Single Sink Selection....'D' or rectangular???

14 years ago

We want to get a 9" deep single SS sink in our small kitchen remodel. We will have custom cabinets built (and the base cabinet under the sink will, hopefully, have at least one trash pullout (maybe two?!)

Even though we can make the cabinet/sink any size, I don't want to "give up" any more counter space than necessary. Having said that, I still need a good sized sink and don't want to make a mistake by going too small.

I've seen the "D-shaped" sinks and, of coure, rectangular ones. Which shape do you think is better and why? What size would be the smallest you'd put in if you only had about 106" length with the sink centered and the DW to the right of it? I'd like to keep the base cabinet under 36", if possible....Maybe 32"???

Lastly, is there any need to go to 16 gauge SS? The granite fabricator will "throw in" an 18 gauge sink (SS 304 and 18/8 Chrome Nickel Content) by Stone (Universe series). I like the idea of using his sink if it isn't of inferior quality. One of his is what I think is called the "D shape" (slightly wider and rounded at the top on the left). The other is a slightly smaller rectangle (inside measurements of 16 x almost 30")They both say they take a 36" base cabinet, but since the cabinet maker can make it any size, I'm hoping he can get it in a smaller base?

Sort by:Oldest

Comments (5)

joaniepoanie
14 years ago
We have a 30" sink base and the selection that fit was limited. The larger the base cabinets, the more selection/options you will have, including Silgranit which people here rave about. However, we ended up with a Blanco Stellar sink..I think the Model # is 441024 and so far (one-month in) I find it plenty big enough. It is 18 gauge and our cabinet guy said 18 gauge is fine, no need to go 16. It is rectangular...I've never had D shape so can't comment on that. The best price for this sink was at Quality Bath.com......Also, with a 30" base, you may not have room for a trash pullout, especially if you have a garbage disposal.
fivefootzero
14 years ago
I like our D-shaped sink. Got a great deal from faucetdirect.com. It's a Kraus. Our base cabinet is 33". The window above is 31" inside measurement.

I have never NOT been able to fit a cookie sheet, baking pan, or anything in it. Even better I love the grid at the bottom, which came with it (normally they are an expensive accessory).

Here is our sink:

Here is a link that might be useful: Kraus KBU-10 sink
Related Professionals
Mason City Kitchen & Bathroom Designers · Beatrice Kitchen & Bathroom Designers · Chatham Kitchen & Bathroom Designers · Bowling Green Kitchen Remodelers · Salisbury Kitchen Remodelers · Waterbury Kitchen Remodelers · Las Vegas Kitchen Remodelers · Eugene Kitchen Remodelers · Amherstburg Kitchen Remodelers · Indianapolis Custom Countertops · Kankakee Custom Countertops · Hackettstown Custom Countertops · La Crosse Custom Countertops · San Luis Obispo Custom Countertops · Denver Custom Countertops
minty19
14 years ago
We just installed (this week!) the Ticor S115. It is a combination of rectangular and D shape... very pretty and I learned about it here on GW. I have a 33' cabinet. I bought it online at galaxy tool supply for $213. It's 16 gauge and comes with the grid, a cutting board, and rinsing basket. A great deal. Check it out.

Here is a link that might be useful: Ticor S115 thread
krabbypatty
14 years ago
There are lots of good threads on this already. Google "D-shaped sink, gardenweb kitchens" and you will find them.

I had a single D-shaped sink in my previous kitchen. Loved it. Fit lots.
sarapamela
Original Author
14 years ago
Great information! The Ticor S115 sounds like it might work out well, and I love that it can fit in a 33" cabinet. Seems like a good sized sink and I'd still "save" 3". Amazing how just a few inches really matter when dealing with a tiny condo kitchen : ) Thank you all for your help with this!