Kas - I would dearly love to help you in payment for all the helpful advice you so generously keep flowing. Unfortunately I haven't a clue about these appliances though ... :(

If you are not lining up the drawer fronts across all the cabinets in a run, you won't have a problem. If the fridge you are considering is a panel-ready drawer unit, look at the respective height of the drawers since this is the one thing that cannot be adjusted. In a two drawer fridge, the higher of the two panels will have to overhang (downwards) in order to line up with other panels next to it, and this overhang will eliminate height in the lower drawer, which might cause a significant loss of useable volume.

I once did measure Perlick drawers inside. (can't find those notes now.) The inside dimensions were reasonable.

I'm certain Perlick will respond to an email asking for the length of the glides and the distance that they protrude when pulled out fully.

If Perlick don't have the information, I'm sure one of the major appliance stores can help you.

Like Aliris, I wish I could help you.

Heh. Thanks for responding. I guess the legion of Perlick owners aren't hanging around the forum at present. I'll try to find some examples locally to measure, and follow-up as required with the suggestion to contact Perlick for the data that they failed to include in their Design Guide drawings.

kas