I forgot which wires connecting to the White1 and Red1 of the push button originally. There are one blue and one white wires coming from the wall. I connected the blue wire with the RED1 of the button and the white wire with the WHITE1 of the button now, yet it's not working.

I also tested the voltage before I connected them, the continuity wasn't present. Is it supposed to be very low voltage? Can it be possible that the continuity had worked for "7" years but then quit??? I hate to humanize it, but can it be possible???
Thanks

This post was edited by chueh on Sun, Feb 2, 14 at 11:26