Software
Houzz Logo Print
kucinaclassica

Capital Products

15 years ago

Are people paying MAP for their Capital Ranges?

For example, the CGMR366 in the Culinarian line has a dealer price of $3,990, but a MAP of $5,490. Any discounts to be had?

I know Eurostoves sells for MAP.

KC.

Comments (22)

  • PRO
    15 years ago

    Slight correction to the pricing above... Eurostoves price for the 36" 6 Burner Manual Clean is $5320

  • 15 years ago

    If you buy local you have to pay sales tax plus local delivery.

    If you buy out of state you have to pay freight.

    AJ Madison has the CGMR366 for $5320 with free delivery.

    I take it that will be the standard industry price.

    Not alot of room to pay for freight and some profit.

    Unless you live in state with no sales tax and have a local Capital dealer the best price will be $5320 IMO.

    My local sales tax is %9.75 :(


    BTW Yes I know that you are supposed to report out of state purchases on your state income tax report and pay sales tax on that. 99% of people don't do that.

  • 15 years ago

    Trevor, sorry for the error. So is Eurostoves selling slightly below MAP?

    I guess these markups are industry standard, but somehow in the age of the internet, these markups are a little hard to swallow.

  • 15 years ago

    Kucinaclassica,

    What do you think is a fair price to pay for the CGMR366?

    What is a fair price for freight?

  • PRO
    15 years ago

    Eurostoves does not ADVERTISE a price therefor does not sell slightly below MAP, Eurostoves sells at the MSRP as guided by the Manufacturer.

  • 15 years ago

    Deeageaux,

    I think it can be had for dealer pricing if you search diligently for a cooperative distributor... :) The price on freight depends on your distance from that cooperative distributor... :)

    Trevor, so the minimum advertised price is below MSRP? This whole MAP thing seems like price fixing to me.

  • 15 years ago

    This whole MAP thing seems like price fixing to me.

    Legally, price fixing is when two or more manufacturers agree to sell similar products at a given price.

    So the plan is to call the six capital distributors and see if they will break their agreement with Capital and their dealers and sell direct to an end consumer?

    That sounds unethical on the part of the distrutor and actionable by Capital and the dealers.

    I don't see the upside for said distrutor. One sell is too little money made and many sales you are bound to get caught.

  • 15 years ago

    Deeageaux, no, not exactly. It is to call six Capital distributors to see if any will sell below their advertised price, which they are legally allowed to do. Capital cannot require it's distributors to sell at the advertised price.

    There is an interesting discussion about MAP here:
    http://community2.business.gov/t5/Other-Business-Issues/Legal-Advice-on-MAP-Pricing/m-p/4996/highlight/true

    The problem most consumers have is that they do not know distributor cost, so do not have much bargaining power.

    KC

  • 15 years ago

    Deeageaux, no, not exactly. It is to call six Capital distributors to see if any will sell below their advertised price, which they are legally allowed to do. Capital cannot require it's distributors to sell at the advertised price.

    By contract, the distributors can not sell directly to retail customers. They sell to dealers.

    Capital cannot legally require them to sell at MAP or MSRP or whatever but they can release them from their distributorship.

  • 15 years ago

    kucinaclassica - How did you find out the dealer cost for the CGMR366?

    We got the 30" manual clean culinarian (CGMR304) about 5% below MAP from our local dealer but had to pay sales tax. He also threw in the wok ring at about a dollar over cost.

    Do you know dealer pricing on that model?

    We went in armed with price quotes from out of state sellers and negotiated based upon a price after sales tax. Our delivery is to our kitchen which is up a half flight of stairs. Other seller's free or basic delivery only got it to our garage with "white glove" delivery being extra.

    Our overall deal ended up being slightly cheaper than it would cost to buy from out of state.

    If we had known the dealer cost, we'd have been in a slightly stronger position. I do prefer to buy locally and have an interest in keeping local businesses afloat, but wouldn't mind knowing what kind of mark-up he was negotiating.

  • 15 years ago

    Robj, That model is $3160.

    And if you want to know whether you really got the wok grate for $1 over cost, that's $100.

    Deegeaux, of course they can dump distributors, but that's not really in their interest. Especially during a significant rollout of a new product like the Culinarian. They want as many people to get product into their house as possible to spread the word about their performance.

  • 15 years ago

    Hey thanks.

    Looks like the wok ring was really $25 above cost.

    I can't believe a salesperson would lie, can you?

  • 15 years ago

    Robj, Ha! No, I've never heard of a salesperson lying! :) they also never exaggerate or make unfounded claims about performance or reliability!

  • 15 years ago

    Deegeaux, of course they can dump distributors, but that's not really in their interest. Especially during a significant rollout of a new product like the Culinarian. They want as many people to get product into their house as possible to spread the word about their performance.

    Capital just dumped VAH of CA, their former distributor in CA.

    According to everybody that visits Santa Fe Springs Ca, the Capital plant is running at full speed, the Culinarian is selling itself(well maybe Trever had something to do with that LOL).

    I don't see why they would tolerate distributors deeply discounting a hot product and selling it direct to retail customers.

    I have heard of retail customers buying a full suite of luxury applainces for very large kitchens from distributors for deep discounts.

    These are almost always smaller brands with very slow selling merchandise.

    If someone can find the CGMR366 for deep discounts I would love to hear about it.

  • 15 years ago

    How much profit is earned? That's a good and very old question, I think. If not for conversations with Trevor over a year ago, I wouldn't know what I was searching for; so does he earn that much markup? I think so, yes - depending on the position I'm in. Many of us have seen our industries devastated by the excessive and short-term race for profits - but in a better year than this last one, yes. If it means getting a CC or not getting one at all, then I have to think about it.

    But its pretty clear that this guy is in large part responsible for what now appears to be the state of the art in home ranges, and is very obviously not strictly in it for the money. So my own opinion is that we need to think about where we put our money and what's worth supporting.

  • 15 years ago

    Deegeaux, why did Capital dump VAH?

    Hot selling? Perhaps, but they are not represented in most kitchen showrooms, so however well they are doing, they have a long way to go to be counted (in sales) along with the big players. I am sure that is their goal, and cutting off sales will not help.

    KC.

  • 15 years ago

    KC,

    I am not privy as to why VAH was dumped.

    But they were dumped during this "very important launch."

    You can not become one of the big players by devalueing your brand.

    Screwing over dealers is exactly the way to do devalue your brand.

    Cutting off sales that screw over dealers helps increase your brand value.

    If distributors sell direct to retail customers why would any dealer place Capital on their showroom floor? In effect they would be buying retail then marking that up. Word spreads fast in this internet age.

    Capital may not be one of the big boys but they are not one of the also rans that don't have a market diferentiator to offer.

  • 15 years ago

    Deegeaux, I don't disagree with you, however, not all of us need or want hand-holding from a local dealer.

    Consumers have become very self-sufficient -- many of us do our own research, having learned that showroom personnel are rarely knowledgeable about the products they sell.

    As a consumer, there is more information to be had through forums such as this and other review sites than a showroom salesperson can provide, whose sole motivation is to make the sale.

    I want the lowest price, period. Showrooms are of little interest to me -- I would prefer purchasing direct from the manufacturer if it were possible, basing my decision on the experience of others who have actually used and owned the equipment I am interested in purchasing.

  • 15 years ago

    I can certainly understand wanting the best deal possible, but the laws of supply and demand are still very much in place.

    If as folks who have been to the plant (and I have no reason to doubt them) say it is jumping. If sales and plant production are where the CC folks are happy and in line with their business model..There is no reason for anyone to sell below MSRP, whether it, the CC, is on showroom floors or not.

    If demand is ahead of supply prices many times go up, if a new model comes out or demand drops discounts can be had.

    Every MFG has the right to set MSRP they also have the right to enforce how closely that is adhered to. It is also the consumers right to not like the price and buy something else.

    Where one wants or needs hand holding from a local dealer is to me a moot point. It is however nice to be able to see something in person first ,if possible, before buying:-)

  • 15 years ago

    I want the lowest price, period. Showrooms are of little interest to me -- I would prefer purchasing direct from the manufacturer if it were possible

    KC,

    I hear ya,

    I would buy the Culinarian in a back alley in Santa Fe Srings under the cover of darkness from Surjit direct IF it saved me money.

    But "We" are not most people.

    Especially most people buying high end ranges.

    Alot of people are very comfortable buying something under $200 sight unseen.

    Other that some senior citizens and a few Luddites, everyone is comfortable buying something under $100 sight unseen from the internet.

    Spending $4k PLUS over the net is another ball game for the vast majority of people.

    I considered flying into Phoenix and driving a year old pre-owned car home to Los Angeles. I have purchased Swiss watches off ebay.

    Again not most people.

    I have argued from the point of view of Capital Cooking LLC.

    Wolf/Sub-Zero/LaCanche/Ago do not sell direct.

    That is how you become a discount internet brand selling on price with tight margins.

    From my point of view I want a rock bottom price.

    If all options are about the same, I am willing to pay small premium for superior customer service.

    Not a fancy showroom or a prestigious address.

    But superior CR based on a long track record.

  • 15 years ago

    Deeageaux, trust me, you don't need to hide under the cover of darkness! Deals can be had for those who press for better pricing.

    Appliance showrooms are like car dealers...expect to be lied to. Customer service and repair service promises are gimmicks, in my opinion. They can't be guaranteed by the salesperson.

    They try to ge you emotionally attached to the item, after which they've got you. They try o make you feel important that you are going toinstall brand-x in your home. They appeal to a person's baser instances!

    KC

  • 15 years ago

    There's an inherent conflict. You need to have showrooms so you can actually look and feel the items, but then the internet does come along with occasionally lower prices. I'll be honest--I have, on occasion, looked at a pricey book at the local Borders and then ordered it from Amazon with a substantial saving--plus no tax and often free shipping. I feel a little bad in that Borders has those items to look at and has to pay for rent, inventory, utilities and staffing, but then I know they do have profit centers that Amazon doesn't ($7 coffee, anyone?).

    On a big ticket item that conflict is magnified. I decided on Capital when I was on a trip to visit my family in Baton Rouge--I saw it at a local retailer there (thank you, Goodwood Hardware!) I went with Eurostoves to buy my Culinarian because there was no local retailer in my area. I'm satisfied. Could I have found it cheaper? I dunno, I guess it's possible (although I haven't seen any substantial discounts on Capital products), but I figure somebody's gonna make some money off the sale, and I'd rather it be someone who knows the product who I can b*tch at if something goes wrong.

    Contrast that with a recent dishwasher purchase. Went to a high powered appliance store, the salesperson was really aggressive and not terribly accurate. Walked out. Got the same item at Sears, at a slightly lower price, from a salesman who was very low key but quite knowledgeable. In this case, I chose to send the commission to the salesman who wasn't a jerk. Could I have bought it online? I looked into it, and when you considered shipping, etc., it really wasn't much of a premium to buy from a brick and mortar store.

    I'm shopping for a Kawai keyboard now (MP6 or MP10). The local retailer has them in a showroom for me to try, but Sweetwater has them online for about $500 less. I do feel guilty using the retailer's display models to try out, but I also feel the 'retail premium' in this case is too high. Problem is, if everyone made Internet purchases, a lot of local retailers go out of business. I patronize my nearby locally owned hardware store instead of going to Lowes or HD, and am willing to pay a little extra on each item he has there, just so I have the convenience of having a store near me.

Sponsored
Haus Studio
Average rating: 4.8 out of 5 stars28 Reviews
Franklin County's Preferred Custom Cabinetry & Design Studio