Software
Houzz Logo Print
coolbeansw

Glass Tile Backsplash Jitters

15 years ago

Just signed a contract for having a glass tile backsplash installed, and want to insure that it's done right. Tiles are 4"x4"x5mm. Wall is not perfectly flat. Tiles will run from granite counter to bottom of upper cabs in standard stack.

(1) Okay for thinset to be applied directly to sheetrock? (That's what contract specifies - no backerboard or other membrane)

(2) Any recommendations for bright white thinset? (Glass tile is light blue)

(3) Silicone bead between counter and tile?

(4) Any recommendations for type of grout?

TIA

Comments (7)

  • 15 years ago

    Yes, thinset can be applied directly to sheetrock. However, depending on the flatness (or lack thereof) of the wall, you may want to float the wall to make it flat first.

    Floating the wall would typically mean putting a layer of mud and lathe (to help hold up the mud) and some tar paper.

    The grout depends on such factors as the width of the grout line, personal preferences, tile reseller recommendations.

    For 1/16 wide grout lines- typically unsanded grout.

    You could choose to use epoxy grout. Part of the decision depends on the tile and grout color.

    Others would use silicone.

  • 15 years ago

    For our glass tile backpsplash, we were told highly-modified thinset had to be used. Our tile is white, well, clear glass, painted white on the back, so our tile guys used white thinset. They applied it directly onto the sheetrock.

    Ours is a mosaic that was mounted on mesh backing, so the grout line width was pre-determined. I believe they mixed up unsanded grout with some sanded grout (I have the ratio/proportions written down somewhere if you want it). We used regular TEC grout. If we were doing it today, we'd have them use TEC XT grout (more stain resistant, more crack resistant, with anti-mold and mildew agents already in it).

    They ran a bead of TEC siliconized latex caulk (in a matching color to the grout) at the base of the tile, where it meets the granite.

  • 15 years ago

    My tilesetter did a proper mortar bed for mine (also fixing the cant of the walls), as well as an anti-fracture membrane. The manufacturer recommended bright white grout, and I think the thinset was also white. (Also light blue tiles.) No counter. It's a wall in the laundry which runs behind the sink and washer, so I don't know about the silicone. The bright white color was important, and sanded grout is generally recommended for glass mosaic (probably larger as well), plus mine is bevelled so needs the sanded anyway. I believe mine was done with Laticrete, but there are other quality grouts as well.

  • 15 years ago

    Here are some instructions I found on Anchor Bay Tile's website. HTH!

    Here is a link that might be useful: Instructions on glass tile installation

  • 15 years ago

    (2) recommendation for bright white thinset? (Glass tile is light blue)
    Yes.
    (3) Silicone bead between counter and tile?
    Yes.
    (4) recommendations for type of grout:
    Search and read up on "Grout Boost"; it's a white liquid that replaces the water in grout. Very good for this application. Kitchen backsplash.
    (1) thinset applied directly to sheetrock
    Yes, but thinset can be applied twice. Once to make it straight and true, once to set tile.
    Wall is not flat. Tiles, 4"x4"x5mm, will not look good unless the warp is straightened.
    Tile will run from counter to upper cabs, on one wall only.

    Is your grout going to be white?

    Hth

  • 15 years ago

    Thanks for your all's input. I thought I wanted blue grout as close to the color of the tile that I could get, but the person at the tile store said that it's a mistake because each tile "pops" less. She recommends white or light grey. My cabs are very pale grey and the counters are diamond black granite (with lots of silver flecks). I do want to downplay the grout. Contract calls for me to supply the grout -- so I need to make an intelligent purchase.

  • 15 years ago

    Maybe you can find a blue in the same color family, but a lighter than your tile color. This way it won't stand out, but the tile will still "pop" somewhat.

    FWIW we tried to find close color and intensity grout-tile matches for all the tile in our house. Just our preference.

Sponsored
AIS Renovations
Average rating: 4.5 out of 5 stars15 Reviews
Custom Craftsmanship & Construction Solutions in Franklin County, Ohio