Software
Houzz Logo Print
muscat_gw

another backsplash question- aesthetics and technical issues

18 years ago

OK, so I have a backsplash plan, and I'm drowning in a few details. Most of my backsplash will be between counters and upper cabinets, but on the wall with the range/hood it is more open, and I plan for it to look like the picture below.

{{!gwi}}

{{!gwi}}

One question/problem: Is it weird to just have the tumbled edge of the tiles along the vertical edges of the whole splash? I dont like prominent edge pieces, and they had no simple bull nose edge for this tile- they were all very big and shapely. Also, you can see that I have a "stairstep" effect going on under the range, and since those edges will just be the edge of the tile, it is OK to just have my other edges like that?

I know that doing a stairstep is a little odd. As a novice tiler, will I have a hard time making that edge look nice?

Also, on this wall, I planned to cut tiles as needed at the level of the counter, not up above, since I want to have the upper edges nice and tumbled. Ont he other walls, where the upper cabinets will mostly hide that upper edge, I planned to do the opposite. Is this ok?

Last fear- for the moment at least. Most of these tiles are 4x4, 2x4 and 2x2 in a random pattern. Scattered in that, I'll replace the 2x2's with a few sonoma tantrum glass tiles, sort of like this:

{{!gwi}}

These tiles are 2 3/16 x 2 3/16. Bummer. So, my plan is to have 3/16" grout lines, so that when I'm fitting in these glass tiles, they'll fit without disturbing the pattern, but will just have really tiny grout lines. Is this a reasonable plan?? I'll make sure ahead of time that wherever I plan to insert a glass tile, the edges of the tumbled marble are really regular.

I'm feeling a bit in over my head.

:)

Comments (5)