Software
Houzz Logo Print
bethf_gw

Miele W1918 doesn't work - ideas?

19 years ago

Hello, all you smart Miele people.

As I posted earlier, we bought a used W1918 and T1516C a few months ago, without being able to test them because the seller did not have the proper electrical hookup.

So, we finally have the laundry closet properly modified to accommodate these babies, including changing the electric to 240, and it seems that the washer does not work. The dryer powers on, but the washer doesn't. Tried switching the plugs to see if it's the outlet that doesn't work, same thing. Yes dryer, no washer.

Of course we will call a technician for the washer (we figure that even with repairs these machines are a bargain compared to new ones) but I wanted to see if there was anything we were overlooking first. Ideas?

Thanks!

Comments (2)

  • 19 years ago

    Do you have the door closed? Unless the door is closed, no LED lights will illuminate and the washer will appear dead.

    If the door is closed, do you get any of the amber LED lights illuminating? If you do, then you have power.

    To start a wash program, it's necessary have the door closed, the power button depressed, and the program selector dial in the "Start/Finish" position (the 12 o'clock position at the top of the dial) before turning the dial to the wash program and temperature position that you've chosen. Without rotating the program selector dial to the "Start/Finish" position before beginning a new wash load, nothing will happen.

    If, after performing all of the above steps, the washer still doesn't work, then you'll need Miele Service to determine what's wrong.

  • 19 years ago

    Yup, what James said! With the additional point that when it's correctly set up to choose a program it will flash at you in the 12 o'clock postion.

    I was also wondering if the child lock-out system had somehow been engaged. I've never fiddled around with it but perhaps it "kills" the machine, though I'll be switched if I know how you'd disenegage it to put things right.

    The other thing that occured to me was whether the cord from the machine was correctly attached. Do I recall that this machine was sold sans power cord and had to have one made and installed? (I could be thinking of another used 1918 purchaser, though.....) But if you did have a cord installed that would be where I'd double check as well.

    PS: Don't forget to examine all 4 incoming water filters - there's one on each end of each water line. This wouldn't affect a "dead" machine but if they have become clogged that will interfere with cycle progress once you get the thing going.

    I'm sorry you were not able to get the thing going promptly but I'm sure it can be worked out. Do you have a voltmeter electrical circuit testing thingy? That's the first thing my DH would get out to suss out where the power wasn't. I can ask him in the morning where he would be testing for this.

    Hope to hear it's getting sorted out. I'll keep an eye open for additional posts.

    MOlly~