Software
Houzz Logo Print
lisalisa2009

Backsplash layout Question for tile expert

17 years ago

How do you tile around the corner. i want to put tile in a diamond pattern, but DH doesn't think it can be done. (see below microwave to the right). would appreciate any expertise. thanks!


{{!gwi}}

Comments (8)

  • 17 years ago

    Wouldn't you just use bullnose on the corners? I'm certainly no expert... I'm not even at apprentice level but it makes sense to me. I'm sure Bill or another one of our resident tile experts will chime in. I'll look forward to seeing the CORRECT answer to this!

  • 17 years ago

    It can ablolutely be done -- though some tiles will be better-suited for it than others, and your tile installer will need to be both skilled and careful.

    For the inside corner, it's simply a matter of 'folding' the tiles (imaginarily, of course) while allowing space for the tile thicknesses, then continuing the pattern.

    But for the outside corner, you have a few options:

    1 - Bevel the back sides of the tiles at the edges and butt them together, rounding the corners slightly after installation so the edge won't be sharp. This solution would work well for natural stone tiles, may work for through-body porcelain, but might not work particularly well for some glazed ceramics. (You couldn't sand the surface post-install, so sharp corners with posibly 'chippy' edges.)

    2. - Lay one side over the other. This is the easiest method and what is done most often down here, but it wouldn't be the most attractive.

    3. - Use a corner piece. Many tile lines have a long skinny piece called a quarter-round that is designed to fit over outside corners. To use a quarter round here, you'd tile to the edges of the quarter round on each side, then run the quarter-round straight down on the corner. It's a very clean look. You could also use a narrow strip of bullnose-edge tile (available in more tile lines) to cover one side of the corner and tile edge, but this wouldn't look quite so polished.

    A way to get around it, which could be very attractive in your particular layout, is to 'frame' the area over your range, having the frame end at the outside corner. Your frame-piece would act like the quarter-round, providing a nice transition.

    I like fancy tile layouts, and have 'cornered' my hubby into doing ALL of these things (except #2), so I can post pictures if my words aren't making sense.

  • 17 years ago

    sweeby, I would love to see pictures of these options.

  • 17 years ago

    OK - The first shot is the #1 option -- Tiles beveled on the backside, butted together, then smoothed on the corner. This one is done on natural travertive:

    This next shot is #3, but done using an outside corner piece rather than a quarter round since there's so little tile on the other side. The two below the photo show what the quarter-rounds look like.

    This one shows an outside corner using a bullnose (the green) on one side. It's not done with a diamond layout, but you can still get the idea.

    And this last shot is of an inside corner illustrating the 'fold' idea.

  • 17 years ago

    thanks for your replies. you guys are great, really!

    i'd like to put a frame with pencil tiles and a design in the center behind the stove.

    but then once i turn the corner i wanted to continue one bottom row of tiles, then 3 rows of glass tiles, then diamond pattern tiles. do you think it will look strange if the pattern starts with the bullnose then the glass tiles.

    {{gwi:1558946}}

  • 17 years ago

    I think you should draw it all out on graph paper to scale in order to "see" it.

  • 17 years ago

    There are really two options. Either you use a ceramic bullnose, in which case the pattern is broken, or you either use a bullnose strip, or miter the tiles (sweeby's first pic), where the pattern continues (in either case), and gets "folded" around the corner. In either case, it's very doable.

  • 17 years ago

    Just wanted to chime in to let you know that I think your granite and backsplash are beautiful! I love how you're putting the glass tiles as an accent. Can't wait to see the finished product. Good Luck!

    Barb