Curved Vaulted Ceiling - Need Light Ideas

15 years ago

OK I am getting some great help in my thread on LED lights, so I now have a new struggle...

We need some ideas for lighting our great room - it has a large curved ceiling with exposed curved beams. We will have spray foam insulation that will fill the entire cavity above the beams (rafters) - and it will be sheet rocked between the beams - we can't put in recessed lights, and may have trouble with some junction boxes - so we may have to direct wire (no boxes). The space is really open so there aren't a lot of wall areas to put sconces, cove lights, or other fixtures.

Photos below:

So far one idea is to put a led strip cove light along the flat beam at the bottom of the curve.

Another is to put up a mono rail type track light like the Kovacs GK P4078 which has 8 lights and the track is 20' long. We could curve it and suspend it from the beams...

Looking for other ideas! Thanks!

Sort by:Oldest

Comments (7)

David
15 years ago
Suspended lighting bar?

Cove lighting would be really nice though.
User
15 years ago
Pity you can't leave it - the rafters and beam looks great.

Look into the "wire" track lighting fixtures like this. You could run them inconspicuously perpendicular to the beams, or along the bottom or side edge.

http://www.csnstores.com/Bruck-Lighting-High-Line-Rony-Spot-Light-BBB1237.html
Related Professionals
Paducah Interior Designers & Decorators · Vincennes Interior Designers & Decorators · Plainfield Interior Designers & Decorators · Flint Interior Designers & Decorators · Minneapolis Interior Designers & Decorators · Olean Interior Designers & Decorators · Birmingham Furniture & Accessories · Lake Charles Furniture & Accessories · Frisco Furniture & Accessories · Grand Junction Furniture & Accessories · Carbondale Kitchen & Bathroom Designers · Richmond Kitchen & Bathroom Designers · Frederick Kitchen & Bathroom Designers · Laredo Kitchen & Bathroom Designers · Marinette Kitchen & Bathroom Designers
montel (CA US 10b/Sunset 16)
Original Author
15 years ago
So far here is what we are thinking:

Use the Kovacs GK P4078 mono-rail track which has 8 lights and is 20ft long - Running it across the beams at some level.

Use 2 uplight sconces on the right and left walls at about 9ft high (left wall is in the pic above).

Some cove or spot lighting at the bottom of the beams highlighting the ceiling curve. I think that would do it. See below for sketch on photo...
David
15 years ago
How about cove lighting on the other side too for symmetry?
montel (CA US 10b/Sunset 16)
Original Author
15 years ago
davidtay - That is an good idea - hadn't thought of it! Will look at it - of course costs go up again...

Was looking at the LED Strip Lights in roll form that are like $114 a reel (5 meter) is that the best option for cove lights like this do you think?
David
15 years ago
LED strip lights that come in a roll are typically low voltage DC.

Some may not be bright enough to provide sufficient indirect lighting. The more powerful strips will need to dissipate heat through the the PCB they're attached to. That in turn means that the PCB becomes less flexible and potentially more fragile.

In addition, you'll need extensive wiring, multiple power supplies and planning - to account for line current loss and voltage drop. All of which will need to meet electrical code.

If I were to do it, I'd go with the Philips Powercore lighting system which uses AC power instead and is probably more practical for large scale deployment in homes.

Here is a link that might be useful: PowerCore lighting
David
15 years ago
Most current link included

Here is a link that might be useful: ewcovemxpc