You need to make sure you have EasyTouch 2.0 firmware. If you have 2.0 firmware, you have to define each light on each AUX as an IntelliBrite circuit function.

You also need to configure the light under lights.

The firmware is 2.0. I should clarify, I can use the light, it is just difficult to change the color of the light. It seems like the color change works one in 30 tries.

Are you having trouble with a particular code or mode or does this happen no matter what color/mode you choose?

If you use the outdoor interface and choose one of the colors and modes, do you hear the relays clicking on and off? Are the relays consistently clicking on and off (same timing on and off) or is it stuttered? Are your IntelliBrite lights connected to one or more relays? If one relay, it could be that your relay is sticking.