Software
Houzz Logo Print
tkme4ard

they forgot the 20 year warenty layer

16 years ago

we closed on the house 2 months ago. Our paperwork said that we have the 20 year warenty, we paid for it. What we didn't realize this whole time? was that the difference between the 10 year and the 20 year was the extra layer of product. We only have the 10 year standard product which is a layer of black against the foundation. They didn't give us the information until we closed, we thought it was just like an extended warenty on a car. When we closed we didn't look at thi that closely. They are building a house down the street and they have the extra layer. We noticed it and looked up our own warenties trying to figure out what it was, and why we didn't have it. So now that we know (we were at the home site every single day and its not there) what do we do? Do we ask them to dig the entire perimeter of the house and put it on? The entire yard will be torn up along with everything I've planted. I've called them today and they are having someone come out on monday to verify that they did not put the layer on. Do I contact a real estate attorney now or wait to see what they have to say?

black layer

http://smg.photobucket.com/albums/v251/tkme4ard/?action=view&current=19467_271552347986_577007986_336412.jpg

you can see here that there is no 2nd over layer

http://smg.photobucket.com/albums/v251/tkme4ard/?action=view&current=march2010135.jpg

Comments (45)

  • 16 years ago

    You are missing the black layer and thats your concern?
    Can you dig 2-3 feet in one corner and verify it is missing?

  • 16 years ago

    Maybe its just me, but I could not access your photos.

  • 16 years ago

    You need to find out what the layers are. The first layer could be a thin dampproofing coating or a thicker waterproofing coating; both are likely to be black but the dampproofing is not thick enough or elastic enough to bridge cracks and it can slowly deteriorate.

    The second layer could be a vertical drain mat or some kind of rigid insulation board or a combination product that serves both functions. I doubt that a waterproofing system would require two coats.

    Your contract should include a specification that describes the materials in detail including brand names.

    Is there a drainage pipe at the footing level? If so, to where does it drain?

    If there are older houses built by the same builder with both of these systems you might be able to find out how they have performed.

  • 16 years ago

    the house thats being build down the road has a layer that is in the pamplet that the 20 year warranty shows. Ours does not. Its blue with writing on it that almost looks like styrofoam. This is part of 2 part system that is the 20 year warranty that helps wick away the moisture. The standard 10 year warranty only has the black damp proofing. That is on the house.

    trying again with the pics

  • 16 years ago

    You need to determine exactly what the black material is and what the blue material is and whether the first layer is the same for the two systems. You also need to determine the nature of the soil and the probability of underground water or at least tell us what the climate is. Also determine what the warranty says; is it for water penetration and is it pro-rated over the warranty period and what remedy is specified, labor as well as material, etc.? No one can accurately compare two systems if they don't know what they are.

  • 16 years ago

    the blue layer is in the pamplet saying what is part of the 20 year warranty. We don't have it. We're in OH. The booklet clearly states that the black layer is standard and the (light) blue outer layer is the extra membrane added to take moisture away from the black layer as an extra barrier. I'll have dh get the pamplet out and post the name /website info.

  • 16 years ago

    The black coating shown in the 2nd photo is a spray-on damproofing. We see it all the time here.

    The blue foam you describe with writing on it that looks like fom insulation is just that: foam insulation.

    While it may provide some additional water and damproofing abilities, it may be required to be installed on your foundation to meet your energy code requirements in Ohio.

    Is the ceiling of your basement insulated?

    If so, then the best you can hope for from this builder is your money back on the foam that wasn't installed.

  • 16 years ago

    no the ceiling is not insulated. Its not for code in ohio, but it is part of the warranty that we bought.

  • 16 years ago

    In Ohio, either the basement ceiling must be insulated or the basement walls must be insulated to meet state energy code requirements.

    If this blue foam board on the foundation exterior was meant to serve as the basement insulation in addition to providing added damproofing of the foundation, then it is required to be there and the building should not have passed inspection or have been issued a certificate of occupancy without it.

    It therefore becomes not only a warranty issue, but also a code compliance issue if there is no other basement insulation in your house, and you need to contact your municipal code inspection office to ask why this foam insulation board is not there.

  • 16 years ago

    the inside of the basement has insulation from half way up. We have the energy star booklet that our home passed/exceeded the energy rating. Does that make it compliant?

  • 16 years ago

    tkme4ard, you need to forget the warranty for a moment and concentrate on whether or not your house was built properly. This needs to be done within the first year of ownership.

    In a new Ohio residence, if the first floor is not insulated, a concrete basement foundation wall would normally be covered by at least an inch of the blue stuff (extruded polystyrene foam insulation, aka Dow Styrofoam) or, if there is no insulation on the inside of the basement wall, 2" of that insulation board. Of course, the insulation could also be pink (Owens Corning's version).

    As for the black layer, from the photo I cannot tell if it is light duty bituminous "dampproofing" or heavier duty, more elastic, rubberized bitiminous "waterproofing".

    The builder must have given you a specification stating what was included in the contract. Find it and post it.

    As for code compliance in Ohio, the 2006 IECC requires that a certificate be posted on the main electrical distribution panel listing the R-values of all of the insulation installed for the thermal building envelope as well as the thermal performance of the windows, HVAC equip. and the water heater. Take a photo of it and post it here. The building department should also have a formal report from the builder showing how the building meets the 2006 IECC for residences and that information is available to the public upon request.

  • 16 years ago

    I just saw your most recent post. An Energy Star rating is nice but it is based on other standards.

    I believe the IECC allows only half of the required basement insulation to be on the inside of a "mass" wall. Perhaps the building official doesn't consider this to be a mass wall.

    What kind of insulation is on the inside of the basement wall and how is it installed? Be more specific or take a photo.

  • 16 years ago

    I checked the IECC and the prescriptive table (without software trade-offs) allows a basement wall to have R-13 cavity insulation (ie, not continuous) on the inside of the wall and nothing on the outside. If it is continuous (foam board) it can be R-10 but must be covered with drywall, etc.

    So, your installation probably meets the building code except that basement wall insulation should extend from the top of the wall to 10 ft below exterior grade or to the top of the basement floor whichever is less (ie, full height of wall must be insulated). Your builder appears to be cutting every corner possible and then some.

  • 16 years ago

    I agree with that, how do we know whats supposed to be there, if it passed inspection? This is beyond frustrating. We have no clue whats supposed to be right and whats not. Can you tell me exactly what you want pictures of?

    thanks
    Angela

  • 16 years ago

    A photo of the interior would help if the insulation is visible.

    Also get a photo of the cover of the electrical panel showing the certificate of energy compliance.

    You need to find out what the black foundation coating is by its proper technical name. Modified/rubberized asphalt/bitumen is waterproofing. Asphalt mastic is dampproofing. Dampproofing does little or nothing to keep water out of your basement.

    Also find out if there was a drainage pipe installed at the bottom of the footing.

    This should all be specified in the contract documents unless you bought a "pig in a poke", as they say in Copenhagen.

  • 16 years ago

    By the way, an inspection by a building official does not necessarily mean the building meets the building code; it only means the inspector didn't notice any violations worth writing up and issued a certificate of occupancy. That certificate does not mean that the building official checked to see that the non-code-restricted elements of the building were built according to the contract documents. A building official has no obligation or duty to you, only to the city and he is protected by the city from responsibility for his mistakes.

    If you want quality control and assurance on your project you can either trust the builder to do it in spite of the obvious potential conflict of interest or you can hire someone to review the work as it progresses and inspect the project before you accept it.

    Don't expect a builder to tell you that you need this protection or to be happy about you having such an agent. The cost is usually worth it because fixing deficiencies after the work is completed is a very difficult and expensive task and the owner is usually on the hook for the majority of it if the contractor/developer wrote the contract documents.

  • 16 years ago

    "A building official has no obligation or duty to you, only to the city and he is protected by the city from responsibility for his mistakes."

    Not entirely true.

    More and more municipalities rely on private 3rd party Code Inspection agencies to provide inspection services for them.

    It cuts costs to the muncipality, especially since there continues to be a shortage of certified code inspectors nationwide.

    Because of that, inspectors for 3rd party code inspection companies and their agencies can be and are held personally and severally liable for damages caused in either failing to note code deficiencies or in allowing code deficiencies to stand.

    Inspectors and their companies can be sued directly by owners, and in fact are sued by owners all the time.

    So don't think just because something was missed on a Code Inspection you have no ability to sue for damages. You do.

    You can even sue a municipality and their own employed code inspectors for damages wrought by negligent inspectors.

    Nothing in any law protects a muncipality or its employees from being held liable for damages inflicted on any of its citizens...

    And lawsuits against municipalities also happen all the time...

    So do check to see if the building was properly inspected and a certificate of occupancy issued.

    If it was and your building does not meet code minimums, you can sue the muncipality and its inspectors to make it right.

  • 16 years ago

    By the way.

    Basement foundation walls are not considered 'mass walls' under the IECC*(see note)...and continuous insulation can be placed on the interior or exterior of the foundation wall. Minimum is R-10 continuous for your region.

    But basement wall insulation cannot just be applied from 1/2 way up.

    402.2.6 "Basement Walls" of the 2006 IECC requires that insulation for basement walls associated with conditioned or non conditioned space extend from the top of the foundation to a depth of 10 feet or the basement floor whichever is less.

    That said, it appears that the insulation that is currently on your interior basement walls does not meet Code minimum, and needs to either be extended from the top of the foundation to the basement floor on the interior, or foam insulation on the exterior must supplement what you have now.

    Either way: You have warranty and Code issues and are due back some money from the builder and maybe even the municipality.

    ----------
    *Unless it is an 'above grade' basement wall.

  • 16 years ago

    Regarding municipal liability:
    This project is in Ohio, not PA, so the building inspectors work for the city, not the homeowner. Under Ohio law (and most other states) there is no duty of enforcement by a building department of an ordinance or code so no lawsuit by a homeowner would be successful.

    Here is just one resolution to such a lawsuit:
    "In considering the city's summary judgment motion, the district court stated the issue as "whether a municipality, which has enacted ordinances setting out a program of building inspection, is liable to a private citizen for damages arising from the municipality's failure to comply with the ordinances." Noting there was no Ohio case law on point, the district court, in its unpublished opinion, examined the law in other states and concluded that Ohio courts would impose no duty or liability on the city defendants. The court based its holding on the public duty/special duty principle that, absent a special relationship creating a municipal duty to exercise care for the benefit of a particular class of individuals, no liability may be imposed upon a municipality for failure to enforce a statute or regulation."

    Regarding basement wall insulation, you said exactly what I said like some kind of parrot.

  • 16 years ago

    Angela, what I have been trying to explain in spite of the distractions, is that the issue here is not building codes, energy codes, building inspectors, or warranties; it's basement waterproofing. You need to discover what was promised and what was provided. I can't do that for you and the photos and vague descriptions aren't helpful. Guessing would only confuse the issues. All of the necessary information should be available from your builder so that's the place to start, then come back and see if someone can help you.

  • 16 years ago

    you all are confusing me :) I'll ask the guy that is coming tomorrow more information but what are specific questions I should ask? What do you all need answered?

  • 16 years ago

    Find out specifically what is actually on the outside of the foundation wall in terms of dampproofing/waterproofing, protection/drainage mat, insulation, and footing drain.

    Also find out what your contract said was supposed to be there.

    Then we can advise you about what, if anything, needs to be done.

  • 16 years ago

    "Also find out if there was a drainage pipe installed at the bottom of the footing."

    I'm seeing drain pipe coming down from those window wells.
    They look to be going down quite a ways, you'd think into foundation drainage. That would indicate they terminate into perimeter drains. (We aren't allowed to do that anymore...must have two separate systems, foundation/perimeter drains and rain drains.)

  • 16 years ago

    It's all rain water, why would it matter?

  • 16 years ago

    Our perimeter drains go into the sewer system to be treated before release...for some reason*.

    Prior, you could tap your rain drains into that but now your raingoods must go into a separate layout, right on top of the perimeter system, that goes to the storm drains.

    Too much water into the treatment plant.

    *I think its because of historical mining of coal that they treat the perimeter drain water. We get all kinds of water here and do all kinds of things to clean it before it goes to sea or aquifer.

    Sorry for the swerve, I am interested in the outcome of the OP's issues.

  • 16 years ago

    Everywhere I have worked no drainage water was allowed in a sewer or septic system.

  • 16 years ago

    ok the guy isn't coming till tomorrow at 9 a.m. We're having moisture problems in the basement (I posted in the basement forum) that we keep getting told is normal, we also need to have a landscaper come in and back fill around the house so the house is at the right grade. Gah

  • 16 years ago

    We're having moisture problems in the basement (I posted in the basement forum) that we keep getting told is normal,

    In this day and age any moisture problems in a basement are not normal. I don't care what special kind of circumstances may present, the technology to circumvent the issue is available.

    The question is does your contractor know bout it or even care enough to use it. The next question is do you want to pay the money to do it right. Often we spend way more time researching granite than we do the buried stuff.

    I can tell you the buried stuff is way more important and way more expensive to fix that granite.

    You should use the time between now and 9am tomorrow to get a bit more familiar with the issue. Google can be your friend.

  • 16 years ago

    metaxa this is so frustrating for someone like myself and my dh. He's a finance guy, not a house builder. My a stay at home mom. We don't know what to look for. We trusted in our builder to be doing the right things. I've asked several 'professionals' and they say its normal. The grade of the house is off, its settled around the foundation and water is going in right next to the house. I KNOW that this is contributing to our problem. Heck even the post I put in the basement forum has someone saying its normal. Our builder is aware of the mold and they said that they refuse to cover anything since we were suggested when we closed on the house to put a dehumidifier in the basement. We thought the 20 year dry basement warranty WAS taking care of the stuff burried.

  • 16 years ago

    Gotcha.

    But...a dehumidifier is part of the technology available to mitigate damp basements, right? You need a competent HVAC person to install a proper one, plumbed to a drain. Those portable units get to be like visiting relatives fast. Great at first but they wear thin after a while.

    Do the moisture test mentioned above, a square of poly about 12x12 and tape it down, all around the edges, no gaps.
    Best to use the red tape used to seam seal housewrap, next is the grey stuff, duck tape. Packing tape will do. Maybe. Seal it tho, no wrinkles.

    All the questions you need answered are in the posts above. These guys don't give out bad advice. They may not have all the info they need from you but the advice given above is good stuff.

    If you have water in the basement, contractor's job to fix. If you have humidity in the basement...that is up to you. You fix that with ventilation, de-humidification and insulation.

    The only real thing you need to go to the wall on is if you paid for material and installation for this 20 year warranty stuff that you did not get.

    With all the homes surrounding you dry and your builder seemingly still responding I'm sure if you grade outside properly, run your rain goods properly, de-humidify properly and insulate properly you will be fine with a livable basement space.

    Its not a large problem.

  • 16 years ago

    The precautions to take for a dry basement are simple.

    Water will try to enter the basement from the earth so the first order of defense is to keep rain water away from the foundation by proper grading and placement of downspouts. In my experience failure to do this is the cause of most basement moisture problems.

    The second order of defense is to install a membrane on all surfaces of the basement that are in contact with the earth. On a wall it is called "waterproofing" (not "dampproofing") and it should be thick and flexible enough to bridge over small concrete cracks. The most common and perhaps the best type is spray-applied cold modified bitumen (rubberized asphalt). On the bottom of the floor slab the membrane is called a vapor retarder/barrier. It is not waterproofing but it will prevent moisture from rising through the slab. There should also be a layer of crushed stone under the slab to prevent water from rising by capillary action to the bottom of the slab. To avoid moisture problems with adhered flooring, a damp sand bed should not be used over the vapor retarder under the slab.

    Other helpful precautions are protection boards that cover the wall waterproofing so that rocks in poorly graded backfill don't damage it. This layer can also be a drainage mat that helps direct water downward to a footing drain that should run by gravity to daylight or a sump pump. This layer can also be insulation which keeps the wall warmer so less moisture condenses on it on the inside. Commonly used boards that provide all three functions are made of dense rigid fiberglass or grooved polystyrene foam.

    Where water under the slab is a serious issue, interior drains can be installed under the slab and run to daylight or a sump pump. Sometimes a crushed stone layer is adequate to bring water to the pump. But there should always be an exterior perimeter footing drain.

    A perimeter footing drain should be set in gravel and covered with a geotechnical filter fabric to keep it from filling up with sediment. It should be set below the level of the floor slab. It's primary job is to reduce any hydrostatic water pressure on all underground faces of the basement.

    A sump pump should be on a separate circuit with a signal light visible at the top of the basement stairs and/or an alarm.

  • 16 years ago

    ok the 20 year, is not there and verified. The black layer is just tar according to the guy, there is a drain tile/pipe system.

    The guy said "well they may still cover it with the 20 year warranty even without that layer cause you certainly don't want to dig out your house just for that membrane" Our contract says this

    upgrade foundation
    waterproofing 20 year transferable warranty cost 1455.00

    stormblock waterproofing plus warranted water protection system for below grade foundations

    from google
    http://www.trademarkia.com/storm-block-76656691.html

    http://www.moran-inc.com/stormblock.htm

    he also made comments last time here was here that home inspectors get their license out of a magazine and I shouldn't google for answers because that gets you know where.

  • 16 years ago

    ok it wasn't on the basement peoples paperwork to do, so it was the builders supervisor or paperwork at fault for not getting done. BUT it was paid for on our end, but not to the basement folks. The basement guy said as of right now we have a 10 year warranty because they were not paid the difference. They would be willing to extend the warranty without the blue layer but they would need compensation.

  • 16 years ago

    tell me what you think of this 'solution' if they will do it or not is a whole nother ball game.
    When the countertop people dropped the counter top on the floor and scratched the linolium Inverness the builder had them pay me a check to replace the entire floor because it couldn't be guarenteed to match. So based on that this is my plan.

    Have them figure out how much it would be to dig out the house and put the blue layer on and give us a check in that amount. THEN we take that money and extend the waranty to 20 years which the storm block people said that they would do through us and without the blue layer being installed. We have the house backfilled and the grade redone, and have drainage pipes on all downspouts and burried to take the water away from the house. Also having the basement wall insulation going to the floor (vs the half way up it is now)

    What do you all think of that?

    if not then please list what you think should happen

  • 16 years ago

    The person you are talking to is either inexperienced or unusually sloppy in his approach to technical construction issues (perhaps both), as if you needed another obstacle to a resolution of this issue.

    Coal tar would not be a good choice for basement waterproofing even if it were not a carcinogen. It is far too brittle to be used below grade; it needs to be exposed to the sun in a warm climate.

    The "waterproofing system" you paid for consists of:
    1) A "heavily modified elastomeric membrane" (this is the commonly used modified/rubberized asphalt material I mentioned earlier, so it sounds fine)
    The company says the membrane has permanent elasticity to bridge cracks in the foundation walls and that's good. It also says it will not lose any of its characteristics even after years of constant water immersion (asphalt based dampproofing will not last long; I don't know why they ever bother to apply it)

    2) The company puts insulated drainage panels over the membrane in order to protect the waterproofing membrane, insulate the foundation walls, and drain water [down and] away from the surface of the wall.

    I don't know if the panels are rigid fiberglass or extruded polystyrene but the blue color you mentioned earlier suggests Dow's Styrofoam brand of extruded polystyrene.

    This is the standard waterproofing system I have seen used for homes for the past 25 years. I guess we are left to assume that the "tar" on your walls is the same modified/rubberized asphalt and that the protection/insulation/drainage board was omitted by mistake. You should verify this assumption and make them use the proper terms.

    I guess you can ask for compensation from the GC for the loss of the board or demand that the wall be exposed and the layer added. My fear about exposing the wall is that a machine might damage the waterproofing and it would be difficult to get it clean enough to repair it.

    The fact that the waterproofing company does not owe you the longer warranty does not relieve he GC of a contract obligation to provide it to you some other way. Therefore the least he can do is pay for the additional warranty and perhaps refund at least part of the upcharge you paid because it was not only for the added warranty but for a better, more reliable system that is more likely to not need to be repaired under warranty.

    I still think the basement moisture is from poor grading, downspout discharge, and window well drainage. None of that would be affected by the waterproofing system.

    I also suspect that the board provided the code required insulation to the slab level so the GC probably owes you more insulation on the interior of the basement wall.

    It's good to know the waterproofing is good and there is a footing drain. That's more important than the board. I dont know why the window wells weren't drained into that system.

  • 16 years ago

    Asking for a check for adding the protection board is so expensive it will be disputed by the GC. You need to first read the contract and see how disputes are resolved. Does it involve arbitration, mediation or court?

    Once lawyers are involved it will take a long time and a lot of money to arrive at a settlement. Start communicating with the GC in writing because everything that wasn't written will soon be pretty much useless.

  • 16 years ago

    so what would be a solution that the builder will do that is agreeable? have them extend the warranty to the basement people and have them pay us the amount owed for the upgrade (1455)

  • 16 years ago

    I would first make it clear that they failed to meet the terms of the contract and because of their error you have less protection for your basement. Then I would ask them how they intend to make you whole or compensate you for the harm they have caused you. Whatever they offer, say it isn't enough (because it won't be). You want their offer as evidence that they acknowledge their error.

    What you want and deserve is to have the protection board installed and the warranty increased at no cost to you since that is what you contracted for and what you paid for.

    Alternatively, if you are in a generous mood or just want to get it over with, you could settle for the increased warranty (that you've already paid for) and a reasonable cash settlement for the lost protection value of the board. They might argue that they only owe you one or the other but, in fact, they denied you both.

    But first I would want to get the moisture problem solved to be sure the existing waterproofing and drains are working properly. Remember, the waterproofing warranty should become active after the GC's one year warranty expires. Right now the GC is first in line for responsibility to you for the moisture problem and the waterproofer should be responsible to him rather than to you.

  • 16 years ago

    Poor moisture control in a basement is critical for livability and for maintaining the value of a home in today's tough market. A bad job could cost the owner many times more than the original system cost so why would the GC even offer a lesser version?

    There should only be one option offered and it should be a good one. IMHO the GC caused this problem through a poor understanding of good design and marketing.

    Having said that, I should add that the board is only really necessary in three conditions:
    1) poor backfill containing rocks (protection)
    2) clay or other poorly draining backfill (drainage)
    3) a very cold climate where continuous exterior insulation is important (insulation)

    However, I prefer using 2" Styrofoam on the outside of the wall because it solves the common problem of interior furring and insulation contributing to mold. Avoiding mold problems is another even more complex subject. The ultimate solution is to install an inch or two of closed-cell spray-on polyurethane foam insulation covered with drywall. You should see if the GC will go for that.

  • 16 years ago

    this is what my dh just emailed back

    Make them dig up the yard, put in the required board and verification of the drainage both at the bottom of the footings and the wells. Also fix the wells with the correct depth of rock and correct rock which I made a print out of. Then do the correct sloping of the yard and drainage locations based on plan requirements. This is not a simple mistake (scratching of the tile), this is a structural issue and needs to be fixed and is a fraud issue. They knew when they didnÂt pay the sub-vendor for the work. It also might be required by the VA loan guarantee for them to fix.

  • 16 years ago

    the top layer of dirt is nothing but clay, we saw dark black soil when they dug but the top is clay

  • 16 years ago

    I wouldn't use words like fraud and structural unless I knew for sure they were accurate. I'm not yet aware of a reason to think this is anything other than a mistake due to poor communication between the GC and his waterproofing sub. Don't make the situation any more difficult than it already is.

    Exposing the foundation wall and applying the board is not as easy as you might think. It must be done with a backhoe and the bucket might damage the membrane so a lot of hand work might be required. It would also disturb the drainage pipe or the drainage fill surrounding it. You would need assurances that it could be done without damage or you would have defeated the purpose of adding the board. Repairing a damaged spot would require cleaning the membrane which is also difficult to do effectively. This is a matter to be discussed with the GC, his excavator, and his waterproofer or better yet, an independent consultant.

    Eventually someone with enough experience and knowledge will need to determine whether the board is actually necessary given the site conditions. Then a reasonable settlement can occur. Fights just cost everyone money except the lawyers.

  • 16 years ago

    The VA is likely to hold you responsible rather than the contractor if they care at all and I doubt they do.

    I've told you everything I know about the issue and don't have any interest in an owner-contractor squabble. Good luck with it.

  • 16 years ago

    Macy I thank you, and I agree with you. My dh is just mad more than anything and wants them to fix it at what ever cost, not looking at the big picture. I will send him on the information you provided.

  • 16 years ago

    tkme4ard, you actually want a layer of clay at final grade, right up against the foundation and running out 2 or 3 feet. Properly sloped away from the home's foundation and into the landscaping, it works to remove water from the immediate area of the ground to foundation "joint" for lack of a better word. Clay is way more water resistant than fill soil or garden soil, no matter how any of them are graded,

    You can top that with mulch or river rock or your choice of permeable material and then place your foundation plantings in front of it...say two feet out from the home.

    You don't plant into it, close to the foundation.

    As the foundation plantings mature, you begin to not even see the strip.

    We get rain starting in October and it seems to not stop until June. Temperate rain forest is how my area is described. Demand the clay layer be replaced at completion.

    One of my first homes, years ago, bought for rental needed the perimeter drains replaced. This was a 1,200 sq ft raised ranch. I dug it by hand, took me two weeks and cost me the cost of pipe. All four sides, four to five feet down.

    Last year we had another one, hired a contractor, he did it in 4 days and it cost slightly under $15,000. This was a fully buried basement so deeper, they tore everything out, wire brushed the concrete, sprayed the black goop (hey! I didn't do it or I'd know the name), dimple screened it, put in proper perimeter and rain drains, wrapped and drain rocked and filled it, clayed it and graded it. That price includes all new rain goods all around the house as well and its a bit larger home.

    Looks just like the one I did by hand for probably $300.

    Just a bed time story for your hubby.

    Mavc is giving you good advice, btw.