Software
Houzz Logo Print
hzdeleted_10471126

What do i need to refinish this?

18 years ago

So after my post yesterday ....

http://ths.gardenweb.com/forums/load/decor/msg0209410011214.html?11

i think i'm going to paint the hutch and table.

want it to be a nice creamy white color with possibly some glaze..don't want it to look yellow or too dirty though. i don't know anything about this stuff. I was trying to search around online late last night and everything i seemed to find said something differet. Figured someone on here could help clarify pretty quick.

here's a pic of the hutch (one thing at a time!)

{{!gwi}}

What do i need to do? What products do you recommend?

Thanks in advance!

Comments (10)

  • 18 years ago

    Sharee, first you 'll need to use something like liquid sandpaper or TSP to give it a good cleaning and get off built up dirt, grease, etc. I like to use a spray bottle and just wipe it dry.

    A latex primer comes next~take off doors/hardware first, and tape around the glass OR paint carefully. You can always come back with a single-edge razor to scrape off any paint. Wait at least 24 hours or more for the primer to cure.

    I used a small roller and brush when I painted my kitchen cabs. It's better to do several light coats than a couple of heavy coats~I only needed two. It goes pretty smoothly once you get the hang of it.

    IMO, I would leave the tabletop in the natural wood. If you have kids and they spend time coloring, homework, etc, at the table, it might wear off the surface if oil based paint isn't used.

  • 18 years ago

    thanks patty cakes! the table out of the two i plan on using actually has a tile top. I think i'll be replacing that with possibly wood.

    i think this is sort of what color i was looking to do...

    inspiration picture - just the color.
    {{!gwi}}

    could you see it? and how do i do this? what products work best? or should i just bag the glazing idea?

  • 18 years ago

    Patty_Cakes is right. Liquid Sandpaper is my savior!
    It's stinky but boy it sure saves the hands from cramps when it comes to having to sand. Especially all the nooks and crevices.

    I personally like using an oil-based primer if it's something that is going to get a lot of use/abuse.

    I do also lightly rough up the original finish, but just barely, just to get some grip on the original finish.

    Wipe off sanding dust with very lightly damp cloth.

    Apply Liquid Sandpaper according to directions.

    One very light coat of Primer. Let dry.

    Second light coat of primer. Let dry.

    Very, Very light first coat of your base paint. Let dry.
    I've always used regular house paint, water-based.

    Must mention, and this is from lots of experience with drips....make sure whether it's the primer or the base coat that you catch all drips while they are still wet, blend them in.

    I usually wait a week, give the base paint a little time to cure a bit.
    Might be dry to the touch but underneath, it's still mooshy paint.
    Waiting allows some of that mooshy to harden more.

    Then I add a light coat of water-based, non-yellowing sealer. Let dry. Add another coat.
    And sometimes I get lazy and add a third coat of sealer just around handles or other places that will get a lot of wear.

    Example:
    Inside the back of the drawer you can see the original cheapy pine, very shiny finish.
    {{!gwi}}

    New Finish is Base Coat of PonyTail, antiquing and some speckling.
    {{!gwi}}

  • 18 years ago

    amity- "Then I add a light coat of water-based, non-yellowing sealer." so you actually let it dry for the week before this even goes on?
    How do you do the "antiquing". in the pic i have posted for inspiration is that what that look is called? i think i can handle the painting part. just not sure about the glaze/antique finish.
    thanks!

  • 18 years ago

    In one of the links someone gave to you yesterday, Green Oak Antiques, there are directions on how they paint their furniture. Here is the link, scroll down to "How To's". Pretty simple. They use Walmart Country white and dry brush over that with Walmart Antique White. HTH!

    Here is a link that might be useful: paint technique

  • 18 years ago

    ohh i didnt' scroll down far enough yesterday. thanks! i guess i should probably practice on something first before i decide to take on the hutch!

  • 18 years ago

    I have also, antiqued a painted nightstand. After painting and drying, I put some brown stain on cheescloth, squeezed out the excess, and wiped on! It's kind of foolproof! If you put on too much you wipe it off to get the desired amount of "antique". You can go over again to darken also. Not hard. That was the easy part. The good thing is it's not meant to look perfect!

  • 18 years ago

    SO...you think i could use the dry antique thing they talked about then then possibly go over it with the cheesecloth thing. although i don't know how 'dirty/old' i want it to look.

  • 18 years ago

    I've never "dry brushed", so I can't help you there. Don't know how it turns out or if it's any easier. You could experiment on scrap wood first and see which effect you like. In reading the blog of the antique place, she says she can use any color white, tan, or beige from the Oops! section of HD, Lowes or Walmart. Try that first. Also, try the trash to treasure forum. I'm sure they can give details there too!

  • 18 years ago

    there's just sooo many choices it seems like. If someone said use this and that. I would feel better! i think i'll test out some stuff first.
    what do u mean by the Oops section..?
    I did post on the trash to treasure forum this morning also thinking i would get some responses there so far i got nothing. ...seems like this place has the most traffic.
    Think the hutch would look ok painted..glazed?? with some different hardware?

Sponsored
AIS Renovations
Average rating: 4.5 out of 5 stars15 Reviews
Custom Craftsmanship & Construction Solutions in Franklin County, Ohio