mysinksand
    faucets, I want to order two copper sinks for my kitchen
    from them. The sinks are 16gauge and copper welded.

  • 17 years ago

    dize06,

    Having lived with copper sinks in the kitchen for 2 years + and having done a ton of research prior to these purchases, I can tell you that the biggest concerns are quality and thickness. These are artisan crafted sinks and no two are exactly alike. ...trying to compare one brand against the other without all the facts is difficult.

    There is a huge difference between a sink that is 16 gauge and a thicker 14 gauge. We actually looked at a few that were 16 gauge and ordered one (and returned it). When we got the heavier 14 gauge sinks from Copper Sinks Online, we were amazed at how much heavier they were (we have several - a farmhouse and prep in the kitchen). It seemed they were twice as heavy and built like a tank. These sinks will outlast me for sure. Why is this important? Copper is a soft metal and easily dented. I could push the bottom down on the lighter weight sinks with no problem and wondered what pots and pans would do over time. With the heavier sink we bought, there is a little flex but it is exponentially stronger than the lighter weight sinks. ...yet the pricing was either the same or maybe a touch more. A much better value IMHO.

    There have been many discussions on copper sinks on the kitchen forum, but couldn't find them using the search... However the net of it is that several other forum participants have also had the same feedback and there have been many happy customers of coppersinksonline.com so be sure to check them out. I'm not sure if they still have it available, but I know for a while they were offering and additional 10% off if you bought a faucet. We bought our faucets from them and they are high quality, look great with the sinks and have performed flawlessly.

    Good luck!