The Problem

Philips 27TS54 c101 27B800-7562 White horizontal line in the center of the screen. Color is present in the first half inch of the leftist corner of the horizontal line.

Audio is present and controllable. The green power led from a cold non plugged in state remains solid until CRT goes to ignite. A click is heard then the green power LED blinks.

I request any info or tips you might have pertaining to this problem

2/20/2008

P.S. 25"-27" CRT board APT187

Possible Answer

Posted by PEE_WEE 4/28/2005

On the CRT circuit board(picture tube), you will find R3340, which is a 10 ohm 1/3w resistor. The location of the resistor is printed on the bottom of the ckt board. It is burned open, replace with a 10 ohm 1/2w resistor. This will solve your problem. The original resistor was sized too small, should have been a 1/2 watt.

NOTE to PEE_WEE

My resistors are not numbered the same on my crt board APT187. R4330 does not exist GSM 02/20/2008

Thanks

sincerely Lightlyblazin