A clean, dull surface is important. The pine cleaner may cause adhesion problems if it's not thoroughly rinsed. Rinse again with warm water to be sure.

Sand the panels dull with a #180 grit sanding sponge and remove the dust. Most bonding primers do not require sanding, but if you're seeking maximum adhesion, you'll want to sand.

Prime with a bonding primer like Zinsser Bulls Eye 1 2 3.

Paint with two full coats of 100% acrylic latex paint.

Use quality primer and quality paint for a long lasting, beautiful finish.

If you want a smooth finish, use the Wooster Jumbo Koter system and backbrush with a 2 1/2" Chinex brush. The backbrushing is intended to knock down the roller stipple. A light, quick brushing is all that is required.

Michael

Thank you! I will make this my project today (if my body stops complaining about yesterday long enough to get out of bed!). Now I have something to do while DH works on drywall.

Consider it exercise instead of work. It's more rewarding that way.

Michael