Software
Houzz Logo Print
johnax

A/C capacity vs. peak heat load

17 years ago

After an HVAC tech does a heat load calculation, how does he size the a/c? If he picks a unit that exactly matches the peak heat load it will be working balls-out just to keep up during times of peak load, with nothing in reserve, no?

Comments (5)

  • 17 years ago

    They don't use PEAK LOAD for the Manual J calc. They use a number that more approximates MEDIAN PEAK. Here in S Texas it's hitting 100, we see as much as 104, but we typically get like 96-98. They used 98 on my Manual J.
    So the system is designed for typical weather, will run more during peak loads.
    If you designed it around peak temps, it would shut off too soon in typical weather, meaning poor humidity control.

  • 17 years ago

    Humidity is seldom a problem here in the Great California Desert (i.e. Los Angeles) and also the idea of a two-stage compressor appeals to me.

    But consider my original question with an example: say total calculated heat load is 38,000 BTU and stays pretty close to that from say 3 PM to 5 PM. Contractor installs 3 ton unit. Everyone is happy.

    Homeowner takes common advice and sets back temperature to 80F when leaving in the morning. Comes home at 4 PM, turns on a/c (or has timer do it at 3 PM). a/c can only produce 36,000 BTUs at best, so house will continue to heat up for another hour. Homeowner drinks lots of beer while hanging around in his undies. Gets fat, has heart attack. Or something like that.

    What's wrong with my understanding?

  • 17 years ago

    Ha, laughing is best medicine...

    With a slightly undersized system, he needs to get the temp & humidity down to his comfort zone early-on.

    On those extra hot days, I would set it at that comfort level& forget it. On milder days he could use a set-back t-stat & have it bring the temp back down beginning an hour or more before getting home. - udarrell

    Here is a link that might be useful: Easy Ways to Save on Utility Bills

  • 17 years ago

    Thanks for the link. It's pretty easy to notice the guy is a bachelor, though. Drying clothes outside? My wife is a really nice person, but that suggestion would save a lot of money because my warm body would be sleeping in the unconditioned space called "garage". I would probably be encouraged to fold the laundry while I was out there.

    Slightly more seriously, that Forida study I mentioned in another thread said a lot of installers went for a little extra capacity just for that "keep the customer happy" reason. It's pretty obvious when the house doesn't cool down quickly enough (or can't reach our comfort temperature at all). A little extra in the electric bill is not at all obvious and if it is, the blame is harder to place. I can't comment on humidity control since we don't have that problem.

  • 17 years ago

    If humidity isn't an issue, I don't see anything wrong with oversizing. So what if it has shorter runtimes? It's not gonna get humid. You'll cool off quicker.