Software
Houzz Logo Print
dalepres

Kitchen Cabinet Plans to Build

15 years ago

I've been looking for cabinets for 3 months and can't find the right thing. I'm ready to give up and build them myself.

Does anyone know of available plans to buy that are good, or a program to generate them? I don't really want to spend months learning and working with a software package.

I thought that cabinet plans would really be pretty simple to find but apparently I was wrong. Afterall, a cabinet is a box with a frame and a door; perhaps a drawer. Getting the measurements is just time consuming. But I sure thought I could find plans for all the common size kitchen cabinets.

I can fairly easily (disregarding the repetitive time required) draw up plans but there are a lot of hard earned lessons that I don't need to learn the hard way. So where can I find plans ready to go for common cabinet sizes that are based on the knowledge of experts who already made all the mistakes?

Thanks,

Dale

Comments (13)

  • 15 years ago
    last modified: 11 years ago

    You won't. Cabinets are built to size from a set of plans drawn up specifically for your kitchen. How they are constructed, and the materials used to do so are as varied as as the number of cabinet makers. Some cabinets don't have even have frames.

    I'd check out your local library , there are many books on building kitchen cabinets , but none will give you a specific blueprint for an 18" - 5 drawer base.

    You might also check out The New Yankee Workshop - they did an entire series a few years ago on building a kitchen.

    All if this begs the question though- what is it that you can't seem to find? There are plenty of manuf. out there from el cheapo Chinaman specials out of bamboo and rice paper to cabinets made entirely from glass and those that have automatic opening and closing doors and drawers.

  • 15 years ago
    last modified: 11 years ago

    Dale,

    If you're going to go to all the trouble of making your cabinets, why don't you go a little further and make them truly custom to fit your space. If you post your kitchen layout here, folks will help you design a nice kitchen. Then you could make your own plans and measure out each cabinet and do a really nice job.

    There are some books and magazines that do show how to make cabinets. Check Google and Amazon for information.

  • 15 years ago
    last modified: 11 years ago

    fine homebuilding magazine has some excellent articles on cabinetbuilding. Easy to read and understand. Also information on installation. If you subscribe to their online magazine you will have access to articles from previous issues that will be helpful.
    If you do build your own cabinets, you can buy the drawers and doors. There are many excellent companies online you can buy from. I would recommend Walzcraft. They are very good to work with.
    Good luck! Cabinetbuilding is fun and satisfying!

  • 15 years ago
    last modified: 11 years ago

    Want mine? I drew them all up, and it's really not that hard. Mine are all totally custom so it's not the measurements, it's the overall concept you need to deal with.

    Mostly, I looked at how other cabinets where made and went from that. We used plywood and full box framing. Our cabinets are very strong and stable because of that, but my husband likes to over-build. Now when I look at ones in the big box store, they look flimsy.

    The best thing also is to finish them before you assemble. here are some box components in the process. I polyied the interiors.

    We started out staining, but I had wanted white and let myself be talked into this - but I hated it once we put them in the kitchen so they are now white (we never made the doors/drawers so it was only the frames and uppers I had to deal with).

    The BIGGEST concern is tools.

    Kreg tool for assembling face frames

    Good quality orbital sander (and you go through a lot of sandpaper)

    A biscuit joiner is really nice too.

    A good quaulity miter saw is a must

    Invest in good quality bar clamps - we could only assemble one or two boxes at a time as that was all the clamps we had

    This is about $300 worth of clamps in use.

    Then there are things like a router and dovetail jig, a good table saw and blades - and don't forget a good dado set.

    We also have a drill press, jointer and planer, though the planer isn't used all that often, but is nice for custom fitting things (our house is 130 years old and not plumb, though the floor is level and the walls are straight because we fixed that).

    We've also bought a large assortment of jigs, clamps and other hand tools as needed. The Speedy Delivery guy who brings our Rockler orders knows us by name now.

    On the good side - we have spent about $3000 in lumber and $1000 in hardware and supplies. Even though we don't have everything done, we have the supplies on hand to finish the job.

    Here is where we are so far. . . I took these yesterday morning.

    We still have a lot of work to do - including the window seat and the small work island - (and install the rest of the soapstone on the cooktop side).

    Yesterday afternoon DH installed some of the end panels, and that makes a huge difference.

    One of the reasons my husband agreed to do this is he used the rationale that the savings on doing it ourselves could justify the cost of the equipment. He figured if we came out having spent total less than $10,000 including the NEW equipment, he would be better off as then he would have lots of new toys in his shop. We already had all the tools or doing construction work since this is our third house, and we've basically had to rebuild most of it. But this is our first major kitchen project. And it's the last part of the house to get done - YEA!!!

    Notice I didn't mention the time - this has taken so much more time than I thought, but I originally thought we could do the whole house in 3 years and we're into year 6 so I'm not good at estimating time LOL!!

    Now I need to go do more painting, and today we can install the rest of the drawer fronts.

  • 15 years ago
    last modified: 11 years ago

    antss, If I go buy cabinets, they come in pretty much standard sizes, in 3 inch steps for width. So standard cabinets are pretty common, right? I was looking for plans for cabinets in those standard sizes. A 21 inch cabinet is only different from a 12 inch cabinet in a few dimensions so standard size plans for 12, 15, 18, 21 inch cabinets, I thought, would be abundant online.

    Of course your post, and the others so far, like plllog and powertoolpatriot, are correct, and I really should do them custom sized to my kitchen. (but it would still be nice to find plans that fit)

    macybaby, thanks for a very informative post. Obviously your plans won't fit but it is a great offer. The pictures are very good and very inspirational. One of the benefits I see in doing them myself is that when it was over, I still have the tools. Of course my wife says I will have the tools and two sets of cabinets: the ones I built and the ones I ordered afterward. :)

  • 15 years ago
    last modified: 11 years ago

    From your post, you really don't have the imagination, knowledge, and, especially, patience to do your own. That's not meant to be insulting, but anyone who's done some woodworking would be able to do their own layout designs for whatever they wanted. You sound fearful of making mistakes, and the only way you learn is to have made those mistakes in the past. There just aren't any shortcuts to doing fine woodworking. It's a matter of trial and error in the beginning, and you're not willing to do those baby steps before you try to fly.

    I'm with Antss, I don't know what you're looking for, but I can't imagine any scenario where what you want wouldn't be available. Certainly, if you want bookmatched ebony veneered doors or solid cherry heartwood, you'll pay for it. But, you won't pay for your learning curve or tools (which run several thousands of dollars).

  • 15 years ago
    last modified: 11 years ago

    We did a "demo" project -the Bathroom. Made some mistakes but it was a good learning project. In the past we've made bedroom furniture for the kids (long ago) and some bookshelves for the house, so we had some basics to start with.

    Here is the bathroom (still need to make one more cabinet).

    And here is another very important thing to consider, even after 30 years of working with power tools, one day (while working on the bathroom cabs) DH got a bit tired and took a risk he shouldn't have.

    Yes, we know all about the SawStop, but the table saw is only one of an assortment of dangerous tools that you'll be working around. Lucky for DH, he has regained most of the feeling in the tip of the finger. He cut through the bone and missed cutting it completely off by about 1/4". He also nicked his index finger.

    Even for us, the kitchen cabinet project has about kicked our behinds. We built this barn, and it took a lot less work and tools than the cabinets. One thing to consider . . .

    I have several of Taunton Press's books on cabinet building. I don't know if I ever found one that had detailed measured drawings to go off of. While my husband can build about anything he has plans for, he can't design well at all. That is where the partnership comes in, I'm very good at providing him detailed designs. Even the barn is one I did the design and build layout for.

    I don't know what your building skills are, but if you don't have some experience in building furniture, you may want to try a simple dresser with drawers and see how that goes. I know a lot of people that thought they would like furniture making, but gave it up after a few projects because it can get very picky. My husband is also rather anal about everything being right on - and that makes a big difference. I'm too quick to say "good enough" just because I'm tired of looking at the darn thing!

    If you are not discouraged by all this, then I'd say "go for it"

  • 15 years ago
    last modified: 11 years ago

    macybaby, I almost forgot the most important thing I noticed from your pictures - a subject dear to my own wife's heart. your sink is lower than your dishwasher! One of the best benefits of making them myself will be that I can get them the height that fits my wife the best. I'm curious, how high are your other counters? My guess is that just a couple of inches lower than standard would make a big difference.

  • 15 years ago
    last modified: 11 years ago

    live wire oak, that's a pretty unexpected response. First off, this is not at all about imagination. And not about fear of making mistakes. The nice thing about human's learning language and how to write is that we now have the knowledge of those who came before us. So instead of starting to make my cabinets with a stone, I can actually start with a table saw. So when others have accumulated knowledge of how to make cabinets based on 7000 years of documented human existence, I am hoping to not have to repeat that history.

    For instance, I can easily draw out a cabinet and measurements for a side and back of any standard size cabinet. But do I make my dado for the bottom, in the sides and back of the box, at 3.5 inches high? If the toe-kick is 3.5 inches (and I don't know if that number is correct), do I make my dado higher than that to make sure there is supporting material for the bottom as it extends past the toe-kick? You see my point? People know these things. I could start cutting, drilling, etc. and practice and work out all the things that it takes to make a cabinet but that wouldn't make much sense, would it?

    So the point of my original post is this: a 15-inch base cabinet is a 15-inch base cabinet is a 15-inch base cabinet. Now there are optional patterns people follow to make cabinets, but once any particular craftsman has settled on his preferred pattern, his 18-inch or 21-inch cabinet is not going to be any different from his 15-inch, except a few dimensions of wood cuts. Based on that, I was hoping to find drawings for making a 15-inch cabinet, an 18-inch cabinet, and a 21-inch cabinet - and so on. This is a repeatable and re-usable pattern; I had just hoped someone had documented it.

    I'm a software technical architect. In the software industry, we look for repeatable patterns in software and business and, once we have designed a solution once for that pattern, we document the solution and we don't have to work from scratch the next time.

    Now, I don't mean to insult you if you're a cabinet maker, but it seems that you're implying that the idea of documenting re-usable patterns does not exist in the cabinet making field.... well, actually, we both know that isn't true, right? If you are a cabinet maker, I bet you have a drawn out plan for just about every size of standard cabinet made. I guarantee you that the big companies do. I was just asking if anyone had ever found such plans available on the Internet.

  • 15 years ago
    last modified: 11 years ago

    macybaby, thanks again for the additional pictures. They're very inspiring. And they highlight my point that learning from the mistakes of others is extremely important. Hopefully I will remember the danger of working when tired and complete this job with all ten fingers still intact. That is one mistake I am definitely afraid of making. (my grandfather built custom cabinets his whole life. He lost a finger long enough ago that I don't have any memory of him with all ten fingers. But he never lost a second one. He's passed now so instead of him, I am here looking for help.)

    In our house, I am the detail person. I always spend many hours planning and drawing out just about everything. Though I would like to have a starting point based on the knowledge of others, and in spite of the opinions of the amateur psychologist in the forum, I am very good at doing tasks like the design and calculations required to plan, cut and build cabinets.

    Now, I may not be great at most of the artisan tasks, such as finishing or hand-cut dovetails, and I may not be fast, many of the tasks in designing and cutting a box for a cabinet are not artisan in nature; they are mechanical, mathematical, and easily repeatable with modern tools. I am confident I can do a reasonable job. No, I don't expect my cabinets to turn out as nicely as what my brother-in-law might make for me for thirty thousand dollars but they will work for me.

    Thanks for the inspiration and great ideas.

  • 15 years ago
    last modified: 11 years ago

    Dale, you could consider using a cabinet-building-system if you want frameless cabs rather than face frame. You buy the jigs for drilling the holes in the panels, then assemble them using special hardware. It's a bit like building your own IKEA kit :) Lee Valley Tools sells the jigs and equipment, as I am sure many other places do.

    Here is a link that might be useful: Lee Valley cabinetmaking system

  • 15 years ago
    last modified: 11 years ago

    dale -

    "Now, ...... you're implying that the idea of documenting re-usable patterns does not exist in the cabinet making field.... well, actually, we both know that isn't true, right? ......... I bet you have a drawn out plan for just about every size of standard cabinet made. I guarantee you that the big companies do. I was just asking if anyone had ever found such plans available on the Internet. "

    of course the plans EXIST ! But, this is exactly what I'm talking about - there being as many set of these as there are cabinetmakers. They also don't want those practices in the public domain so not to give a leg up to new cabinet makers or competitors. You mentioned dadoes, If I were building cabinets I would not have a dado anywhere near my cabinets, and ditto for the Euro vendors we deal with. Would you like a set of their plans for a sink base? The dimensions will all be in millimeters, won't have a face frame and you'll still have to size the doors because they change depending on the exact style that is chosen - so are not on the CAD drawing for a 900mm sink base.

    You are just going to have to come to grips with the fact that YOU are going to have to do the grunt work (shop drawings) associated with whatever style and construction method you choose for YOUR product. It'll be a one time affair AFTER you choose your construction method.

    This METHOD can be arrived at if you'll go get the books and or magazines that have been mentioned here and then decide. FWIW - frameless is the fastest and easiest to construct with the least amount of tooling.

    Before you do anything, do you have a kitchen plan designed for your space and functional needs yet? If not forget all else till you get one as this is the most important thing no matter whether you buy cabinets have them built by someone or whip em up yourself. Which reminds me - why is it you can't find something to fit your needs in the marketplace already?

    If you're really keen on the build it yourself route - get the New Yankee video before you jump in. He is making framed cabinets , but you'll get a real view of everything entailed in manufacturing a complete kitchen.

    More advice: if you really are a detail guy , why not just "assemble" your project? Take that kitchen design and order up some carcass boxes from one of the many firms that specialize in this, order doors and drawer fronts and drawer boxes from the numerous companies that specialize in this area and put them all together in your garage. Manage the "outsource parade". You can specify what you want - let's say a 34" sink base in maple plywood and let someone else worry about whether it will be doweled together or dadoed, or screwed or biscuited or framed ect, and whether the bottom and back need to be 32.5" or 32.75" wide. Most will even provide you with the exact door/drawer sizes for the particular cabinet they send.

    Go to the library, bookstore, New Yankee Workshop site and get yourself a kitchen design before you expend any more energy on looking for a shortcut to a full construction drawing of a 21" base cabinet.

    YOU NEED TO STEP BACK AND DEVELOP A BROAD PICTURE before you flesh out the Details you like dealing with.

  • 15 years ago
    last modified: 11 years ago

    seems like a lot of heat and little light shed from some quarters! i am curios if you found the rosetta stone! i found this post because i am looking for the same guide. any luck since january? your help might save me 11 months!

Sponsored
Custom Home Works
Average rating: 4.6 out of 5 stars10 Reviews
Franklin County's Award-Winning Design, Build and Remodeling Expert