Converter box/VCR programming problem

18 years ago

I purchased a converter box and hooked it up to my VCR and TV per the schematic provided with the unit. Everything works fine EXCEPT when I try to program the VCR to tape programs. When doing this, the VCR menu only gives me a few of the many available channels to program in and when I program one of those, the taped output is of very poor quality. I tried having the converter box set to the channel that I want to record, but the same problems still exist. Is this because my VCR is old or is this an inherent problem with using the converter box with a VCR?

Sort by:Oldest

Comments (5)

jdbillp
18 years ago
You need to put the converter box on the desired channel and your vcr on the converter's output channel, IE either channel 3 or 4.
dlg421
Original Author
18 years ago
jdbillp,

I have that down. Its trying to program multiple programs on different channels at different times that seems to be no longer possible.
Related Professionals
Sebring Interior Designers & Decorators · Atlantic City Interior Designers & Decorators · Orangeburg Interior Designers & Decorators · College Station Interior Designers & Decorators · Elko Interior Designers & Decorators · Muncie Carpenters · Wausau Carpenters · Las Vegas Carpenters · Montréal Carpenters · Waco General Contractors · Williamsburg General Contractors · Saint Cloud General Contractors · Watertown General Contractors · Show Low General Contractors · Coos Bay General Contractors
regus_patoff
18 years ago
The converter box only has (1) output, you can only watch OR record (1) channel.

If you want to watch AND record (2) different channels, you'll need (2) converters.
regus_patoff
18 years ago
The VCR must be set to channel (3) OR (4) and remain there...

The VCR can still be programmed to record at a certain TIME, but the VCR can't be programmed to change channels on the converter box.
jowanek
17 years ago
Ok I got everything so far about the tuner and all, but how do I set my vcr to the converters output channel, channel 3 or 4? Humor me please, I go into my Vcr's program and choose the date and time to tape and when it comes to channel I put 3 or 4? Or is this something that is already set up? Confused here, Please help!