Software
Houzz Logo Print
dreamywhite

Heat Recovery Ventilators - Are they Code Now?

17 years ago

Are HRV's code now? We are building in Wisconsin. I know you need to have fresh air intake into the house, but it is mandatory to have the HRV's now or just "suggested"?

Comments (14)

  • 17 years ago

    It is only neccessary if you have sealed the house really well with the spray foam insulation and the house can't breathe.

  • 17 years ago

    we are using the blown in blanket insulation in the walls with energy eff windows and doors. Do I need to have some kind of fresh air brought into the house or is it just suggested to do so?

  • 17 years ago

    While fresh air/makeup air/combustion air is important, noone can answer what you need (at a minimum)except your local code inforcement officer.

    HRV's/ERV's are the most efficient way to add/balance/exchange air in the home.

    The type, number, variety of appliances, exhaust fans, cooking style, fireplaces, contruction, insulation, dictates what and how much you should have. This many times goes beyond local code that desires to a see a minimum means of combustion to fresh air added.

  • 17 years ago

    What about the range hood in the kitchen and hrv's? We were planning on putting in a 600 cfm range hood that vents outside. will the hrv and the range hood work in harmony?

  • 17 years ago

    While an HRV will assistance in balancing pressures inside/outside, a 600 CFM hood is beyond standard residential units that are typically 120-250 CFM.

    Check with range hood co, about makeup air provisions, possibly built-in with accessories.

  • 17 years ago

    To my knowledge there are no state or national code requirements for a HRV/ERV.
    There is not a practical way to provide make up air for a large range hood in a residential setting. Since the use is fairly minimal it is usually ignored. Make sure the range hood has a 2 speed or variable speed fan. That way when you are doing light cooking you can run it on low.

  • 17 years ago

    "600 CFM hood is beyond standard residential units that are typically 120-250 CFM"

    Huh??? A 600 cfm hood is very much a standard residential hood! Sizing a range hood is pretty important. For each 10000 btus a range produces, the hood should be 100 cfms. A normal household range or cooktop is going to produce 45,000 to 75,000 btus EASY, meaning that I don't think ANY homeowner would be happy with a 120 cfm to 250 cfm hood. I would not want a hood less than 600 cfms (my hood is 900 cfms and does a nice job pulling all food odors out of the house).

  • 17 years ago

    Echoing what Ccoombs1 said. 600 cfms for a kitchen hood are pretty standard, and even on the low side if you have a 36" range, or a "professional style" range, much less the Wolf's or the other higher-powered ranges. Even a cheap over-the-range microwave has 300 cfms, and those barely work at all. The OP wrote on another thread that his/her range will be a GE Cafe, which in total generates 55,100 btus. Although it is unlikely that all the burners will be going full blast at once, a 600 cfm hood would be appropriate for that GE and not overkill. A couple of hamburgers in a fry pan will need every bit of those 600 cfms.

  • 17 years ago

    Ccoombs,

    Like so many people on here your not reading and interpreting.

    We were discussing HRV/ERV's and I stated residential units are not typically sold above 250 CFM for residential install. (to make up for 600 CFM hood)

  • 17 years ago

    zl700 - well count me as corrected, and thanks for clarifying (but I do think it was an understandable mistake with how you worded your sentence). Anyway, now I get what you were saying. I do think a house would have to be extremely tight to require make-up air with just a 600 cfm hood, but I also see your point from your first post that there could be many other variables.

  • 17 years ago

    No harm meant or implied here

  • 17 years ago

    Where I live, the code states that if a [new] house is connected to the electricity supply grid, a HRV must also be provided that runs during the heating season.

    A good rule of thumb is "build tight, ventilate right". If you've gone to the trouble to build tight, you'll need ventilation so why throw away heated (or cooled for that matter) air if you can recover most of the energy from it? It's a no-brainer surely.

    Paul in Montreal.

  • 17 years ago

    Paul

    Why does the HRV rule only apply during heating season? I realize that your heating season is long up there - but wouldn't you want to bring in cool freash air during summer nights? I live in the mid-Atlantic US (summers hot and humid) and am planning on an ERV and thought it would help in both summer and winter. Just curious.

    Also - I noticed on the Honeywell Vision PRO IAQ thermostat that is has the option of turning off the HRV/ERV during sleeping hours. Does anyone know the logic behind that setting.

    Also - during unually cold weather (antyhing between 0 and 20 is considered very cold where I live) does it make sense to turn the HRV/ERV off? There is something about intentionally sucking in Zero degree air into my house that bothers me and has me thinking about what will happen to my heating bill.

    BTW - I have a close firend who just finished a whole house remodel down in FL. He used spray foam insulation and was required by local code to install an ERV.

    Thanks

  • 17 years ago

    Here is my take on what probably what caused the recent Code mods in Montreal. Steady state problems when people seal their windows shut for weeks or months at a time. The houses got so airtight that humidity problems developed. Mold in walls.

    Taking evasive action (e.g. in your climate, during unually cold weather) for a few days is one thing; doing something standard for a third or a half of the year every year is a whole different ball of wax.

    Also, letting cooler night air in is an intra-day situation so every day there is a configuration change. That's not a constant buildup situation. Locking the house down in a humid subarctic climate is a recipe for respiratory illnesses.

    In Montreal, nobody needs to be told to let cool air in at night when hot humid summers occur. They do need to be told to let outside air in during the winter. A standardized code requirement for an HRV is one good way to even the playing field for buyers and builders while promoting healthy homes.

    -david