Software
Houzz Logo Print
sotodog

Painting Paneling

19 years ago

We bought an investment home which needs some work. This will be a rental so we're not inclined to remove and put drywall up. We're hoping painting it will do the trick. The other rooms need wallpaper removed and some other weird wall covering. Anyway, there are 2 rooms which have light color paneling. We would like to cover it up easily and cheaply. Any tips or suggestions on what to do?

Comments (2)

  • 19 years ago

    I recently painted cheap paneling in one room. (My house has paneling in part or all of SEVEN rooms, but some of it is old, higher-quality pine. Where I'm painting, it's a thin substrate with something applied or printed onto it.)

    I followed instructions I read here: First, wash it with a TSP substitute. The JASC brand of No-Rinse TSP Substitute is often recommended, but there are others. Wear gloves.

    Then patch where needed and prime. Bullseye 1-2-3 was the recommended primer; it's a latex primer that will stick to paneling.

    I used Prep-Rite (Sherwin-Williams) and had it tinted to approximately the color of the finish paint. If you are having primer tinted (not necessary if the paint will be white or off-white), use no more than 75% of the colorant formula for a light color. This is because primer is not as white as the light base in most paints, and at 100% it would be darker than the finish paint.

    For finish paint, I used a satin. Although I really prefer walls to be flat, with no sheen at all, painted paneling is obviously paneling, and wood looks better painted with a satin or semi-gloss, but semi-gloss is too shiny for walls, in my opinion.

    Painters will tell you to use two full coats even over primer, but with tinted primer you may be satisfied with one coat of the finish paint, especially in a rental where you can expect to repaint it fairly frequently.

    Painting does nothing to conceal the grooves in paneling, but I don't mind them when it's "imitation" paneling like what I was painting and they're not deep. There are various ways of concealing them, including hanging lining paper (usually applied to a rough wall to allow wallpaper to go up neatly), but all of them are more complicated than you probably want. Merely painting paneling is hardly any more effort than painting any other wall.

  • 19 years ago

    sotodog-

    We are finishing up on a new home build and have poplar butterfly edge paneling throughout the downstairs (yes, we did it on purpose, we actually like paneling, and we know we are in the minority). We didn't have to wash it cuz it was new, but sanded it down with an orbital sander then painted 1 coat of Bin, 2 coats of primer and 2 finish coats. The DR is a deep roasted tomato red and we used dark grey primer, but we used white primer (BM Fresh Start) on the rest of the walls. We used BM or C2 paint and BM primer on all surfaces and are very pleased with the outcome.

    Kitchen:

    Living room:

    Good luck-

    sandyponder